Adustable Desk

The StandDesk was produced by millennials, is marketed straight at millennials, and has actually been gobbled up by millennials in impressive quantities. While it brings a ten-year guarantee (the longest of any type of Chinese-made base), in this instance it’s not always a reliable indicator of the anticipated beneficial life of the training columns. For the price, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis and also other Chinese-made desks. Despite its security concerns this is a far better item than the Autonomous SmartDesk or IKEA Bekant could ever before want to be, as well as a good value in general. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is winning over clients from both its more affordable as well as pricier peers.

StandDesk Building, Configuration, and also Gadgets

Building the desk is quite straight forward if you follow the detailed directions. All of the screws, bolts, washers, and also spring washers been available in different bags that are marked with their destination: table top, frame, and spares. There’s an included hex device for attaching all of the bolts into the structure, or, appear a hex little bit right into your power device– just beware not to over-tighten.

All of the components have an excellent quality coating to them with rounded edges to avoid cut hands. Below is a shot of all the screws that are fastened to the leg setting up– it’s not going anywhere!


The foot setting up additionally consists of height-adjustable rotation gears to support the front-to-back activity of the desk, which was very handy for the carpeted office flooring. I’m additionally utilizing a flooring mat to safeguard the carpet from chair wheel damages at sitting elevation, and press the chair when I’m transitioning to standing elevation.


The deluxe controller deserved the financial investment. The switches are all variable stress programmed, indicating the up and down arrows will certainly change the height by 1/10th of an inch with a single press, or continually adjust the elevation by around 0.7 inches per second if you hold the button for 2 seconds. The memory buttons are similar in design: push to remember the elevation setup, or hold the button down for 5 secs to save a brand-new height value. I’m making use of button 1 for my resting setting and also button 4 for my standing placement, which offers me 2 as well as 3 for anything I could require in the future.


Using my Standdesk

I have actually been using the brand-new desk for a few weeks as well as have made a note of my preliminary perceptions:

The motors are quiet yet can be heard in the following space over. It takes probably 25 seconds for the desk to completely change from sitting to standing based upon my presets.
I utilize an Ergotron side-by-side keep an eye on arm (specifically this LX design), creating the desk to get a little rocky when I change my weight against the key-board. In knowledge, I should have purchased the crossbar upgrade for my desk after determining the weight of my screens. If you plan to do a twin monitor setup, obtain the bar.

Because gravity presses the discs in a human spinal column, I need to elevate the desk greater in the morning and also reduced it in the evening.

An anti-fatigue floor covering is absolutely important for long duration standing. I acquired an Octagonal floor covering from SmartCells, making use of rubber “cells” that are envisioned below.


In spite of any kind of problems I might have had with the mobile phone or the cookie-cutter layout, basically every one of those concerns removed once I really came down to utilizing this thing.

I didn’t believe it was even feasible, the StandDesk somehow takes care of to be even a lot more secure than the Jarvis, both at resting and also standing heights. Most days I like to run my Jarvis at max height while pressed versus my wall surface; not always due to the fact that it’s that shaky, however just because I want as much security as I can obtain.

The StandDesk one ups the gambit even additionally, confirming to be just as constant on its own at standing elevation as the Jarvis is with wall support. This is all without the company’s crossbar enhancement, which they claim includes much more stability when acquired as a part of the package deal.When it comes to weight tolerance, the StandDesk shares yet even more stats with the Jarvis, being ranked for approximately 350 pounds of weight ability.

I have actually been using the desk for concerning three weeks currently for daily work (as well as complying with standing workdesk best practices), whether it’s inputting out evaluations like this one from our desktop computer or a laptop from time to time. The desk holds up well versus non-coastered drinks, and the finish in addition to the desk still really feels equally as smooth and also slick as the day I opened it regardless of days of perspiring wrists wresting on it and also multiple clean downs with a dustcloth.

Though I never purposefully attempt to dent any workdesks also hard, throughout some lighter examinations (tossing a set of tricks onto it from a distance, for instance), it still stood up without way too many visible indications of damage.

When I determined the sound result of the workdesk while it increased from a resting position to standing and also back once more, it was by much the quietest we’ve tested. I can barely get it to make more than regarding 9.5 dB of noise, so if your most significant worry is the whirr of your motor, this is certainly the one for you.

Customer care

Now, normally I don’t consist of much regarding the client service assistance of any kind of provided company, just because I feel that in general if an item works the method its supposed to, I shouldn’t ever before have a factor to call them to begin with. As well as while I wish I might state that held true throughout my experience with StandDesk, I just can not finish this testimonial without pointing out the many, seemingly endless problems I came across attempting to get my desk put together.

For beginners, the desk I was sent didn’t have any kind of memory phone consisted of initially, which indicated I had no other way of really managing the up/down function on the desk itself. I contacted StandDesk about this problem, that got back to me around a day later on with an apology as well as a guarantee that a brand-new one would certainly be shipped out quickly.

Standdesk evaluation handset

The resource of all our troubles …
About 4 days later a mobile phone arrived in the mail. The mobile originally activated, yet it wasn’t long prior to I discovered that none of the programmable switches worked, neither did the down switch, however, for some factor the “memory” button managed the down function simply fine. I got in touch with the firm once more, as well as they apologized for the mixup as well as said they would have a new panel and control box out to me within the week.

Over two weeks later my new panel and control box showed up. Once I installed them both the desk lastly began working the means it was supposed to, however not after nearly a month of waiting as well as back and forth with a firm that could not keep in mind to deliver a core part of their item inside the very same box from the start.

Points to Think about

Despite its bankable functions, this stand up desk likewise has its very own drawbacks. Given that no singular stand workdesk can record all of the functions that you might need, you may consider these in your decision-making.

Absence of a Crossbar as criterion

Not having a supporting crossbar is absolutely not a deal-breaker, specifically thinking about several of our other preferred workdesks such as the Totally Jarvis likewise don’t have one. This desk does have one if you desire, but it is a paid add-on (much more on this later too).

The crossbar is seen by some as a limitation, making it more difficult to place your legs pleasantly listed below the desk. Others, on the other hand, discover that they give added security, commonly critical when desks are totally prolonged.

We have not read any kind of grievances of the security of this desk, so we do not assume its something to really be concerned about, although if you really desired a workdesk with a bar after that we recommend you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a separate add-on crossbar that you can include to the workdesk on your own, simply for an extra $49.95.


The stability of a standing workdesk is just one of the most crucial aspects of these desks. Without a stable workdesk you’ll locate it difficult to concentrate, which could lead to you ending up being less curious about using the desk at standing height. To get the most effective return on your investment, you’ll intend to enjoy when utilizing the desk.

Because the StandDesk Simple is the first desk that I have examined with an optional cross support, I will break down my stability tests into two areas. Both examinations will consist of the common front to back rocking test and also a delegated ideal wobble. The very first will certainly lack the cross assistance as well as the second will certainly be with it. Simply to keep in mind, states that the addition of the cross assistance can raise stability by up to 15%. I have no idea just how they created that number.

Without Cross Assistance

Left to Right: The wobble examination was a different scenario. StandDesk Simple was the 2nd desk that I checked that tottered near the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the rocking motion was bad. Yet point it would influence your job.

With Cross Support

Front to Back: Adding the cross assistance does not impact the rocking motion. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking motion misbehaved.

Left to Right: Including the cross assistance to the StandDesk enhanced the wobble motion for lower elevations. With the cross assistance the wobble activity really did not start till you reached 35″. By 39″ the wobble activity came to be bad.

Keep in mind: It’s really important with adjustable standing desks to completely tighten all hardware. If there is hardware that is not totally tight, the motion experienced when encompassed standing elevation will certainly be exaggerated. This is specifically true with a desk framework that consists of 32 screws, there are far too many points at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we have actually checked in our labs, we have to narrow our referral on the StandDesk Pro to shorter individuals with narrower desktop computers, as the stability just isn’t there for a large mass raised high off the ground. American-made workdesks will be better matched to these applications, and also for a fairly noticeable factor. Basically all American-made bases are made in United States manufacturing facilities that are had by Swedish, Danish or German companies that invented this sector, as well as their average residents are a whole lot taller than the average Asian consumer, so they began making longer-stroke lifting legs a long period of time back. And also they have even more robot automation, laser-cutting tools, and also sheer experience making standing workdesk bases, needless to say.

If you’re not as well tall, don’t have an extreme quantity of heavy devices on your desktop computer, and also do not need too vast of a workdesk, the StandDesk Pro will give you great bang for your dollar.

All that might change with Yu’s guaranteed StandDesk Pro 2.0 design that he anticipates to release sometime in the future. Initially we were told we ‘d see it by June 2018. Greater than a year later on it has yet to appear, and Yu states he’s had trouble obtaining the item quality he requires out of several Chinese manufacturing facilities he’s tried collaborating with. The brand-new layout is supposedly going to be a lot easier to set up and have a heftier crossbar style, among other refinements. He says the brand-new base will certainly be provided in both a “T-Leg” and “C-Leg” setup, alleviating our problem regarding side-load stressing on the training columns.

If this new base ever involves market we’ll upgrade you right here. Yet we’re not holding our breath any kind of longer as one of the most current news on the business is that Yu shut the little Los Angeles workplace and also has relocated it to accompany all its various other employees in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with outstanding efficiency has actually been present with the new joint venture between US-based iMovR as well as China-based Eureka, the i1 electric standing desk. While restricted in size and also shade options, it has actually taken the mantle away from StandDesk’s long-ago condition as the very best standing workdesk under $400.

error: Content is protected !!