Adjustable Elevated Desks

The StandDesk was created by millennials, is marketed straight at millennials, as well as has been gobbled up by millennials in remarkable quantities. While it brings a ten-year service warranty (the longest of any kind of Chinese-made base), in this instance it’s not always a trustworthy indication of the expected valuable life of the training columns. For the cost, the StandDesk is a fantastic lower-cost alternative to the UpLift, Jarvis and also other Chinese-made desks. In spite of its stability problems this is a much better item than the Autonomous SmartDesk or IKEA Bekant can ever before wish to be, and also a good value overall. It’s the mid-priced offering in the wide group of Chinese-made desks that is gaining customers from both its less expensive as well as costlier peers.

StandDesk Building, Setup, and Gadgets

Developing the desk is quite easy if you comply with the in-depth directions. All of the screws, screws, washers, as well as spring washers come in different bags that are marked with their destination: table top, frame, and spares. There’s an included hex tool for fastening every one of the bolts right into the structure, or, pop in a hex bit right into your power tool– simply take care not to over-tighten.

Every one of the components have an excellent quality surface to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are attached to the leg setting up– it’s not going anywhere!


The foot setting up likewise consists of height-adjustable rotation equipments to maintain the front-to-back activity of the desk, which was extremely handy for the carpeted office floor. I’m additionally utilizing a flooring mat to safeguard the rug from chair wheel damage at resting elevation, as well as push the chair when I’m transitioning to standing elevation.


The luxurious controller was worth the investment. The switches are all variable stress set, indicating the up and down arrows will certainly adjust the height by 1/10th of an inch with a solitary press, or constantly readjust the elevation by around 0.7 inches per 2nd if you hold the button for 2 seconds. The memory buttons are similar in layout: push to remember the height setting, or hold the button down for five secs to store a new elevation worth. I’m using button 1 for my sitting setting and switch 4 for my standing placement, which gives me 2 and also 3 for anything I could need in the future.


Using my Standdesk

I have actually been using the new workdesk for a few weeks as well as have actually listed my preliminary impressions:

The electric motors are quiet however can be listened to in the following area over. It takes perhaps 25 seconds for the desk to totally change from sitting to standing based upon my presets.
I use an Ergotron side-by-side keep track of arm (especially this LX version), triggering the desk to get a little rocky when I change my weight versus the keyboard. In knowledge, I must have acquired the crossbar upgrade for my workdesk after figuring out the weight of my screens. If you plan to do a double display arrangement, get the bar.

Due to the fact that gravity compresses the discs in a human back, I require to elevate the desk greater in the early morning as well as reduced it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are pictured listed below.


Despite any kind of issues I might have had with the phone or the cookie-cutter style, basically every one of those concerns gotten rid of once I in fact came down to using this point.

Although I didn’t believe it was even possible, the StandDesk somehow manages to be even more stable than the Jarvis, both at resting and also standing heights. Most days I such as to run my Jarvis at max elevation while pushed against my wall surface; not always since it’s that shaky, yet just because I desire as much stability as I can obtain.

The StandDesk one ups the gambit even better, proving to be just as consistent on its own at standing height as the Jarvis is with wall support. This is all without the firm’s crossbar enhancement, which they declare includes a lot more security when acquired as a part of the plan deal.When it concerns weight resistance, the StandDesk shares yet much more statistics with the Jarvis, being ranked for approximately 350 pounds of weight ability.

I have actually been utilizing the desk for about three weeks now for everyday job (and also adhering to standing desk best practices), whether it’s keying out evaluations like this one from our desktop or a laptop every now and then. The desk stands up well versus non-coastered drinks, and the surface in addition to the desk still feels just as smooth and glossy as the day I opened it despite days of sweaty wrists wresting on it and numerous wipe downs with a dustcloth.

Though I never deliberately attempt to damage any type of workdesks also hard, during some lighter tests (throwing a collection of secrets onto it from a distance, as an example), it still held up without way too many noticeable signs of damage.

When I determined the sound result of the desk while it increased from a resting placement to standing as well as back again, it was by far the quietest we’ve evaluated. I might hardly get it to make more than concerning 9.5 dB of noise, so if your greatest problem is the whirr of your motor, this is absolutely the one for you.

Client service

Currently, usually I don’t include much regarding the customer support assistance of any offered firm, just due to the fact that I feel that in general if an item functions the way its supposed to, I shouldn’t ever have a factor to call them to begin with. And also while I want I could state that was the case during my experience with StandDesk, I merely can’t complete this testimonial without pointing out the countless, apparently countless problems I came across trying to get my desk created.

For starters, the desk I was sent out didn’t have any memory mobile consisted of originally, which suggested I had no way of actually regulating the up/down feature on the desk itself. I called StandDesk regarding this problem, who got back to me around a day later with an apology and also a pledge that a brand-new one would certainly be shipped quickly.

Standdesk evaluation handset

The source of all our troubles …
Regarding 4 days later a phone arrived in the mail. The mobile phone initially switched on, but it wasn’t long before I noticed that none of the programmable switches worked, neither did the down button, but also for some factor the “memory” button handled the down feature just great. I spoke to the firm once more, and also they apologized for the mixup as well as claimed they would certainly have a new panel and control box bent on me within the week.

Over two weeks later my new panel and control box showed up. As soon as I installed them both the desk finally started functioning the way it was meant to, yet not after virtually a month of waiting and back and forth with a company that could not bear in mind to deliver a core component of their product inside the very same box from the start.

Points to Take into consideration

In spite of its bankable features, this stand workdesk also has its own disadvantages. Given that no singular stand workdesk could record all of the features that you might require, you might take into consideration these in your decision-making.

Absence of a Crossbar as criterion

Not having a stabilizing crossbar is absolutely not a deal-breaker, particularly thinking about several of our other favorite workdesks such as the Completely Jarvis likewise don’t have one. This workdesk does have one if you want, yet it is a paid add-on (more on this later on too).

The crossbar is seen by some as a limitation, making it tougher to put your legs conveniently below the desk. Others, on the other hand, locate that they give included security, commonly crucial when desks are totally prolonged.

We have not check out any type of issues of the stability of this desk, so we don’t assume its something to truly be worried concerning, although if you actually wanted a desk with a crossbar then we advise you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does offer a different add-on crossbar that you can include to the desk yourself, simply for an additional $49.95.


The security of a standing desk is among one of the most crucial facets of these desks. Without a secure desk you’ll discover it hard to concentrate, which might result in you becoming less interested in making use of the desk at standing elevation. To get the most effective return on your investment, you’ll wish to be happy when utilizing the desk.

Due To The Fact That the StandDesk Simple is the first workdesk that I have actually evaluated with an optional cross assistance, I will break down my stability examinations into 2 sections. Both examinations will include the regular front to back rocking examination and also an entrusted to appropriate wobble. The very first will lack the cross support and the second will certainly be with it. Simply to note, says that the enhancement of the cross support can increase security by up to 15%. I have no idea just how they developed that number.

Without Cross Assistance

Left to Right: The wobble examination was a various situation. StandDesk Simple was the 2nd desk that I examined that tottered at the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the shaking motion was bad. Yet point it would certainly influence your job.

With Cross Assistance

Front to Back: Adding the cross assistance does not influence the shaking motion. The StandDesk Simple started to experienced a shaking motion at 36″. By 41″ the rocking motion was bad.

Delegated Right: Including the cross assistance to the StandDesk enhanced the wobble activity for lower elevations. With the cross assistance the wobble activity didn’t begin up until you got to 35″. By 39″ the wobble motion ended up being negative.

Keep in mind: It’s extremely essential with flexible standing workdesks to fully tighten up all equipment. If there is hardware that is not completely tight, the activity experienced when reached standing elevation will be overemphasized. This is specifically real with a desk structure that consists of 32 bolts, there are far too many factors at which the desk has a possibility to relocate.


Like all the Chinese bases we have actually evaluated in our laboratories, we need to narrow our recommendation on the StandDesk Pro to shorter users with narrower desktops, as the stability simply isn’t there for a huge mass elevated high off the ground. American-made desks will be much better matched to these applications, as well as for a rather noticeable factor. Practically all American-made bases are made in US factories that are had by Swedish, Danish or German firms that created this sector, and also their average residents are a lot taller than the typical Eastern customer, so they started making longer-stroke lifting legs a very long time back. And they have much more robot automation, laser-cutting devices, and large experience making standing workdesk bases, needless to say.

Yet if you’re not also high, don’t have an extreme quantity of hefty devices on your desktop computer, and also do not require too wide of a workdesk, the StandDesk Pro will certainly provide you great bang for your buck.

All that could alter with Yu’s guaranteed StandDesk Pro 2.0 layout that he expects to release at some time in the future. Originally we were informed we would certainly see it by June 2018. More than a year later on it has yet to emerge, and Yu states he’s had difficulty obtaining the product quality he needs out of numerous Chinese manufacturing facilities he’s tried working with. The new design is allegedly going to be much easier to set up and have a heftier bar design, among other improvements. He claims the new base will be supplied in both a “T-Leg” and also “C-Leg” arrangement, alleviating our issue concerning side-load stressing on the training columns.

If this new base ever pertains to market we’ll update you right here. We’re not holding our breath any longer as the most current news on the firm is that Yu shut the tiny Los Angeles workplace and also has actually transferred it to join with all its other employees in southeast Asia.

In the meantime, a brand-new $399 standing desk with excellent performance has been introduce via the brand-new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension and shade choices, it has actually taken the mantle away from StandDesk’s long-ago status as the most effective standing workdesk under $400.

error: Content is protected !!