Adjustable Desk Motor

The StandDesk was developed by millennials, is marketed directly at millennials, and also has actually been demolished by millennials in outstanding volumes. While it lugs a ten-year warranty (the longest of any type of Chinese-made base), in this case it’s not necessarily a trustworthy indicator of the anticipated useful life of the training columns. But for the cost, the StandDesk is a wonderful lower-cost choice to the UpLift, Jarvis and other Chinese-made workdesks. Despite its stability issues this is a much much better product than the Autonomous SmartDesk or IKEA Bekant could ever before intend to be, and also a good value on the whole. It’s the mid-priced offering in the wide category of Chinese-made desks that is winning over clients from both its cheaper and more expensive peers.

StandDesk Building, Setup, and Gizmos

Building the desk is rather straight forward if you comply with the in-depth directions. All of the screws, bolts, washers, as well as springtime washing machines can be found in different bags that are marked with their location: tabletop, structure, and spares. There’s a consisted of hex device for fastening every one of the bolts into the frame, or, pop in a hex bit right into your power device– just beware not to over-tighten.

All of the parts have a high quality coating to them with rounded edges to prevent cut hands. Below is a shot of all the screws that are attached to the leg setting up– it’s not going anywhere!


The foot assembly additionally consists of height-adjustable turning equipments to maintain the front-to-back activity of the desk, which was really helpful for the carpeted office flooring. I’m also using a floor mat to shield the rug from chair wheel damage at resting height, as well as push the chair when I’m transitioning to standing elevation.


The luxurious controller was worth the investment. The switches are all variable stress programmed, indicating the backwards and forwards arrows will certainly change the height by 1/10th of an inch with a single press, or continually change the height by around 0.7 inches per 2nd if you hold the switch for 2 seconds. The memory switches are similar in design: press to recall the elevation setup, or hold the button down for five seconds to save a new elevation value. I’m using switch 1 for my resting setting and also switch 4 for my standing setting, which gives me 2 and 3 for anything I might require in the future.


Using my Standdesk

I have actually been making use of the brand-new desk for a couple of weeks and have written down my initial impacts:

The motors are quiet yet can be heard in the following space over. It takes possibly 25 seconds for the desk to totally shift from sitting to standing based on my presets.
I use an Ergotron side-by-side check arm (especially this LX version), triggering the desk to get a little rough when I change my weight versus the key-board. In knowledge, I should have purchased the bar upgrade for my desk after establishing the weight of my displays. If you plan to do a dual monitor configuration, get the crossbar.

Since gravity compresses the discs in a human spinal column, I need to increase the desk greater in the morning and also reduced it in the evening.

An anti-fatigue floor covering is absolutely important for long duration standing. I acquired an Octagonal mat from SmartCells, making use of rubber “cells” that are envisioned listed below.


Regardless of any type of issues I might have had with the phone or the cookie-cutter style, pretty much every one of those concerns washed away as soon as I in fact got down to using this point.

I didn’t think it was also possible, the StandDesk somehow takes care of to be even a lot more steady than the Jarvis, both at sitting and also standing heights. A lot of days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not necessarily because it’s that unsteady, however even if I want as much stability as I can get.

The StandDesk one ups the gambit also additionally, showing to be just as consistent on its own at standing height as the Jarvis is with wall support. This is all without the firm’s crossbar enhancement, which they declare adds even more stability when purchased as a part of the package deal.When it comes to weight resistance, the StandDesk shares yet much more statistics with the Jarvis, being rated for approximately 350 pounds of weight capacity.

I’ve been utilizing the desk for regarding 3 weeks currently for everyday job (as well as following standing workdesk finest practices), whether it’s inputting out evaluations such as this one from our desktop computer or a laptop computer every so often. The desk stands up well versus non-coastered beverages, and the coating in addition to the desk still feels just as smooth and also glossy as the day I opened it despite days of perspiring wrists wresting on it and also several clean downs with a dustcloth.

Though I never ever intentionally attempt to damage any kind of workdesks too hard, throughout some lighter examinations (throwing a set of tricks onto it from a range, for example), it still stood up without a lot of visible indicators of damages.

When I gauged the noise result of the desk while it rose from a sitting placement to standing and also back again, it was by far the quietest we have actually checked. I might hardly get it to make more than about 9.5 dB of sound, so if your most significant issue is the whirr of your electric motor, this is certainly the one for you.

Customer support

Currently, generally I do not include much about the client service support of any kind of provided business, only since I really feel that in general if an item functions the method its expected to, I should not ever have a reason to call them to begin with. And while I desire I might claim that was the case throughout my experience with StandDesk, I simply can’t finish this review without discussing the numerous, apparently countless troubles I came across trying to obtain my desk assembled.

For starters, the desk I was sent out didn’t have any kind of memory mobile consisted of initially, which implied I had no chance of in fact regulating the up/down function on the desk itself. I contacted StandDesk regarding this concern, that returned to me around a day later with an apology and also an assurance that a brand-new one would certainly be shipped soon.

Standdesk review handset

The resource of all our issues …
Regarding 4 days later on a mobile phone arrived in the mail. The phone originally activated, yet it wasn’t long prior to I noticed that none of the programmable switches functioned, neither did the down button, however, for some reason the “memory” button dealt with the down function just great. I contacted the business once again, as well as they apologized for the mixup and said they would certainly have a new panel and also control box bent on me within the week.

Over two weeks later on my new panel as well as control box got here. As soon as I mounted them both the desk ultimately started working the means it was meant to, yet not after nearly a month of waiting and to and fro with a company that couldn’t remember to ship a core element of their item inside the very same box from the get-go.

Points to Take into consideration

In spite of its bankable attributes, this stand up workdesk likewise has its own downsides. Considering that no singular stand desk might catch all of the features that you may require, you may think about these in your decision-making.

Absence of a Crossbar as standard

Not having a maintaining bar is definitely not a deal-breaker, specifically considering a few of our other favorite workdesks such as the Totally Jarvis also do not have one. This workdesk does have one if you desire, but it is a paid add-on (much more on this later on also).

The bar is seen by some as a limitation, making it more challenging to put your legs easily below the desk. Others, on the other hand, discover that they offer added security, usually crucial when desks are totally expanded.

We have not review any kind of issues of the stability of this desk, so we don’t assume its something to actually be concerned about, although if you really desired a desk with a crossbar then we recommend you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a separate add-on bar that you can add to the desk on your own, just for an additional $49.95.


The stability of a standing desk is among the most crucial facets of these desks. Without a stable workdesk you’ll discover it tough to concentrate, which could cause you ending up being much less thinking about using the desk at standing height. To obtain the best return on your financial investment, you’ll intend to be happy when utilizing the desk.

Since the StandDesk Simple is the very first workdesk that I have checked with an optional cross support, I will certainly break down my security tests into 2 areas. Both examinations will certainly include the regular front to back rocking examination as well as a left to ideal wobble. The initial will certainly be without the cross assistance as well as the second will certainly be with it. Just to note, states that the addition of the cross support can enhance security by as much as 15%. I have no suggestion exactly how they thought of that number.

Without Cross Assistance

Left to Right: The wobble test was a various circumstance. StandDesk Simple was the 2nd desk that I examined that wobbled at the bottom with weight on the desktop. The first was the IKEA Bekant. By the time it got to 36″ the shaking movement was bad. Yet factor it would influence your job.

With Cross Support

Front to Back: Including the cross assistance does not affect the shaking activity. The StandDesk Simple started to experienced a shaking motion at 36″. By 41″ the shaking movement was bad.

Entrusted to Right: Adding the cross assistance to the StandDesk boosted the wobble motion for lower elevations. With the cross assistance the wobble movement really did not start till you got to 35″. By 39″ the wobble activity ended up being negative.

Keep in mind: It’s extremely essential with flexible standing desks to completely tighten up all hardware. If there is hardware that is not completely tight, the activity experienced when extended to standing elevation will certainly be overemphasized. This is particularly true with a workdesk frame that includes 32 bolts, there are much way too many factors at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we have actually evaluated in our labs, we need to narrow our referral on the StandDesk Pro to shorter customers with narrower desktop computers, as the stability just isn’t there for a huge mass elevated high off the ground. American-made workdesks will certainly be much better suited to these applications, as well as for a fairly apparent reason. Practically all American-made bases are made in US manufacturing facilities that are owned by Swedish, Danish or German companies that invented this market, and their average people are a lot taller than the ordinary Eastern consumer, so they began making longer-stroke training legs a long period of time back. And also they have far more robotic automation, laser-cutting equipment, as well as sheer experience making standing desk bases, obviously.

Yet if you’re not also high, do not have an extreme amount of heavy devices on your desktop, and don’t need too wide of a workdesk, the StandDesk Pro will certainly give you excellent value.

All that could change with Yu’s guaranteed StandDesk Pro 2.0 layout that he expects to launch at some time in the future. Originally we were told we would certainly see it by June 2018. Greater than a year later it has yet to emerge, and Yu states he’s had problem getting the product top quality he requires out of a number of Chinese factories he’s tried dealing with. The new style is supposedly mosting likely to be a lot easier to put together as well as have a heftier bar style, to name a few improvements. He says the new base will certainly be provided in both a “T-Leg” and “C-Leg” configuration, alleviating our issue regarding side-load stressing on the lifting columns.

If this brand-new base ever before involves market we’ll upgrade you here. We’re not holding our breath any type of longer as the most current information on the company is that Yu closed the tiny Los Angeles workplace as well as has moved it to join with all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with remarkable efficiency has actually been present via the brand-new joint endeavor in between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While limited in dimension and also color options, it has taken the mantle far from StandDesk’s long-ago standing as the most effective standing desk under $400.

error: Content is protected !!