Adjustable Desk for Standing

The StandDesk was produced by millennials, is marketed directly at millennials, as well as has actually been gobbled up by millennials in remarkable quantities. While it brings a ten-year warranty (the lengthiest of any Chinese-made base), in this situation it’s not necessarily a trusted indication of the expected helpful life of the lifting columns. For the rate, the StandDesk is an excellent lower-cost option to the UpLift, Jarvis and also other Chinese-made desks. Regardless of its stability issues this is a much much better item than the Autonomous SmartDesk or IKEA Bekant might ever want to be, and also a good value on the whole. It’s the mid-priced offering in the broad category of Chinese-made workdesks that is swaying consumers from both its cheaper as well as pricier peers.

StandDesk Building, Setup, as well as Gadgets

Building the desk is rather straight forward if you comply with the comprehensive directions. Every one of the screws, bolts, washers, as well as springtime washers can be found in different bags that are noted with their destination: tabletop, frame, and spares. There’s an included hex tool for attaching all of the bolts into the framework, or, pop in a hex bit right into your power tool– simply be careful not to over-tighten.

Every one of the parts have an excellent quality finish to them with rounded corners to avoid cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot setting up likewise includes height-adjustable turning gears to support the front-to-back activity of the desk, which was really handy for the carpeted office flooring. I’m also using a flooring mat to secure the carpeting from chair wheel damages at sitting height, and press the chair when I’m transitioning to standing elevation.


The deluxe controller deserved the financial investment. The switches are all variable pressure set, indicating the up and down arrows will readjust the height by 1/10th of an inch with a solitary press, or constantly adjust the height by about 0.7 inches per 2nd if you hold the button for two seconds. The memory switches are similar in design: press to recall the elevation setting, or hold the button down for five seconds to keep a new height value. I’m making use of button 1 for my resting position as well as switch 4 for my standing position, which offers me 2 and also 3 for anything I might require in the future.


Utilizing my Standdesk

I’ve been utilizing the brand-new workdesk for a couple of weeks as well as have actually documented my preliminary perceptions:

The electric motors are quiet but can be heard in the next space over. It takes possibly 25 seconds for the desk to totally transition from resting to standing based upon my presets.
I utilize an Ergotron side-by-side check arm (specifically this LX design), triggering the desk to obtain a little rocky when I move my weight versus the keyboard. In knowledge, I ought to have purchased the bar upgrade for my workdesk after determining the weight of my displays. If you prepare to do a dual monitor configuration, get the bar.

Because gravity compresses the discs in a human back, I require to increase the desk greater in the early morning as well as lower it at night.

An anti-fatigue mat is definitely necessary for long duration standing. I acquired an Octagonal mat from SmartCells, making use of rubber “cells” that are imagined listed below.


Despite any kind of issues I may have had with the handset or the cookie-cutter layout, practically all of those problems removed when I in fact came down to using this point.

I didn’t believe it was even feasible, the StandDesk somehow handles to be also a lot more secure than the Jarvis, both at resting and standing elevations. Many days I like to run my Jarvis at max elevation while pushed versus my wall; not always due to the fact that it’s that shaky, but even if I want as much security as I can obtain.

The StandDesk one ups the gambit even additionally, proving to be equally as stable by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they declare includes much more security when acquired as a part of the plan deal.When it pertains to weight tolerance, the StandDesk shares yet even more stats with the Jarvis, being ranked for up to 350 pounds of weight capability.

I have actually been making use of the desk for regarding three weeks now for day-to-day job (and also adhering to standing desk best methods), whether it’s typing out reviews such as this one from our desktop computer or a laptop computer every so often. The desk holds up well versus non-coastered drinks, and the finish on top of the desk still feels just as smooth and also slick as the day I opened it despite days of sweaty wrists wresting on it as well as several clean downs with a rag.

I never ever purposefully try to damage any type of desks also hard, during some lighter examinations (throwing a set of tricks onto it from a distance, for example), it still held up without as well several visible signs of damages.

Finally, when I determined the sound output of the desk while it climbed from a sitting placement to standing as well as back once more, it was without a doubt the quietest we have actually examined yet. I can barely get it to make more than concerning 9.5 dB of noise, so if your largest issue is the whirr of your electric motor, this is absolutely the one for you.

Customer Service

Currently, typically I don’t consist of much concerning the client service support of any type of given firm, only since I really feel that generally if an item works the method its intended to, I shouldn’t ever before have a reason to call them in the first place. And while I want I might state that was the case throughout my experience with StandDesk, I just can’t finish this testimonial without stating the many, seemingly endless issues I experienced trying to get my workdesk assembled.

For starters, the desk I was sent really did not have any kind of memory handset included initially, which meant I had no way of really managing the up/down feature on the desk itself. I got in touch with StandDesk regarding this problem, who returned to me around a day later on with an apology as well as a promise that a brand-new one would certainly be shipped quickly.

Standdesk evaluation handset

The resource of all our troubles …
About four days later on a handset arrived in the mail. The mobile phone at first turned on, but it wasn’t long before I saw that none of the programmable buttons worked, nor did the down button, but for some factor the “memory” button dealt with the down feature simply great. I contacted the business again, as well as they apologized for the mixup and said they would certainly have a new panel as well as control box bent on me within the week.

Over 2 weeks later my brand-new panel and also control box arrived. Once I installed them both the desk finally started working the way it was supposed to, but not after virtually a month of waiting and back and forth with a company that couldn’t bear in mind to deliver a core component of their product inside the same box from the get-go.

Points to Think about

Regardless of its bankable features, this stand up workdesk additionally has its own disadvantages. Because no particular stand desk might catch all of the functions that you may require, you might think about these in your decision-making.

Lack of a Crossbar as criterion

Not having a maintaining bar is certainly not a deal-breaker, especially thinking about several of our various other favorite workdesks such as the Fully Jarvis also don’t have one. Actually, this desk does have one if you desire, but it is a paid add-on (much more on this later on as well).

The crossbar is seen by some as a limitation, making it tougher to position your legs easily listed below the desk. Others, on the other hand, discover that they supply added stability, often essential when workdesks are completely extended.

We have not read any type of complaints of the stability of this workdesk, so we don’t think its something to actually be worried regarding, although if you truly desired a workdesk with a crossbar after that we suggest you take a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does offer a different add-on crossbar that you can add to the desk on your own, just for an extra $49.95.


The stability of a standing workdesk is just one of the most important facets of these workdesks. Without a stable workdesk you’ll locate it tough to concentrate, which might cause you ending up being much less interested in making use of the desk at standing elevation. To obtain the very best return on your investment, you’ll wish to be happy when using the desk.

Due To The Fact That the StandDesk Simple is the initial workdesk that I have examined with an optional cross support, I will break down my security examinations right into two sections. Both examinations will consist of the common front to back shaking examination and also an entrusted to appropriate wobble. The first will certainly lack the cross assistance as well as the secondly will be with it. Simply to keep in mind, claims that the enhancement of the cross support can raise security by up to 15%. I have no suggestion exactly how they thought of that number.

Without Cross Assistance

Left to Right: The wobble examination was a different situation. StandDesk Simple was the second workdesk that I tested that wobbled near the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the rocking movement misbehaved. Yet factor it would influence your job.

With Cross Support

Front to Back: Including the cross support does not influence the shaking activity. The StandDesk Simple began to experienced a rocking motion at 36″. By 41″ the shaking movement misbehaved.

Left to Right: Including the cross assistance to the StandDesk boosted the wobble movement for lower elevations. With the cross assistance the wobble activity really did not start up until you reached 35″. By 39″ the wobble motion came to be bad.

Note: It’s very vital with flexible standing workdesks to completely tighten all hardware. If there is hardware that is not completely tight, the activity experienced when encompassed standing height will certainly be exaggerated. This is particularly true with a workdesk framework that includes 32 bolts, there are much too many points at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we’ve examined in our laboratories, we have to tighten our referral on the StandDesk Pro to much shorter individuals with narrower desktops, as the stability simply isn’t there for a big mass raised high off the ground. American-made desks will certainly be much better suited to these applications, and also for a rather apparent reason. Essentially all American-made bases are made in United States manufacturing facilities that are possessed by Swedish, Danish or German companies that created this market, as well as their typical citizens are a whole lot taller than the ordinary Oriental consumer, so they started making longer-stroke lifting legs a very long time ago. As well as they have far more robotic automation, laser-cutting tools, and sheer experience making standing desk bases, needless to say.

If you’re not also tall, do not have an excessive quantity of hefty equipment on your desktop, and also don’t need also wide of a workdesk, the StandDesk Pro will certainly give you good bang for your buck.

All that may change with Yu’s promised StandDesk Pro 2.0 design that he expects to release at some point in the future. Initially we were told we ‘d see it by June 2018. More than a year later it has yet to emerge, and also Yu states he’s had trouble obtaining the item high quality he requires out of numerous Chinese manufacturing facilities he’s tried dealing with. The brand-new design is allegedly going to be a lot easier to set up as well as have a heftier crossbar layout, among other refinements. He claims the new base will certainly be used in both a “T-Leg” as well as “C-Leg” arrangement, relieving our issue about side-load emphasizing on the lifting columns.

If this brand-new base ever before concerns market we’ll update you here. But we’re not holding our breath any kind of longer as one of the most current information on the business is that Yu closed the small Los Angeles workplace as well as has actually moved it to join with all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with remarkable efficiency has actually been present with the brand-new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electrical standing desk. While limited in dimension and shade alternatives, it has actually taken the mantle far from StandDesk’s long-ago status as the best standing workdesk under $400.

error: Content is protected !!