Adjustible Desk

The StandDesk was developed by millennials, is marketed right at millennials, and also has been demolished by millennials in excellent quantities. While it lugs a ten-year warranty (the lengthiest of any type of Chinese-made base), in this situation it’s not necessarily a reliable sign of the expected helpful life of the training columns. For the rate, the StandDesk is a fantastic lower-cost choice to the UpLift, Jarvis and also various other Chinese-made workdesks. In spite of its stability issues this is a far better item than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, and a good value in general. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is winning over consumers from both its more affordable and pricier peers.

StandDesk Construction, Setup, and also Devices

Developing the desk is pretty easy if you adhere to the thorough guidelines. Every one of the screws, screws, washers, and springtime washers been available in different bags that are marked with their destination: table top, structure, as well as spares. There’s a consisted of hex device for fastening every one of the bolts into the framework, or, pop in a hex bit right into your power device– simply be careful not to over-tighten.

All of the parts have a high quality finish to them with rounded corners to avoid cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot assembly additionally consists of height-adjustable turning equipments to maintain the front-to-back motion of the desk, which was extremely valuable for the carpeted office flooring. I’m also utilizing a floor mat to secure the rug from chair wheel damages at sitting elevation, and push the chair back when I’m transitioning to standing height.


The deluxe controller was worth the investment. The switches are all variable pressure set, implying the up and down arrows will certainly adjust the height by 1/10th of an inch with a single press, or constantly adjust the height by around 0.7 inches per 2nd if you hold the button for two secs. The memory switches are similar in style: push to recall the height setup, or hold the button down for five seconds to store a brand-new elevation value. I’m utilizing switch 1 for my sitting position and also switch 4 for my standing placement, which gives me 2 and also 3 for anything I may require in the future.


Using my Standdesk

I’ve been utilizing the new desk for a couple of weeks and also have written down my preliminary impressions:

The electric motors are quiet but can be heard in the next area over. It takes probably 25 seconds for the desk to completely transition from resting to standing based on my presets.
I utilize an Ergotron side-by-side keep an eye on arm (specifically this LX model), creating the desk to obtain a little rough when I change my weight against the key-board. In knowledge, I must have bought the bar upgrade for my desk after establishing the weight of my displays. If you prepare to do a dual monitor setup, get the crossbar.

Since gravity presses the discs in a human spinal column, I need to increase the desk higher in the morning and also lower it at night.

An anti-fatigue floor covering is definitely crucial for long period of time standing. I purchased an Octagonal floor covering from SmartCells, using rubber “cells” that are pictured below.


In spite of any kind of issues I may have had with the phone or the cookie-cutter design, pretty much all of those issues removed once I in fact came down to using this point.

I didn’t believe it was also possible, the StandDesk somehow takes care of to be also more steady than the Jarvis, both at sitting and standing heights. A lot of days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not always since it’s that wobbly, but just because I want as much security as I can obtain.

The StandDesk one ups the gambit also better, verifying to be equally as steady by itself at standing height as the Jarvis is with wall support. This is all without the business’s crossbar addition, which they assert adds a lot more stability when acquired as a part of the plan deal.When it pertains to weight tolerance, the StandDesk shares yet much more statistics with the Jarvis, being rated for up to 350 lbs of weight capability.

I have actually been utilizing the desk for about three weeks now for everyday job (and complying with standing workdesk best practices), whether it’s keying out testimonials like this one from our desktop computer or a laptop every so often. The desk holds up well against non-coastered drinks, as well as the surface on top of the desk still feels equally as smooth and also glossy as the day I opened it regardless of days of perspiring wrists wresting on it and also numerous wipe downs with a dustcloth.

Though I never ever intentionally attempt to damage any type of desks also hard, during some lighter tests (tossing a set of secrets onto it from a range, for instance), it still stood up without way too many visible indicators of damages.

When I measured the sound output of the desk while it increased from a resting position to standing as well as back once more, it was by far the quietest we’ve examined. I might barely get it to make greater than concerning 9.5 dB of noise, so if your biggest worry is the whirr of your electric motor, this is certainly the one for you.

Customer support

Now, normally I do not include much about the client service assistance of any kind of provided business, just due to the fact that I feel that generally if a product functions the way its supposed to, I should not ever have a factor to call them to begin with. And also while I desire I might claim that held true throughout my experience with StandDesk, I merely can not finish this testimonial without pointing out the many, seemingly endless issues I came across attempting to get my workdesk put together.

For beginners, the desk I was sent really did not have any type of memory handset included originally, which suggested I had no other way of really regulating the up/down function on the desk itself. I contacted StandDesk regarding this problem, who returned to me around a day later on with an apology and also a guarantee that a brand-new one would be shipped out soon.

Standdesk evaluation handset

The resource of all our issues …
About 4 days later on a mobile phone arrived in the mail. The mobile originally turned on, however it had not been long before I observed that none of the programmable switches functioned, nor did the down switch, however, for some reason the “memory” button dealt with the down feature just great. I spoke to the firm again, and also they excused the mixup and stated they would certainly have a new panel and control box bent on me within the week.

Over two weeks later on my new panel and also control box arrived. As soon as I mounted them both the desk finally started functioning the way it was supposed to, yet not after nearly a month of waiting and also backward and forward with a business that could not bear in mind to deliver a core part of their product inside the same box from the outset.

Points to Take into consideration

Despite its bankable attributes, this stand up desk likewise has its very own drawbacks. Because no singular stand desk could record all of the features that you might need, you may take into consideration these in your decision-making.

Lack of a Crossbar as standard

Not having a stabilizing crossbar is certainly not a deal-breaker, particularly considering some of our other favored desks such as the Fully Jarvis also don’t have one. Actually, this desk does have one if you want, however it is a paid add-on (a lot more on this later too).

The bar is seen by some as an obstacle, making it more difficult to put your legs easily listed below the desk. Others, on the other hand, find that they give included stability, often essential when desks are totally expanded.

We have not read any type of issues of the security of this workdesk, so we do not think its something to truly be worried concerning, although if you truly wanted a workdesk with a bar after that we recommend you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does offer a separate add-on crossbar that you can include to the desk on your own, just for an additional $49.95.


The stability of a standing workdesk is just one of the most vital facets of these desks. Without a stable desk you’ll locate it hard to focus, which can bring about you ending up being less thinking about utilizing the desk at standing elevation. To obtain the most effective return on your investment, you’ll wish to more than happy when making use of the desk.

Since the StandDesk Simple is the first workdesk that I have tested with an optional cross support, I will certainly break down my stability examinations right into 2 areas. Both examinations will include the normal front to back shaking test and a delegated ideal wobble. The very first will certainly be without the cross support as well as the secondly will certainly be with it. Just to note, says that the addition of the cross assistance can enhance security by as much as 15%. I have no concept how they came up with that number.

Without Cross Support

Left to Right: The wobble test was a different circumstance. StandDesk Simple was the second workdesk that I examined that tottered near the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the shaking motion was bad. Beyond this factor it would certainly influence your job.

With Cross Assistance

Front to Back: Including the cross assistance does not impact the rocking movement. The StandDesk Simple started to experienced a shaking activity at 36″. By 41″ the rocking activity was bad.

Delegated Right: Adding the cross support to the StandDesk boosted the wobble movement for reduced elevations. With the cross assistance the wobble motion didn’t start till you got to 35″. By 39″ the wobble movement came to be negative.

Keep in mind: It’s very crucial with adjustable standing workdesks to fully tighten up all hardware. If there is equipment that is not entirely limited, the activity experienced when reached standing elevation will certainly be overemphasized. This is specifically true with a desk structure that consists of 32 bolts, there are much way too many factors at which the desk has a possibility to relocate.


Like all the Chinese bases we’ve examined in our labs, we need to tighten our referral on the StandDesk Pro to much shorter individuals with narrower desktop computers, as the security simply isn’t there for a huge mass raised high off the ground. American-made workdesks will certainly be better fit to these applications, and for a fairly evident reason. Virtually all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German companies that developed this sector, and their average residents are a whole lot taller than the typical Asian consumer, so they began making longer-stroke lifting legs a long time back. And they have even more robot automation, laser-cutting devices, and large experience making standing workdesk bases, obviously.

However if you’re not too high, don’t have an inordinate quantity of hefty equipment on your desktop computer, and also do not require also wide of a desk, the StandDesk Pro will certainly provide you great value.

All that may change with Yu’s guaranteed StandDesk Pro 2.0 design that he expects to launch at some point in the future. Originally we were informed we ‘d see it by June 2018. More than a year later it has yet to appear, and also Yu states he’s had difficulty getting the product high quality he requires out of several Chinese factories he’s tried working with. The new design is supposedly mosting likely to be much easier to set up and have a heftier crossbar style, among other improvements. He states the new base will be provided in both a “T-Leg” and “C-Leg” setup, minimizing our worry regarding side-load stressing on the lifting columns.

If this brand-new base ever involves market we’ll update you right here. However we’re not holding our breath any type of longer as the most current information on the company is that Yu closed the tiny Los Angeles workplace and has moved it to accompany all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with outstanding efficiency has been present through the brand-new joint endeavor between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While restricted in dimension and color choices, it has actually taken the mantle far from StandDesk’s long-ago status as the most effective standing workdesk under $400.

error: Content is protected !!