Adjustable Height Cubicle Desk

The StandDesk was developed by millennials, is marketed straight at millennials, and also has been demolished by millennials in impressive volumes. While it carries a ten-year warranty (the lengthiest of any type of Chinese-made base), in this case it’s not necessarily a reputable indication of the anticipated useful life of the training columns. However, for the cost, the StandDesk is a terrific lower-cost option to the UpLift, Jarvis and also other Chinese-made desks. In spite of its stability concerns this is a far much better item than the Autonomous SmartDesk or IKEA Bekant could ever before intend to be, as well as a good value overall. It’s the mid-priced offering in the wide group of Chinese-made workdesks that is swaying consumers from both its less expensive as well as more expensive peers.

StandDesk Building And Construction, Setup, as well as Gizmos

Developing the desk is pretty simple if you follow the detailed guidelines. All of the screws, bolts, washers, and springtime washers can be found in separate bags that are noted with their destination: tabletop, structure, and also spares. There’s a consisted of hex tool for attaching every one of the screws into the structure, or, pop in a hex bit into your power tool– simply be careful not to over-tighten.

Every one of the parts have an excellent quality coating to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are attached to the leg assembly– it’s not going anywhere!


The foot assembly additionally consists of height-adjustable rotation gears to maintain the front-to-back activity of the desk, which was really handy for the carpeted office floor. I’m also making use of a floor mat to safeguard the rug from chair wheel damages at sitting height, as well as push the chair back when I’m transitioning to standing elevation.


The luxurious controller deserved the investment. The buttons are all variable stress set, indicating the up and down arrowheads will certainly readjust the elevation by 1/10th of an inch with a single press, or constantly readjust the elevation by around 0.7 inches per second if you hold the switch for 2 secs. The memory switches are comparable in layout: push to recall the height setup, or hold the button down for five secs to keep a brand-new elevation value. I’m utilizing switch 1 for my resting placement and button 4 for my standing position, which gives me 2 as well as 3 for anything I could require in the future.


Using my Standdesk

I have actually been utilizing the brand-new desk for a few weeks and also have listed my initial impacts:

The electric motors are quiet yet can be listened to in the following space over. It takes maybe 25 seconds for the desk to totally change from sitting to standing based upon my presets.
I utilize an Ergotron side-by-side monitor arm (particularly this LX design), causing the desk to get a little rocky when I move my weight against the keyboard. In knowledge, I ought to have bought the bar upgrade for my workdesk after figuring out the weight of my displays. If you plan to do a dual monitor setup, obtain the bar.

Because gravity presses the discs in a human spinal column, I need to increase the desk greater in the early morning and lower it at night.

An anti-fatigue mat is absolutely necessary for long period of time standing. I purchased an Octagonal floor covering from SmartCells, using rubber “cells” that are pictured listed below.


Regardless of any kind of issues I may have had with the handset or the cookie-cutter style, practically every one of those concerns gotten rid of when I actually came down to using this thing.

Although I didn’t assume it was even feasible, the StandDesk somehow takes care of to be a lot more steady than the Jarvis, both at resting and standing heights. The majority of days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not necessarily because it’s that shaky, however even if I desire as much security as I can get.

The StandDesk one ups the gambit also better, showing to be equally as constant on its own at standing height as the Jarvis is with wall support. This is all without the company’s crossbar enhancement, which they claim includes much more stability when acquired as a part of the package deal.When it involves weight tolerance, the StandDesk shares yet much more stats with the Jarvis, being rated for as much as 350 lbs of weight ability.

I’ve been utilizing the desk for regarding three weeks now for daily job (and following standing workdesk ideal practices), whether it’s inputting out evaluations similar to this one from our desktop computer or a laptop once in a while. The desk holds up well against non-coastered beverages, and also the finish on top of the desk still feels equally as smooth as well as slick as the day I opened it in spite of days of sweaty wrists wresting on it and several clean downs with a dustcloth.

Though I never deliberately attempt to damage any workdesks as well hard, throughout some lighter examinations (tossing a collection of secrets onto it from a distance, as an example), it still stood up without way too many noticeable indications of damages.

Lastly, when I gauged the sound output of the desk while it rose from a sitting position to standing and also back once more, it was without a doubt the quietest we’ve evaluated yet. I might barely get it to make more than about 9.5 dB of sound, so if your greatest issue is the whirr of your electric motor, this is definitely the one for you.

Customer care

Now, generally I do not include much concerning the client service assistance of any type of given firm, only since I feel that as a whole if a product works the means its expected to, I shouldn’t ever have a factor to call them in the first place. And while I want I might claim that was the case during my experience with StandDesk, I just can’t finish this testimonial without pointing out the countless, seemingly limitless issues I experienced trying to get my workdesk put together.

For beginners, the desk I was sent didn’t have any type of memory handset included initially, which suggested I had no other way of actually managing the up/down function on the desk itself. I spoke to StandDesk concerning this issue, that returned to me around a day later on with an apology and also a promise that a new one would certainly be shipped shortly.

Standdesk evaluation handset

The source of all our issues …
Concerning four days later a mobile got here in the mail. The handset originally activated, however it had not been long prior to I observed that none of the programmable buttons functioned, nor did the down button, however, for some reason the “memory” button dealt with the down feature just fine. I contacted the business once more, and also they excused the mixup and also stated they would have a brand-new panel and also control box bent on me within the week.

Over 2 weeks later on my new panel and also control box arrived. Once I installed them both the desk ultimately began functioning the means it was meant to, yet not after nearly a month of waiting as well as to and fro with a business that couldn’t bear in mind to ship a core element of their item inside the same box from the get-go.

Points to Consider

Regardless of its bankable functions, this stand workdesk also has its own drawbacks. Considering that no single stand desk might capture every one of the attributes that you may require, you may consider these in your decision-making.

Lack of a Bar as requirement

Not having a maintaining crossbar is definitely not a deal-breaker, specifically thinking about several of our various other favored workdesks such as the Completely Jarvis also don’t have one. Actually, this workdesk does have one if you desire, but it is a paid add-on (extra on this later too).

The bar is seen by some as a limitation, making it more challenging to put your legs conveniently below the desk. Others, on the other hand, find that they provide included security, typically critical when workdesks are completely prolonged.

We have not read any grievances of the security of this workdesk, so we don’t think its something to truly be concerned concerning, although if you really desired a desk with a crossbar then we recommend you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does use a different add-on crossbar that you can add to the desk on your own, just for an added $49.95.


The security of a standing desk is among the most important facets of these workdesks. Without a steady desk you’ll locate it difficult to concentrate, which can lead to you coming to be much less curious about making use of the desk at standing height. To get the best return on your investment, you’ll wish to enjoy when using the desk.

Since the StandDesk Simple is the first workdesk that I have tested with an optional cross assistance, I will break down my stability examinations into 2 sections. Both tests will consist of the typical front to back shaking examination as well as a delegated right wobble. The first will certainly lack the cross assistance and the second will be with it. Simply to note, states that the addition of the cross support can boost stability by up to 15%. I have no suggestion how they created that number.

Without Cross Support

Left to Right: The wobble examination was a different scenario. StandDesk Simple was the second workdesk that I tested that wobbled near the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it got to 36″ the shaking motion misbehaved. Beyond this point it would impact your job.

With Cross Assistance

Front to Back: Adding the cross support does not affect the rocking activity. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking motion misbehaved.

Left to Right: Including the cross support to the StandDesk boosted the wobble activity for reduced heights. With the cross assistance the wobble movement didn’t start until you reached 35″. By 39″ the wobble motion came to be negative.

Keep in mind: It’s very vital with adjustable standing desks to completely tighten up all equipment. If there is hardware that is not totally tight, the movement experienced when included standing elevation will be overemphasized. This is especially true with a workdesk frame that consists of 32 screws, there are far too many factors at which the desk has a chance to relocate.


Like all the Chinese bases we have actually checked in our laboratories, we need to tighten our referral on the StandDesk Pro to much shorter customers with narrower desktops, as the security simply isn’t there for a big mass boosted high off the ground. American-made desks will certainly be better suited to these applications, as well as for a fairly obvious reason. Practically all American-made bases are made in US manufacturing facilities that are had by Swedish, Danish or German business that invented this market, and their typical residents are a whole lot taller than the average Eastern consumer, so they began making longer-stroke lifting legs a long time earlier. As well as they have even more robotic automation, laser-cutting devices, as well as large experience making standing workdesk bases, it goes without saying.

If you’re not also tall, do not have an inordinate amount of hefty devices on your desktop, as well as don’t require too vast of a workdesk, the StandDesk Pro will certainly offer you good bang for your buck.

All that might transform with Yu’s promised StandDesk Pro 2.0 design that he expects to release at some point in the future. Initially we were told we ‘d see it by June 2018. More than a year later on it has yet to emerge, and also Yu states he’s had difficulty obtaining the item top quality he requires out of numerous Chinese factories he’s tried dealing with. The brand-new style is apparently going to be much easier to assemble and also have a heftier bar style, to name a few refinements. He says the new base will certainly be offered in both a “T-Leg” and also “C-Leg” configuration, easing our worry concerning side-load stressing on the lifting columns.

If this new base ever before pertains to market we’ll upgrade you below. However we’re not holding our breath any longer as one of the most recent news on the company is that Yu shut the little Los Angeles office and also has moved it to accompany all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with remarkable efficiency has actually been introduce via the brand-new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electric standing desk. While limited in size and also color alternatives, it has actually taken the mantle far from StandDesk’s long-ago condition as the very best standing workdesk under $400.

error: Content is protected !!