Adjustable Desk Frames

The StandDesk was produced by millennials, is marketed right at millennials, and has been gobbled up by millennials in excellent volumes. While it carries a ten-year guarantee (the longest of any Chinese-made base), in this instance it’s not always a dependable indication of the anticipated beneficial life of the lifting columns. For the price, the StandDesk is an excellent lower-cost alternative to the UpLift, Jarvis and also various other Chinese-made workdesks. Despite its security issues this is a much better item than the Autonomous SmartDesk or IKEA Bekant can ever wish to be, and also a good value in general. It’s the mid-priced offering in the broad category of Chinese-made desks that is swaying consumers from both its less expensive as well as costlier peers.

StandDesk Building, Setup, as well as Devices

Constructing the desk is rather straight forward if you comply with the comprehensive guidelines. All of the screws, bolts, washers, as well as spring washers can be found in different bags that are noted with their location: tabletop, framework, and spares. There’s a consisted of hex tool for fastening all of the screws right into the structure, or, appear a hex bit into your power device– just be careful not to over-tighten.

Every one of the parts have a top quality finish to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!


The foot setting up also consists of height-adjustable rotation equipments to maintain the front-to-back movement of the desk, which was really practical for the carpeted office flooring. I’m additionally utilizing a flooring mat to shield the carpeting from chair wheel damage at resting elevation, as well as press the chair when I’m transitioning to standing elevation.


The luxurious controller deserved the financial investment. The buttons are all variable pressure programmed, implying the up and down arrows will certainly adjust the height by 1/10th of an inch with a solitary press, or continually readjust the height by about 0.7 inches per 2nd if you hold the button for two secs. The memory buttons are similar in layout: push to remember the height setup, or hold the button down for 5 secs to store a brand-new height worth. I’m making use of button 1 for my sitting setting and switch 4 for my standing position, which offers me 2 and 3 for anything I might need in the future.


Utilizing my Standdesk

I’ve been making use of the new workdesk for a few weeks as well as have jotted down my initial impacts:

The electric motors are quiet however can be heard in the next space over. It takes probably 25 seconds for the desk to totally change from resting to standing based on my presets.
I utilize an Ergotron side-by-side check arm (specifically this LX model), causing the desk to obtain a little rough when I move my weight against the key-board. In hindsight, I should have purchased the crossbar upgrade for my desk after identifying the weight of my monitors. If you intend to do a dual screen setup, obtain the bar.

Because gravity presses the discs in a human spine, I require to increase the desk higher in the early morning as well as reduced it in the evening.

An anti-fatigue floor covering is absolutely necessary for long duration standing. I acquired an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are envisioned listed below.


Despite any type of problems I may have had with the mobile or the cookie-cutter design, pretty much every one of those problems gotten rid of as soon as I actually got down to using this thing.

I really did not think it was also feasible, the StandDesk somehow handles to be also much more stable than the Jarvis, both at sitting and also standing heights. Many days I such as to run my Jarvis at max height while pressed versus my wall surface; not always because it’s that shaky, however even if I want as much security as I can get.

The StandDesk one ups the gambit also additionally, confirming to be equally as consistent on its own at standing height as the Jarvis is with wall support. This is all without the business’s crossbar enhancement, which they assert adds a lot more stability when purchased as a part of the package deal.When it involves weight resistance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 lbs of weight ability.

I have actually been utilizing the desk for about three weeks now for everyday work (and adhering to standing workdesk finest practices), whether it’s typing out reviews similar to this one from our desktop or a laptop once in a while. The desk holds up well against non-coastered drinks, as well as the finish on top of the desk still feels equally as smooth and slick as the day I opened it regardless of days of perspiring wrists wresting on it as well as several wipe downs with a dustcloth.

I never ever deliberately attempt to dent any kind of workdesks too hard, during some lighter examinations (throwing a set of secrets onto it from a range, for example), it still held up without also numerous visible indications of damage.

When I determined the noise output of the workdesk while it rose from a sitting position to standing as well as back again, it was by far the quietest we have actually checked. I might barely get it to make greater than concerning 9.5 dB of sound, so if your largest problem is the whirr of your electric motor, this is most definitely the one for you.

Client service

Currently, usually I do not consist of much concerning the customer care assistance of any provided firm, only since I feel that as a whole if a product works the means its expected to, I shouldn’t ever have a factor to call them in the first place. And while I wish I could say that held true throughout my experience with StandDesk, I merely can’t finish this testimonial without discussing the numerous, seemingly countless troubles I experienced attempting to obtain my desk created.

For starters, the desk I was sent really did not have any kind of memory mobile phone consisted of originally, which suggested I had no way of really regulating the up/down feature on the desk itself. I contacted StandDesk concerning this problem, who got back to me around a day later with an apology and also a guarantee that a new one would be shipped out soon.

Standdesk testimonial handset

The source of all our troubles …
Concerning four days later a phone got here in the mail. The phone at first switched on, however it had not been long prior to I saw that none of the programmable switches worked, nor did the down button, but for some factor the “memory” switch managed the down function simply fine. I called the company once more, and also they apologized for the mixup as well as claimed they would have a new panel and also control box bent on me within the week.

Over 2 weeks later on my new panel and also control box showed up. When I mounted them both the desk finally started functioning the method it was meant to, however not after almost a month of waiting as well as to and fro with a firm that couldn’t remember to ship a core element of their product inside the same box from the get-go.

Points to Take into consideration

In spite of its bankable functions, this stand workdesk also has its own drawbacks. Because no particular stand desk could record all of the functions that you might require, you might think about these in your decision-making.

Absence of a Bar as requirement

Not having a maintaining crossbar is absolutely not a deal-breaker, especially thinking about some of our other preferred workdesks such as the Completely Jarvis also don’t have one. This desk does have one if you desire, yet it is a paid add-on (much more on this later as well).

The crossbar is seen by some as a limitation, making it harder to put your legs conveniently below the desk. Others, on the other hand, find that they supply added stability, usually critical when desks are completely extended.

We have not review any issues of the stability of this desk, so we do not assume its something to really be worried concerning, although if you actually desired a workdesk with a crossbar then we advise you take a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does provide a separate add-on crossbar that you can include in the desk yourself, just for an added $49.95.


The security of a standing desk is one of one of the most crucial aspects of these desks. Without a steady workdesk you’ll discover it difficult to focus, which could result in you coming to be less thinking about using the desk at standing height. To obtain the very best return on your investment, you’ll intend to more than happy when utilizing the desk.

Because the StandDesk Simple is the first desk that I have actually evaluated with an optional cross assistance, I will break down my security examinations into 2 areas. Both tests will certainly include the typical front to back rocking examination and a delegated right wobble. The very first will be without the cross support and the secondly will certainly be with it. Simply to keep in mind, says that the enhancement of the cross support can increase stability by as much as 15%. I have no idea exactly how they created that number.

Without Cross Assistance

Left to Right: The wobble examination was a different circumstance. StandDesk Simple was the 2nd desk that I examined that tottered at the bottom with weight on the desktop. The initial was the IKEA Bekant. By the time it reached 36″ the shaking motion misbehaved. Beyond this factor it would certainly influence your job.

With Cross Assistance

Front to Back: Including the cross assistance does not influence the rocking movement. The StandDesk Simple began to experienced a rocking motion at 36″. By 41″ the rocking motion misbehaved.

Left to Right: Including the cross assistance to the StandDesk improved the wobble activity for lower heights. With the cross assistance the wobble motion really did not start up until you got to 35″. By 39″ the wobble activity became poor.

Note: It’s very essential with flexible standing workdesks to completely tighten all equipment. If there is hardware that is not entirely tight, the motion experienced when included standing elevation will be exaggerated. This is particularly real with a desk frame that includes 32 screws, there are far a lot of factors at which the desk has a chance to relocate.


Like all the Chinese bases we have actually tested in our laboratories, we need to narrow our referral on the StandDesk Pro to shorter customers with narrower desktops, as the stability just isn’t there for a huge mass elevated high off the ground. American-made desks will certainly be much better suited to these applications, as well as for a relatively apparent factor. Basically all American-made bases are made in US manufacturing facilities that are owned by Swedish, Danish or German companies that created this sector, and their typical citizens are a great deal taller than the ordinary Oriental consumer, so they started making longer-stroke lifting legs a long time back. As well as they have far more robot automation, laser-cutting equipment, as well as sheer experience making standing workdesk bases, it goes without saying.

Yet if you’re not as well high, do not have an extreme amount of hefty devices on your desktop computer, and also don’t require too wide of a workdesk, the StandDesk Pro will certainly give you good bang for your buck.

All that might alter with Yu’s promised StandDesk Pro 2.0 design that he anticipates to release at some point in the future. Originally we were informed we ‘d see it by June 2018. Greater than a year later it has yet to materialize, as well as Yu states he’s had problem obtaining the product top quality he needs out of several Chinese manufacturing facilities he’s attempted dealing with. The new style is allegedly going to be much easier to put together as well as have a heftier bar layout, to name a few refinements. He states the brand-new base will certainly be offered in both a “T-Leg” as well as “C-Leg” configuration, relieving our worry regarding side-load emphasizing on the training columns.

If this brand-new base ever comes to market we’ll update you right here. We’re not holding our breath any kind of longer as the most recent news on the firm is that Yu closed the little Los Angeles workplace as well as has transferred it to join with all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with impressive efficiency has actually been introduce with the brand-new joint endeavor between US-based iMovR and China-based Eureka, the i1 electrical standing desk. While limited in size and color alternatives, it has actually taken the mantle away from StandDesk’s long-ago status as the very best standing workdesk under $400.

error: Content is protected !!