Adjustable Monitor Riser Standing Desk

The StandDesk was created by millennials, is marketed directly at millennials, and also has actually been demolished by millennials in excellent volumes. While it brings a ten-year service warranty (the longest of any kind of Chinese-made base), in this case it’s not always a trusted indicator of the expected beneficial life of the lifting columns. For the cost, the StandDesk is a wonderful lower-cost choice to the UpLift, Jarvis as well as various other Chinese-made desks. Despite its stability issues this is a much better product than the Autonomous SmartDesk or IKEA Bekant can ever want to be, and also a good value in general. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is winning over customers from both its more affordable as well as costlier peers.

StandDesk Building And Construction, Configuration, and also Gizmos

Building the desk is quite direct if you adhere to the thorough guidelines. Every one of the screws, bolts, washing machines, and also spring washers been available in separate bags that are noted with their location: table top, structure, and also spares. There’s a consisted of hex device for securing all of the screws right into the framework, or, appear a hex little bit into your power device– just be careful not to over-tighten.

All of the components have a top quality surface to them with rounded corners to prevent cut hands. Below is a shot of all the bolts that are secured to the leg assembly– it’s not going anywhere!


The foot setting up also consists of height-adjustable turning gears to support the front-to-back activity of the desk, which was very helpful for the carpeted office floor. I’m likewise using a floor mat to secure the carpeting from chair wheel damage at sitting elevation, and press the chair when I’m transitioning to standing elevation.


The deluxe controller deserved the investment. The switches are all variable stress programmed, suggesting the up and down arrows will certainly adjust the height by 1/10th of an inch with a solitary press, or continuously readjust the elevation by about 0.7 inches per second if you hold the switch for 2 secs. The memory switches are comparable in style: push to recall the height setting, or hold the button down for 5 seconds to keep a brand-new height value. I’m using switch 1 for my sitting setting and switch 4 for my standing setting, which offers me 2 and 3 for anything I may need in the future.


Utilizing my Standdesk

I have actually been using the new workdesk for a couple of weeks and have jotted down my first perceptions:

The electric motors are quiet but can be heard in the next space over. It takes probably 25 seconds for the desk to totally shift from resting to standing based on my presets.
I use an Ergotron side-by-side keep track of arm (specifically this LX design), creating the desk to obtain a little rocky when I move my weight versus the key-board. In hindsight, I need to have acquired the crossbar upgrade for my desk after identifying the weight of my screens. If you prepare to do a double screen setup, obtain the crossbar.

Due to the fact that gravity presses the discs in a human spinal column, I require to raise the desk greater in the morning and also reduced it in the evening.

An anti-fatigue mat is definitely important for long duration standing. I bought an Octagonal mat from SmartCells, using rubber “cells” that are imagined listed below.


Despite any kind of issues I may have had with the phone or the cookie-cutter design, pretty much all of those issues washed away as soon as I really got down to utilizing this point.

Although I didn’t assume it was even feasible, the StandDesk in some way manages to be much more steady than the Jarvis, both at sitting and also standing elevations. A lot of days I like to run my Jarvis at max height while pushed against my wall; not always because it’s that shaky, however just because I want as much security as I can obtain.

The StandDesk one ups the gambit even additionally, proving to be just as stable by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s crossbar addition, which they declare includes a lot more stability when bought as a part of the bundle deal.When it concerns weight resistance, the StandDesk shares yet even more statistics with the Jarvis, being ranked for as much as 350 lbs of weight capacity.

I’ve been utilizing the desk for about three weeks now for daily job (and adhering to standing desk best methods), whether it’s keying out reviews similar to this one from our desktop or a laptop every now and then. The desk stands up well versus non-coastered drinks, and also the finish in addition to the desk still feels just as smooth as well as slick as the day I opened it regardless of days of perspiring wrists wresting on it and multiple wipe downs with a dustcloth.

Though I never deliberately try to damage any type of workdesks as well hard, during some lighter examinations (tossing a collection of tricks onto it from a distance, for example), it still held up without way too many visible indications of damages.

When I measured the sound result of the desk while it rose from a resting position to standing as well as back once more, it was by much the quietest we’ve evaluated. I could barely get it to make more than about 9.5 dB of noise, so if your biggest worry is the whirr of your motor, this is definitely the one for you.

Customer Service

Now, normally I do not include much regarding the client service assistance of any type of offered business, only since I feel that generally if a product works the means its supposed to, I should not ever before have a reason to call them in the first place. And also while I wish I could state that was the case during my experience with StandDesk, I simply can’t finish this evaluation without pointing out the various, apparently endless problems I came across attempting to obtain my workdesk created.

For starters, the desk I was sent really did not have any memory handset consisted of originally, which suggested I had no chance of really managing the up/down function on the desk itself. I got in touch with StandDesk regarding this issue, that got back to me around a day later with an apology and also an assurance that a new one would certainly be shipped shortly.

Standdesk review handset

The source of all our troubles …
Regarding 4 days later on a mobile arrived in the mail. The phone initially turned on, but it had not been long before I discovered that none of the programmable switches functioned, neither did the down switch, however, for some factor the “memory” switch took care of the down feature just great. I called the company once more, as well as they apologized for the mixup as well as said they would have a brand-new panel and also control box bent on me within the week.

Over two weeks later my brand-new panel and also control box showed up. When I installed them both the desk finally started functioning the method it was intended to, yet not after virtually a month of waiting and also backward and forward with a business that couldn’t keep in mind to ship a core part of their product inside the very same box from the beginning.

Points to Consider

Despite its bankable features, this stand workdesk likewise has its very own drawbacks. Because no singular stand desk could catch all of the functions that you might require, you might take into consideration these in your decision-making.

Lack of a Crossbar as requirement

Not having a maintaining crossbar is absolutely not a deal-breaker, especially considering several of our other favorite workdesks such as the Fully Jarvis additionally do not have one. This desk does have one if you want, yet it is a paid add-on (much more on this later on also).

The bar is seen by some as an obstacle, making it tougher to put your legs easily below the desk. Others, on the other hand, find that they supply included stability, typically crucial when workdesks are fully expanded.

We have not review any kind of problems of the security of this workdesk, so we don’t believe its something to really be concerned concerning, although if you really desired a workdesk with a crossbar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a separate add-on bar that you can include to the workdesk on your own, simply for an added $49.95.


The stability of a standing desk is one of the most vital facets of these desks. Without a steady workdesk you’ll find it tough to concentrate, which might cause you becoming less curious about using the desk at standing elevation. To obtain the most effective return on your investment, you’ll want to enjoy when using the desk.

Due To The Fact That the StandDesk Simple is the very first workdesk that I have actually checked with an optional cross assistance, I will certainly break down my stability tests into two areas. Both tests will consist of the typical front to back rocking examination and also an entrusted to ideal wobble. The first will be without the cross assistance and also the second will certainly be with it. Just to keep in mind, states that the enhancement of the cross support can enhance stability by as much as 15%. I have no idea just how they created that number.

Without Cross Support

Left to Right: The wobble test was a different circumstance. StandDesk Simple was the second workdesk that I checked that wobbled near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the shaking activity was bad. Beyond this factor it would influence your work.

With Cross Assistance

Front to Back: Adding the cross support does not affect the shaking movement. The StandDesk Simple started to experienced a rocking movement at 36″. By 41″ the shaking activity misbehaved.

Delegated Right: Including the cross assistance to the StandDesk improved the wobble motion for lower heights. With the cross support the wobble activity really did not start till you reached 35″. By 39″ the wobble activity became negative.

Note: It’s extremely crucial with flexible standing desks to fully tighten all hardware. If there is equipment that is not completely limited, the motion experienced when included standing height will certainly be exaggerated. This is especially true with a desk frame that includes 32 bolts, there are far a lot of points at which the desk has a chance to move.

Final thought

Like all the Chinese bases we have actually tested in our labs, we need to narrow our suggestion on the StandDesk Pro to much shorter individuals with narrower desktops, as the stability simply isn’t there for a huge mass elevated high off the ground. American-made desks will certainly be better fit to these applications, and also for a relatively obvious factor. Basically all American-made bases are made in US factories that are owned by Swedish, Danish or German companies that designed this sector, and their ordinary people are a whole lot taller than the ordinary Asian customer, so they began making longer-stroke training legs a long period of time earlier. And also they have much more robot automation, laser-cutting devices, as well as large experience making standing desk bases, it goes without saying.

If you’re not as well tall, don’t have an excessive quantity of hefty equipment on your desktop computer, and do not need too wide of a desk, the StandDesk Pro will offer you good bang for your buck.

All that might alter with Yu’s promised StandDesk Pro 2.0 layout that he anticipates to launch at some time in the future. Originally we were told we ‘d see it by June 2018. Greater than a year later on it has yet to emerge, and also Yu states he’s had problem getting the item top quality he requires out of several Chinese manufacturing facilities he’s tried working with. The new style is allegedly mosting likely to be a lot easier to put together and have a heftier bar design, among other refinements. He claims the new base will certainly be supplied in both a “T-Leg” and “C-Leg” setup, alleviating our issue concerning side-load emphasizing on the training columns.

If this brand-new base ever pertains to market we’ll update you right here. We’re not holding our breath any longer as the most current information on the company is that Yu shut the small Los Angeles workplace and also has actually transferred it to join with all its other employees in southeast Asia.

In the meantime, a new $399 standing workdesk with outstanding efficiency has been present through the new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension as well as color alternatives, it has taken the mantle away from StandDesk’s long-ago condition as the most effective standing desk under $400.

error: Content is protected !!