Adjustable Standing Table

The StandDesk was developed by millennials, is marketed straight at millennials, as well as has been demolished by millennials in excellent volumes. While it lugs a ten-year guarantee (the longest of any type of Chinese-made base), in this instance it’s not always a dependable indicator of the anticipated valuable life of the lifting columns. However, for the rate, the StandDesk is a wonderful lower-cost option to the UpLift, Jarvis and also other Chinese-made workdesks. Despite its stability issues this is a far much better product than the Autonomous SmartDesk or IKEA Bekant might ever before wish to be, and also a good value on the whole. It’s the mid-priced offering in the broad classification of Chinese-made desks that is gaining customers from both its less expensive and also costlier peers.

StandDesk Construction, Setup, and Gadgets

Building the desk is pretty direct if you comply with the in-depth directions. All of the screws, bolts, washers, as well as spring washers been available in different bags that are noted with their destination: table top, framework, and spares. There’s a consisted of hex tool for securing every one of the screws into the frame, or, pop in a hex little bit right into your power device– just be careful not to over-tighten.

All of the parts have a top quality surface to them with rounded edges to stay clear of cut hands. Below is a shot of all the screws that are attached to the leg assembly– it’s not going anywhere!


The foot assembly likewise includes height-adjustable rotation gears to stabilize the front-to-back activity of the desk, which was extremely handy for the carpeted office floor. I’m also making use of a floor mat to protect the carpet from chair wheel damage at sitting height, and also press the chair when I’m transitioning to standing height.


The luxurious controller was worth the financial investment. The switches are all variable stress configured, suggesting the up and down arrowheads will certainly readjust the elevation by 1/10th of an inch with a single press, or continually readjust the height by around 0.7 inches per 2nd if you hold the button for 2 secs. The memory buttons are similar in layout: push to recall the height setting, or hold the button down for five seconds to save a new height value. I’m utilizing button 1 for my resting setting and button 4 for my standing placement, which offers me 2 and 3 for anything I might require in the future.


Using my Standdesk

I’ve been making use of the brand-new desk for a few weeks and also have made a note of my preliminary impacts:

The electric motors are quiet however can be listened to in the following area over. It takes possibly 25 seconds for the desk to fully transition from resting to standing based on my presets.
I utilize an Ergotron side-by-side keep track of arm (particularly this LX design), triggering the desk to get a little rough when I shift my weight versus the keyboard. In hindsight, I should have purchased the bar upgrade for my desk after identifying the weight of my screens. If you prepare to do a double screen arrangement, obtain the crossbar.

Due to the fact that gravity compresses the discs in a human back, I require to elevate the desk higher in the morning and also reduced it at night.

An anti-fatigue floor covering is absolutely important for long period of time standing. I bought an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are pictured listed below.


In spite of any troubles I might have had with the handset or the cookie-cutter style, pretty much every one of those issues removed once I really came down to utilizing this thing.

I really did not think it was also feasible, the StandDesk in some way handles to be even much more stable than the Jarvis, both at resting and also standing heights. A lot of days I like to run my Jarvis at max elevation while pushed against my wall surface; not always since it’s that shaky, but just because I want as much security as I can get.

The StandDesk one ups the gambit also additionally, showing to be equally as stable on its own at standing height as the Jarvis is with wall support. This is all without the firm’s bar addition, which they declare includes much more stability when purchased as a part of the package deal.When it involves weight resistance, the StandDesk shares yet much more stats with the Jarvis, being rated for approximately 350 pounds of weight capability.

I have actually been making use of the desk for about 3 weeks now for day-to-day work (as well as adhering to standing workdesk ideal methods), whether it’s keying out reviews such as this one from our desktop computer or a laptop from time to time. The desk stands up well versus non-coastered drinks, and the coating in addition to the desk still feels equally as smooth as well as slick as the day I opened it in spite of days of perspiring wrists wresting on it and numerous clean downs with a cloth.

Though I never intentionally try to damage any kind of workdesks as well hard, during some lighter tests (throwing a collection of keys onto it from a range, as an example), it still held up without way too many noticeable indications of damage.

Finally, when I determined the noise output of the desk while it rose from a resting position to standing and also back once again, it was without a doubt the quietest we have actually checked yet. I might hardly get it to make more than about 9.5 dB of noise, so if your most significant worry is the whirr of your motor, this is absolutely the one for you.

Customer care

Currently, normally I don’t include much concerning the customer care support of any kind of offered firm, only because I really feel that in general if an item functions the means its intended to, I shouldn’t ever have a factor to call them to begin with. As well as while I want I could state that was the case during my experience with StandDesk, I just can’t finish this review without discussing the countless, seemingly endless issues I came across trying to obtain my desk assembled.

For beginners, the desk I was sent didn’t have any kind of memory handset consisted of originally, which meant I had no way of in fact controlling the up/down feature on the desk itself. I got in touch with StandDesk regarding this concern, that got back to me around a day later with an apology as well as a promise that a brand-new one would be shipped out soon.

Standdesk evaluation handset

The resource of all our issues …
Regarding 4 days later on a mobile phone got here in the mail. The handset at first turned on, yet it wasn’t long before I observed that none of the programmable buttons functioned, nor did the down switch, but also for some factor the “memory” button managed the down function just fine. I called the company once again, and also they apologized for the mixup and said they would have a new panel as well as control box bent on me within the week.

Over 2 weeks later my brand-new panel and control box showed up. Once I mounted them both the desk ultimately began working the way it was intended to, but not after practically a month of waiting as well as to and fro with a company that could not remember to ship a core component of their product inside the very same box from the outset.

Points to Take into consideration

Regardless of its bankable features, this stand desk likewise has its very own disadvantages. Because no particular stand desk can capture all of the functions that you may need, you may take into consideration these in your decision-making.

Absence of a Bar as standard

Not having a stabilizing bar is certainly not a deal-breaker, specifically considering some of our various other preferred desks such as the Totally Jarvis additionally don’t have one. This desk does have one if you want, however it is a paid add-on (much more on this later on also).

The crossbar is seen by some as a limitation, making it more difficult to place your legs comfortably listed below the desk. Others, on the other hand, discover that they provide added stability, frequently critical when workdesks are totally prolonged.

We have not review any kind of problems of the security of this desk, so we do not assume its something to truly be worried regarding, although if you actually desired a desk with a crossbar after that we recommend you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a separate add-on crossbar that you can include to the workdesk yourself, simply for an extra $49.95.


The stability of a standing workdesk is just one of one of the most vital aspects of these desks. Without a secure desk you’ll locate it tough to focus, which could lead to you becoming much less thinking about using the desk at standing height. To obtain the very best return on your investment, you’ll intend to more than happy when utilizing the desk.

Due To The Fact That the StandDesk Simple is the initial workdesk that I have actually evaluated with an optional cross support, I will break down my security tests right into two sections. Both tests will include the regular front to back shaking test as well as a left to ideal wobble. The very first will lack the cross support as well as the second will be with it. Just to note, claims that the enhancement of the cross assistance can increase stability by as much as 15%. I have no idea just how they thought of that number.

Without Cross Assistance

Left to Right: The wobble test was a different situation. StandDesk Simple was the second desk that I tested that tottered near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the shaking activity misbehaved. Beyond this point it would certainly affect your work.

With Cross Support

Front to Back: Adding the cross assistance does not affect the rocking motion. The StandDesk Simple began to experienced a shaking movement at 36″. By 41″ the shaking movement misbehaved.

Entrusted to Right: Adding the cross support to the StandDesk boosted the wobble activity for lower elevations. With the cross support the wobble movement didn’t begin till you got to 35″. By 39″ the wobble movement ended up being bad.

Keep in mind: It’s extremely important with adjustable standing desks to fully tighten all equipment. If there is equipment that is not completely limited, the movement experienced when included standing height will be exaggerated. This is especially true with a workdesk structure that consists of 32 screws, there are much way too many factors at which the desk has a chance to move.

Final thought

Like all the Chinese bases we have actually examined in our labs, we need to narrow our recommendation on the StandDesk Pro to shorter customers with narrower desktops, as the security just isn’t there for a large mass raised high off the ground. American-made workdesks will be better suited to these applications, and also for a rather noticeable reason. Virtually all American-made bases are made in US factories that are owned by Swedish, Danish or German firms that created this market, as well as their average residents are a whole lot taller than the average Asian customer, so they began making longer-stroke lifting legs a long period of time back. As well as they have even more robot automation, laser-cutting devices, and sheer experience making standing workdesk bases, obviously.

But if you’re not too high, do not have an inordinate amount of hefty tools on your desktop, as well as do not need too wide of a workdesk, the StandDesk Pro will certainly give you good value.

All that may change with Yu’s assured StandDesk Pro 2.0 design that he expects to release at some point in the future. Initially we were told we would certainly see it by June 2018. More than a year later on it has yet to emerge, and also Yu states he’s had difficulty obtaining the item quality he requires out of numerous Chinese manufacturing facilities he’s attempted working with. The new design is apparently going to be much easier to assemble as well as have a heftier bar design, to name a few improvements. He says the brand-new base will be offered in both a “T-Leg” and “C-Leg” setup, reducing our issue concerning side-load emphasizing on the lifting columns.

If this new base ever before comes to market we’ll upgrade you right here. But we’re not holding our breath any kind of longer as the most current information on the business is that Yu shut the small Los Angeles office and has moved it to join with all its other workers in southeast Asia.

In the meantime, a new $399 standing desk with excellent performance has been present through the brand-new joint venture between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While restricted in dimension and shade choices, it has taken the mantle away from StandDesk’s long-ago standing as the most effective standing workdesk under $400.

error: Content is protected !!