Adjustable Desktop

The StandDesk was developed by millennials, is marketed directly at millennials, as well as has been demolished by millennials in outstanding quantities. While it lugs a ten-year warranty (the lengthiest of any type of Chinese-made base), in this case it’s not necessarily a reliable indication of the expected helpful life of the training columns. For the rate, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis and other Chinese-made workdesks. Regardless of its stability problems this is a much better product than the Autonomous SmartDesk or IKEA Bekant could ever before intend to be, and a good value generally. It’s the mid-priced offering in the wide category of Chinese-made desks that is winning over consumers from both its less expensive and pricier peers.

StandDesk Building And Construction, Setup, as well as Gizmos

Building the desk is rather easy if you follow the comprehensive guidelines. All of the screws, screws, washing machines, as well as springtime washing machines can be found in different bags that are marked with their location: table top, structure, as well as spares. There’s an included hex tool for fastening all of the bolts right into the structure, or, appear a hex little bit right into your power device– just take care not to over-tighten.

All of the parts have an excellent quality finish to them with rounded edges to prevent cut hands. Below is a shot of all the screws that are fastened to the leg setting up– it’s not going anywhere!


The foot setting up also consists of height-adjustable turning gears to support the front-to-back motion of the desk, which was really useful for the carpeted office floor. I’m additionally utilizing a floor mat to shield the rug from chair wheel damage at sitting elevation, and push the chair when I’m transitioning to standing elevation.


The luxurious controller deserved the financial investment. The buttons are all variable stress configured, implying the up and down arrowheads will certainly readjust the height by 1/10th of an inch with a solitary press, or continuously adjust the elevation by about 0.7 inches per 2nd if you hold the button for two secs. The memory buttons are comparable in style: push to remember the height setup, or hold the button down for 5 secs to save a new elevation worth. I’m using switch 1 for my sitting position and button 4 for my standing setting, which gives me 2 and also 3 for anything I might need in the future.


Utilizing my Standdesk

I’ve been making use of the new desk for a few weeks as well as have actually listed my initial impacts:

The electric motors are quiet yet can be listened to in the next area over. It takes maybe 25 secs for the desk to totally change from sitting to standing based on my presets.
I utilize an Ergotron side-by-side monitor arm (specifically this LX model), triggering the desk to obtain a little rough when I change my weight versus the keyboard. In hindsight, I need to have purchased the crossbar upgrade for my workdesk after establishing the weight of my displays. If you intend to do a twin display setup, obtain the bar.

Because gravity presses the discs in a human spine, I need to elevate the desk higher in the morning and also lower it in the evening.

An anti-fatigue floor covering is definitely essential for long duration standing. I acquired an Octagonal mat from SmartCells, utilizing rubber “cells” that are imagined below.


Regardless of any troubles I may have had with the mobile phone or the cookie-cutter layout, practically all of those issues gotten rid of as soon as I actually came down to using this thing.

Although I didn’t believe it was even feasible, the StandDesk in some way manages to be even more secure than the Jarvis, both at sitting as well as standing heights. The majority of days I like to run my Jarvis at max elevation while pushed versus my wall; not always due to the fact that it’s that shaky, however even if I want as much security as I can obtain.

The StandDesk one ups the gambit also further, confirming to be equally as constant by itself at standing elevation as the Jarvis is with wall support. This is all without the business’s crossbar enhancement, which they declare includes even more security when bought as a part of the plan deal.When it comes to weight tolerance, the StandDesk shares yet even more statistics with the Jarvis, being rated for approximately 350 lbs of weight ability.

I have actually been using the desk for about 3 weeks currently for day-to-day job (and also adhering to standing desk best techniques), whether it’s keying out testimonials like this one from our desktop or a laptop every now and then. The desk holds up well versus non-coastered beverages, as well as the surface in addition to the desk still really feels equally as smooth as well as slick as the day I opened it regardless of days of sweaty wrists wresting on it and also multiple clean downs with a dustcloth.

I never intentionally attempt to damage any kind of workdesks as well hard, during some lighter examinations (throwing a set of tricks onto it from a range, for instance), it still held up without also several noticeable indications of damages.

When I measured the noise result of the workdesk while it rose from a resting setting to standing and also back again, it was by far the quietest we’ve examined. I might barely get it to make more than concerning 9.5 dB of sound, so if your greatest concern is the whirr of your motor, this is most definitely the one for you.

Customer Service

Now, usually I don’t include much regarding the customer service assistance of any type of given company, just due to the fact that I really feel that as a whole if an item works the way its intended to, I should not ever before have a factor to call them to begin with. And also while I want I can claim that was the case throughout my experience with StandDesk, I just can not complete this testimonial without discussing the countless, apparently unlimited troubles I experienced trying to obtain my desk assembled.

For beginners, the desk I was sent didn’t have any kind of memory handset consisted of initially, which indicated I had no chance of in fact regulating the up/down function on the desk itself. I contacted StandDesk about this issue, that got back to me around a day later with an apology and also a promise that a brand-new one would certainly be shipped quickly.

Standdesk review handset

The resource of all our troubles …
Regarding 4 days later on a mobile showed up in the mail. The mobile at first activated, but it had not been long before I discovered that none of the programmable buttons worked, neither did the down switch, however, for some reason the “memory” switch took care of the down feature simply fine. I spoke to the company again, as well as they excused the mixup and stated they would certainly have a brand-new panel and control box out to me within the week.

Over 2 weeks later my new panel and also control box showed up. When I installed them both the desk ultimately started working the means it was meant to, yet not after almost a month of waiting and backward and forward with a company that could not bear in mind to deliver a core component of their product inside the same box from the beginning.

Things to Take into consideration

Regardless of its bankable features, this stand up workdesk additionally has its own disadvantages. Because no singular stand desk might catch every one of the attributes that you may require, you may take into consideration these in your decision-making.

Lack of a Crossbar as criterion

Not having a supporting bar is absolutely not a deal-breaker, especially taking into consideration a few of our various other favored desks such as the Totally Jarvis also don’t have one. In fact, this desk does have one if you want, however it is a paid add-on (extra on this later as well).

The bar is seen by some as a limitation, making it more difficult to position your legs comfortably listed below the desk. Others, on the other hand, discover that they offer included stability, typically important when desks are fully expanded.

We have not review any type of complaints of the stability of this workdesk, so we don’t believe its something to actually be concerned regarding, although if you truly desired a workdesk with a crossbar then we advise you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does offer a separate add-on crossbar that you can include to the desk yourself, just for an extra $49.95.


The stability of a standing workdesk is just one of the most vital facets of these workdesks. Without a stable desk you’ll find it hard to concentrate, which can bring about you ending up being less thinking about utilizing the desk at standing elevation. To obtain the most effective return on your financial investment, you’ll intend to be happy when using the desk.

Since the StandDesk Simple is the very first desk that I have actually tested with an optional cross assistance, I will break down my security examinations right into 2 areas. Both examinations will include the normal front to back rocking examination and also a delegated ideal wobble. The very first will be without the cross assistance as well as the secondly will be with it. Simply to keep in mind, claims that the addition of the cross assistance can enhance stability by as much as 15%. I have no idea just how they created that number.

Without Cross Support

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the second desk that I evaluated that tottered near the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the rocking activity was bad. Beyond this factor it would impact your work.

With Cross Assistance

Front to Back: Including the cross assistance does not influence the rocking activity. The StandDesk Simple started to experienced a shaking activity at 36″. By 41″ the shaking activity misbehaved.

Left to Right: Adding the cross support to the StandDesk enhanced the wobble activity for lower elevations. With the cross assistance the wobble movement didn’t start until you got to 35″. By 39″ the wobble movement came to be bad.

Keep in mind: It’s really important with adjustable standing desks to fully tighten up all equipment. If there is equipment that is not entirely tight, the motion experienced when extended to standing height will certainly be overemphasized. This is particularly true with a workdesk structure that includes 32 bolts, there are much way too many factors at which the desk has an opportunity to relocate.

Final thought

Like all the Chinese bases we have actually tested in our labs, we have to tighten our recommendation on the StandDesk Pro to shorter customers with narrower desktop computers, as the stability simply isn’t there for a huge mass elevated high off the ground. American-made desks will be better suited to these applications, and for a relatively apparent factor. Practically all American-made bases are made in US factories that are owned by Swedish, Danish or German firms that designed this industry, as well as their ordinary residents are a lot taller than the average Asian customer, so they began making longer-stroke training legs a long period of time back. And they have even more robot automation, laser-cutting devices, as well as large experience making standing workdesk bases, it goes without saying.

If you’re not as well tall, don’t have an extreme amount of heavy equipment on your desktop computer, and do not need as well large of a desk, the StandDesk Pro will certainly provide you excellent bang for your dollar.

All that might change with Yu’s guaranteed StandDesk Pro 2.0 style that he expects to release at some time in the future. Originally we were told we ‘d see it by June 2018. More than a year later it has yet to materialize, and Yu states he’s had problem obtaining the product quality he needs out of numerous Chinese factories he’s attempted working with. The brand-new design is apparently going to be much easier to construct and also have a heftier crossbar style, to name a few improvements. He states the brand-new base will certainly be offered in both a “T-Leg” and “C-Leg” arrangement, reducing our worry concerning side-load worrying on the training columns.

If this new base ever before involves market we’ll update you right here. We’re not holding our breath any type of longer as the most current news on the company is that Yu closed the small Los Angeles workplace and also has actually transferred it to join with all its various other staff members in southeast Asia.

In the meantime, a new $399 standing desk with impressive efficiency has been introduce via the new joint endeavor between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While limited in dimension as well as color alternatives, it has actually taken the mantle far from StandDesk’s long-ago condition as the most effective standing desk under $400.

error: Content is protected !!