Adjusting Desks

The StandDesk was developed by millennials, is marketed directly at millennials, and has actually been demolished by millennials in impressive volumes. While it brings a ten-year guarantee (the lengthiest of any Chinese-made base), in this case it’s not necessarily a dependable indicator of the expected valuable life of the training columns. But also for the rate, the StandDesk is a fantastic lower-cost option to the UpLift, Jarvis and various other Chinese-made workdesks. In spite of its security concerns this is a much much better item than the Autonomous SmartDesk or IKEA Bekant can ever want to be, as well as a good value generally. It’s the mid-priced offering in the wide group of Chinese-made workdesks that is swaying clients from both its more affordable and more expensive peers.

StandDesk Building And Construction, Arrangement, and also Devices

Building the desk is quite direct if you comply with the thorough instructions. Every one of the screws, screws, washers, and springtime washing machines come in separate bags that are noted with their location: table top, framework, as well as spares. There’s a consisted of hex device for attaching every one of the bolts right into the structure, or, pop in a hex little bit right into your power device– just be careful not to over-tighten.

All of the components have a high quality surface to them with rounded corners to prevent cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot setting up likewise consists of height-adjustable rotation equipments to support the front-to-back movement of the desk, which was really handy for the carpeted office floor. I’m also making use of a flooring mat to protect the carpeting from chair wheel damages at resting elevation, and also press the chair when I’m transitioning to standing elevation.


The deluxe controller was worth the financial investment. The switches are all variable stress set, indicating the up and down arrows will change the elevation by 1/10th of an inch with a single press, or constantly readjust the height by about 0.7 inches per 2nd if you hold the switch for 2 secs. The memory buttons are similar in layout: push to recall the height setup, or hold the button down for five secs to store a brand-new elevation worth. I’m using switch 1 for my sitting position and switch 4 for my standing placement, which offers me 2 and 3 for anything I may require in the future.


Utilizing my Standdesk

I’ve been utilizing the brand-new desk for a couple of weeks as well as have documented my initial impacts:

The electric motors are quiet but can be listened to in the next space over. It takes maybe 25 seconds for the desk to fully transition from sitting to standing based on my presets.
I make use of an Ergotron side-by-side check arm (especially this LX design), creating the desk to get a little rocky when I move my weight against the keyboard. In hindsight, I should have acquired the bar upgrade for my workdesk after figuring out the weight of my screens. If you plan to do a double screen configuration, obtain the bar.

Because gravity presses the discs in a human spinal column, I require to increase the desk higher in the morning as well as reduced it in the evening.

An anti-fatigue mat is definitely crucial for long period of time standing. I purchased an Octagonal floor covering from SmartCells, making use of rubber “cells” that are visualized listed below.


In spite of any kind of problems I might have had with the handset or the cookie-cutter design, basically all of those problems gotten rid of when I really got down to utilizing this point.

Although I didn’t think it was even feasible, the StandDesk in some way manages to be even more secure than the Jarvis, both at sitting as well as standing elevations. Many days I such as to run my Jarvis at max elevation while pressed versus my wall; not always because it’s that wobbly, yet even if I desire as much stability as I can obtain.

The StandDesk one ups the gambit also better, confirming to be equally as steady by itself at standing elevation as the Jarvis is with wall support. This is all without the company’s bar addition, which they assert adds much more security when acquired as a part of the bundle deal.When it involves weight tolerance, the StandDesk shares yet much more statistics with the Jarvis, being rated for up to 350 pounds of weight ability.

I’ve been making use of the desk for regarding three weeks now for day-to-day job (as well as following standing desk finest techniques), whether it’s inputting out evaluations like this one from our desktop or a laptop computer once in a while. The desk holds up well versus non-coastered beverages, and also the surface in addition to the desk still really feels just as smooth and glossy as the day I opened it regardless of days of sweaty wrists wresting on it and also multiple wipe downs with a dustcloth.

Though I never purposefully attempt to dent any workdesks also hard, throughout some lighter examinations (tossing a collection of keys onto it from a distance, as an example), it still stood up without a lot of visible signs of damages.

When I gauged the noise result of the desk while it increased from a sitting position to standing as well as back once more, it was by far the quietest we have actually checked. I might hardly get it to make more than concerning 9.5 dB of noise, so if your largest concern is the whirr of your motor, this is definitely the one for you.

Customer care

Now, typically I don’t consist of much about the customer service assistance of any type of given company, just because I really feel that generally if a product works the method its meant to, I shouldn’t ever before have a reason to call them to begin with. And while I wish I can state that was the case during my experience with StandDesk, I simply can’t complete this review without mentioning the various, relatively endless troubles I encountered trying to get my workdesk created.

For starters, the desk I was sent didn’t have any type of memory phone consisted of originally, which suggested I had no chance of really managing the up/down feature on the desk itself. I called StandDesk concerning this concern, who returned to me around a day later on with an apology and also a promise that a new one would certainly be shipped shortly.

Standdesk testimonial handset

The resource of all our issues …
About four days later on a mobile showed up in the mail. The mobile originally switched on, yet it had not been long prior to I discovered that none of the programmable switches worked, neither did the down switch, however, for some reason the “memory” button managed the down function simply great. I contacted the firm once again, and also they apologized for the mixup and also said they would have a brand-new panel and also control box bent on me within the week.

Over 2 weeks later my new panel and control box arrived. As soon as I mounted them both the desk lastly started functioning the method it was expected to, but not after nearly a month of waiting as well as back and forth with a firm that couldn’t keep in mind to ship a core component of their item inside the very same box from the beginning.

Points to Consider

In spite of its bankable attributes, this stand up workdesk also has its own drawbacks. Given that no single stand desk might capture every one of the features that you may need, you might take into consideration these in your decision-making.

Lack of a Bar as standard

Not having a supporting bar is definitely not a deal-breaker, especially considering some of our other favored workdesks such as the Totally Jarvis also do not have one. As a matter of fact, this workdesk does have one if you desire, however it is a paid add-on (a lot more on this later on too).

The crossbar is seen by some as a barrier, making it more challenging to place your legs conveniently listed below the desk. Others, on the other hand, find that they provide included stability, frequently vital when workdesks are fully extended.

We have not review any type of grievances of the security of this workdesk, so we do not believe its something to actually be concerned regarding, although if you actually desired a desk with a bar then we recommend you take a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does offer a different add-on bar that you can contribute to the desk yourself, just for an additional $49.95.


The security of a standing desk is just one of the most essential aspects of these desks. Without a secure desk you’ll locate it tough to focus, which could lead to you ending up being less interested in using the desk at standing height. To get the best return on your financial investment, you’ll intend to more than happy when using the desk.

Because the StandDesk Simple is the initial workdesk that I have actually checked with an optional cross assistance, I will certainly break down my security tests right into 2 sections. Both examinations will certainly include the common front to back rocking test and a delegated right wobble. The very first will lack the cross support and the secondly will certainly be with it. Just to keep in mind, states that the enhancement of the cross support can raise security by approximately 15%. I have no idea exactly how they generated that number.

Without Cross Support

Left to Right: The wobble examination was a different circumstance. StandDesk Simple was the 2nd desk that I evaluated that wobbled at the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it got to 36″ the rocking movement was bad. Yet factor it would certainly impact your job.

With Cross Support

Front to Back: Adding the cross support does not influence the rocking activity. The StandDesk Simple started to experienced a rocking motion at 36″. By 41″ the shaking movement misbehaved.

Delegated Right: Adding the cross assistance to the StandDesk improved the wobble activity for reduced heights. With the cross assistance the wobble motion really did not begin until you reached 35″. By 39″ the wobble motion ended up being poor.

Note: It’s very essential with adjustable standing workdesks to fully tighten up all hardware. If there is equipment that is not entirely tight, the movement experienced when encompassed standing elevation will certainly be exaggerated. This is especially true with a workdesk frame that consists of 32 bolts, there are far way too many factors at which the desk has an opportunity to relocate.


Like all the Chinese bases we’ve tested in our labs, we have to tighten our referral on the StandDesk Pro to shorter users with narrower desktop computers, as the security simply isn’t there for a large mass boosted high off the ground. American-made desks will certainly be much better suited to these applications, as well as for a relatively apparent factor. Essentially all American-made bases are made in United States factories that are had by Swedish, Danish or German firms that invented this industry, as well as their average residents are a lot taller than the ordinary Eastern customer, so they began making longer-stroke training legs a very long time ago. And they have much more robotic automation, laser-cutting equipment, and large experience making standing desk bases, obviously.

But if you’re not as well tall, don’t have an extreme quantity of hefty devices on your desktop computer, as well as don’t require too wide of a workdesk, the StandDesk Pro will certainly give you great bang for your buck.

All that may transform with Yu’s promised StandDesk Pro 2.0 design that he anticipates to release sometime in the future. Originally we were informed we ‘d see it by June 2018. Greater than a year later it has yet to emerge, and Yu states he’s had trouble getting the product high quality he needs out of numerous Chinese manufacturing facilities he’s attempted dealing with. The new layout is apparently going to be much easier to assemble and have a heftier crossbar design, among other refinements. He claims the new base will certainly be provided in both a “T-Leg” as well as “C-Leg” arrangement, easing our worry about side-load emphasizing on the lifting columns.

If this new base ever before concerns market we’ll upgrade you below. We’re not holding our breath any type of longer as the most recent news on the business is that Yu shut the little Los Angeles workplace and has actually moved it to join with all its other workers in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with remarkable performance has actually been present via the brand-new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electric standing desk. While limited in size as well as shade alternatives, it has taken the mantle away from StandDesk’s long-ago standing as the best standing workdesk under $400.

error: Content is protected !!