Adjustable Desk Top Standing

The StandDesk was developed by millennials, is marketed straight at millennials, and also has been gobbled up by millennials in impressive quantities. While it lugs a ten-year warranty (the longest of any kind of Chinese-made base), in this case it’s not always a reputable sign of the anticipated helpful life of the lifting columns. For the cost, the StandDesk is a fantastic lower-cost choice to the UpLift, Jarvis as well as various other Chinese-made workdesks. Regardless of its security concerns this is a much better product than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, as well as a good value on the whole. It’s the mid-priced offering in the wide group of Chinese-made desks that is swaying customers from both its more affordable as well as pricier peers.

StandDesk Building, Configuration, and Gadgets

Developing the desk is pretty direct if you adhere to the in-depth guidelines. Every one of the screws, bolts, washers, as well as springtime washing machines come in different bags that are marked with their destination: table top, structure, as well as spares. There’s an included hex tool for fastening every one of the screws right into the frame, or, pop in a hex little bit into your power device– simply take care not to over-tighten.

Every one of the components have a high quality finish to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!


The foot assembly also includes height-adjustable rotation gears to support the front-to-back movement of the desk, which was really valuable for the carpeted office flooring. I’m also making use of a flooring mat to safeguard the rug from chair wheel damage at resting height, and also push the chair back when I’m transitioning to standing elevation.


The deluxe controller deserved the investment. The buttons are all variable pressure programmed, implying the up and down arrowheads will adjust the height by 1/10th of an inch with a solitary press, or continuously change the height by about 0.7 inches per 2nd if you hold the button for two secs. The memory switches are similar in layout: press to recall the height setup, or hold the button down for 5 secs to store a brand-new height value. I’m utilizing button 1 for my resting placement and switch 4 for my standing placement, which gives me 2 as well as 3 for anything I may require in the future.


Using my Standdesk

I’ve been utilizing the brand-new workdesk for a few weeks and also have actually documented my initial perceptions:

The motors are quiet however can be heard in the next room over. It takes perhaps 25 secs for the desk to fully shift from sitting to standing based on my presets.
I make use of an Ergotron side-by-side keep an eye on arm (specifically this LX model), creating the desk to get a little rough when I shift my weight versus the keyboard. In hindsight, I must have bought the crossbar upgrade for my desk after determining the weight of my displays. If you intend to do a twin monitor configuration, get the bar.

Since gravity presses the discs in a human back, I need to raise the desk greater in the morning and lower it at night.

An anti-fatigue mat is absolutely vital for long period of time standing. I acquired an Octagonal floor covering from SmartCells, using rubber “cells” that are visualized below.


Despite any kind of problems I might have had with the handset or the cookie-cutter style, basically all of those problems gotten rid of when I really got down to using this point.

Although I didn’t assume it was even feasible, the StandDesk in some way manages to be a lot more steady than the Jarvis, both at resting as well as standing heights. A lot of days I like to run my Jarvis at max height while pressed against my wall; not always since it’s that shaky, yet even if I desire as much security as I can get.

The StandDesk one ups the gambit even further, verifying to be equally as consistent by itself at standing height as the Jarvis is with wall support. This is all without the firm’s crossbar addition, which they claim includes even more stability when bought as a part of the plan deal.When it concerns weight tolerance, the StandDesk shares yet even more statistics with the Jarvis, being ranked for as much as 350 pounds of weight capability.

I have actually been utilizing the desk for regarding three weeks now for daily work (and also following standing desk best techniques), whether it’s typing out evaluations similar to this one from our desktop computer or a laptop from time to time. The desk holds up well against non-coastered beverages, as well as the finish on top of the desk still feels equally as smooth as well as glossy as the day I opened it despite days of sweaty wrists wresting on it and also multiple wipe downs with a rag.

Though I never intentionally try to damage any kind of workdesks also hard, throughout some lighter examinations (throwing a collection of tricks onto it from a range, as an example), it still held up without too many noticeable indicators of damages.

Finally, when I determined the noise output of the desk while it rose from a sitting setting to standing and also back again, it was without a doubt the quietest we’ve tested yet. I can barely get it to make more than regarding 9.5 dB of sound, so if your largest concern is the whirr of your electric motor, this is certainly the one for you.

Customer care

Currently, generally I don’t include much regarding the client service support of any kind of provided company, just since I really feel that as a whole if an item works the means its supposed to, I should not ever have a factor to call them to begin with. As well as while I want I might state that held true throughout my experience with StandDesk, I just can’t complete this review without mentioning the many, apparently endless troubles I ran into trying to obtain my desk assembled.

For beginners, the desk I was sent really did not have any type of memory handset included initially, which suggested I had no other way of actually regulating the up/down feature on the desk itself. I contacted StandDesk regarding this issue, who returned to me around a day later with an apology and a guarantee that a brand-new one would be shipped out quickly.

Standdesk review handset

The resource of all our problems …
About four days later on a mobile showed up in the mail. The mobile phone at first switched on, but it wasn’t long prior to I observed that none of the programmable switches functioned, neither did the down switch, however, for some factor the “memory” switch handled the down feature simply fine. I called the company once again, and they excused the mixup and also stated they would certainly have a new panel and also control box out to me within the week.

Over 2 weeks later on my new panel and also control box got here. As soon as I mounted them both the desk lastly began functioning the way it was meant to, however not after nearly a month of waiting and also back and forth with a firm that could not bear in mind to ship a core part of their product inside the very same box from the beginning.

Points to Take into consideration

Regardless of its bankable functions, this stand up desk likewise has its own drawbacks. Considering that no particular stand desk can record every one of the features that you may require, you might think about these in your decision-making.

Lack of a Bar as requirement

Not having a maintaining bar is certainly not a deal-breaker, specifically considering several of our various other favorite workdesks such as the Totally Jarvis additionally do not have one. This workdesk does have one if you want, however it is a paid add-on (more on this later too).

The bar is seen by some as an obstacle, making it tougher to place your legs easily listed below the desk. Others, on the other hand, find that they offer added stability, commonly essential when workdesks are totally expanded.

We have not review any type of issues of the stability of this desk, so we don’t believe its something to really be concerned about, although if you truly wanted a desk with a bar after that we suggest you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a separate add-on crossbar that you can add to the workdesk yourself, just for an added $49.95.


The security of a standing workdesk is among one of the most crucial aspects of these desks. Without a steady workdesk you’ll find it difficult to focus, which might bring about you becoming less interested in making use of the desk at standing elevation. To get the best return on your financial investment, you’ll wish to enjoy when using the desk.

Because the StandDesk Simple is the initial desk that I have actually tested with an optional cross assistance, I will break down my stability tests right into two sections. Both tests will certainly consist of the typical front to back shaking test and also an entrusted to right wobble. The first will be without the cross support and the secondly will be with it. Just to note, claims that the addition of the cross support can raise security by up to 15%. I have no idea just how they developed that number.

Without Cross Support

Left to Right: The wobble test was a different circumstance. StandDesk Simple was the 2nd desk that I tested that wobbled near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it got to 36″ the shaking activity misbehaved. Beyond this factor it would certainly affect your work.

With Cross Assistance

Front to Back: Including the cross assistance does not influence the shaking motion. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking movement misbehaved.

Delegated Right: Including the cross support to the StandDesk enhanced the wobble activity for lower heights. With the cross support the wobble motion really did not start up until you reached 35″. By 39″ the wobble activity ended up being poor.

Keep in mind: It’s extremely crucial with flexible standing desks to totally tighten all equipment. If there is hardware that is not entirely tight, the movement experienced when extended to standing height will be exaggerated. This is especially true with a workdesk framework that includes 32 bolts, there are much way too many points at which the desk has an opportunity to relocate.

Final thought

Like all the Chinese bases we’ve examined in our laboratories, we have to tighten our suggestion on the StandDesk Pro to much shorter customers with narrower desktop computers, as the security simply isn’t there for a large mass elevated high off the ground. American-made desks will certainly be much better fit to these applications, and for a fairly noticeable reason. Practically all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German business that created this sector, as well as their typical residents are a whole lot taller than the ordinary Oriental consumer, so they began making longer-stroke lifting legs a very long time earlier. And also they have even more robotic automation, laser-cutting equipment, as well as large experience making standing desk bases, obviously.

Yet if you’re not too high, don’t have an extreme quantity of hefty tools on your desktop, as well as do not require too wide of a desk, the StandDesk Pro will offer you great value.

All that could transform with Yu’s assured StandDesk Pro 2.0 layout that he expects to launch at some point in the future. Originally we were told we would certainly see it by June 2018. Greater than a year later it has yet to materialize, and also Yu states he’s had problem obtaining the product high quality he needs out of a number of Chinese factories he’s tried working with. The new style is supposedly mosting likely to be much easier to put together and also have a heftier bar layout, to name a few refinements. He states the brand-new base will be provided in both a “T-Leg” and also “C-Leg” configuration, reducing our concern regarding side-load worrying on the lifting columns.

If this brand-new base ever before pertains to market we’ll update you below. We’re not holding our breath any type of longer as the most recent information on the company is that Yu shut the tiny Los Angeles office and also has actually relocated it to join with all its other workers in southeast Asia.

In the meantime, a new $399 standing desk with outstanding efficiency has actually been present via the new joint venture in between US-based iMovR and China-based Eureka, the i1 electric standing desk. While limited in size and also color choices, it has actually taken the mantle away from StandDesk’s long-ago status as the best standing desk under $400.

error: Content is protected !!