Advanced Wire Management Kit by Uplift Desk

The StandDesk was created by millennials, is marketed right at millennials, and also has actually been gobbled up by millennials in excellent volumes. While it lugs a ten-year warranty (the longest of any type of Chinese-made base), in this instance it’s not always a trusted sign of the anticipated useful life of the lifting columns. For the cost, the StandDesk is a terrific lower-cost alternative to the UpLift, Jarvis as well as various other Chinese-made workdesks. Regardless of its stability problems this is a far better product than the Autonomous SmartDesk or IKEA Bekant could ever want to be, as well as a good value on the whole. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is swaying consumers from both its more affordable and also more expensive peers.

StandDesk Construction, Configuration, and also Devices

Developing the desk is rather straight forward if you comply with the thorough directions. All of the screws, screws, washers, as well as springtime washers come in different bags that are marked with their location: table top, frame, as well as spares. There’s an included hex device for attaching all of the screws right into the frame, or, appear a hex little bit right into your power device– simply beware not to over-tighten.

Every one of the parts have an excellent quality coating to them with rounded edges to stay clear of cut hands. Below is a shot of all the screws that are secured to the leg assembly– it’s not going anywhere!


The foot assembly additionally consists of height-adjustable turning equipments to support the front-to-back activity of the desk, which was very handy for the carpeted home office floor. I’m additionally making use of a floor mat to protect the carpet from chair wheel damages at sitting elevation, and press the chair back when I’m transitioning to standing elevation.


The deluxe controller deserved the investment. The switches are all variable pressure programmed, indicating the up and down arrows will change the elevation by 1/10th of an inch with a solitary press, or continuously readjust the height by around 0.7 inches per 2nd if you hold the switch for two secs. The memory buttons are comparable in design: press to recall the height setup, or hold the button down for 5 seconds to keep a brand-new elevation worth. I’m using button 1 for my sitting placement and button 4 for my standing position, which offers me 2 and also 3 for anything I might require in the future.


Using my Standdesk

I have actually been using the new desk for a couple of weeks as well as have actually listed my initial impacts:

The motors are quiet but can be listened to in the next area over. It takes possibly 25 seconds for the desk to totally change from resting to standing based upon my presets.
I use an Ergotron side-by-side monitor arm (specifically this LX design), creating the desk to obtain a little rough when I change my weight versus the keyboard. In knowledge, I ought to have acquired the bar upgrade for my workdesk after figuring out the weight of my screens. If you prepare to do a double display arrangement, get the crossbar.

Because gravity compresses the discs in a human spinal column, I require to elevate the desk greater in the early morning and lower it in the evening.

An anti-fatigue floor covering is definitely vital for long period of time standing. I purchased an Octagonal mat from SmartCells, making use of rubber “cells” that are pictured listed below.


In spite of any troubles I might have had with the phone or the cookie-cutter design, pretty much all of those worries gotten rid of once I in fact got down to using this thing.

I didn’t believe it was also possible, the StandDesk in some way manages to be even much more secure than the Jarvis, both at sitting and also standing heights. Most days I such as to run my Jarvis at max height while pushed versus my wall; not always because it’s that shaky, yet just because I want as much security as I can get.

The StandDesk one ups the gambit also further, showing to be equally as consistent on its own at standing elevation as the Jarvis is with wall support. This is all without the company’s crossbar addition, which they declare includes even more stability when acquired as a part of the package deal.When it concerns weight resistance, the StandDesk shares yet even more stats with the Jarvis, being rated for as much as 350 pounds of weight capacity.

I have actually been utilizing the desk for regarding 3 weeks now for everyday job (as well as following standing workdesk best techniques), whether it’s keying out reviews such as this one from our desktop computer or a laptop every now and then. The desk stands up well versus non-coastered drinks, and the finish on top of the desk still really feels equally as smooth and slick as the day I opened it despite days of sweaty wrists wresting on it as well as multiple wipe downs with a dustcloth.

Though I never purposefully try to dent any kind of desks too hard, during some lighter examinations (throwing a collection of keys onto it from a distance, for example), it still held up without way too many noticeable indicators of damage.

When I measured the noise outcome of the desk while it climbed from a sitting placement to standing as well as back again, it was by far the quietest we’ve checked. I might hardly get it to make more than about 9.5 dB of sound, so if your most significant problem is the whirr of your motor, this is most definitely the one for you.

Customer support

Now, usually I do not include much about the customer service support of any type of offered company, only because I really feel that generally if an item functions the means its expected to, I shouldn’t ever before have a factor to call them in the first place. And also while I want I can say that held true throughout my experience with StandDesk, I just can’t finish this review without stating the numerous, apparently endless troubles I ran into attempting to obtain my workdesk put together.

For starters, the desk I was sent out really did not have any memory mobile consisted of originally, which indicated I had no other way of in fact controlling the up/down function on the desk itself. I called StandDesk concerning this issue, that returned to me around a day later on with an apology and also a guarantee that a brand-new one would be shipped out quickly.

Standdesk testimonial handset

The source of all our troubles …
Concerning four days later on a mobile phone got here in the mail. The mobile initially turned on, yet it had not been long before I discovered that none of the programmable switches functioned, nor did the down button, but for some factor the “memory” button managed the down function just fine. I contacted the firm once more, and they excused the mixup as well as stated they would certainly have a brand-new panel as well as control box bent on me within the week.

Over 2 weeks later my new panel as well as control box got here. When I installed them both the desk finally began working the way it was expected to, but not after virtually a month of waiting as well as to and fro with a business that could not remember to ship a core component of their item inside the same box from the beginning.

Things to Take into consideration

Despite its bankable features, this stand up workdesk likewise has its own downsides. Given that no singular stand workdesk can capture all of the features that you may need, you may think about these in your decision-making.

Lack of a Bar as standard

Not having a supporting crossbar is certainly not a deal-breaker, particularly considering some of our various other preferred desks such as the Fully Jarvis likewise don’t have one. This workdesk does have one if you want, but it is a paid add-on (more on this later on as well).

The bar is seen by some as a barrier, making it more difficult to position your legs conveniently listed below the desk. Others, on the other hand, discover that they offer added stability, usually vital when desks are completely extended.

We have not review any kind of issues of the security of this workdesk, so we do not believe its something to really be concerned about, although if you actually desired a workdesk with a crossbar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a separate add-on bar that you can include to the desk on your own, just for an extra $49.95.


The security of a standing workdesk is just one of the most important facets of these desks. Without a stable workdesk you’ll discover it difficult to concentrate, which might lead to you coming to be less curious about making use of the desk at standing height. To obtain the very best return on your financial investment, you’ll want to be happy when using the desk.

Because the StandDesk Simple is the initial workdesk that I have examined with an optional cross assistance, I will certainly break down my security examinations into 2 areas. Both examinations will include the common front to back rocking examination and also a delegated ideal wobble. The initial will certainly be without the cross support and also the secondly will be with it. Just to keep in mind, states that the enhancement of the cross assistance can increase stability by as much as 15%. I have no concept exactly how they created that number.

Without Cross Assistance

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the second desk that I tested that tottered at the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it reached 36″ the rocking movement misbehaved. Yet factor it would certainly impact your job.

With Cross Support

Front to Back: Adding the cross assistance does not impact the shaking activity. The StandDesk Simple began to experienced a shaking activity at 36″. By 41″ the shaking motion misbehaved.

Entrusted to Right: Including the cross support to the StandDesk enhanced the wobble movement for reduced heights. With the cross assistance the wobble motion didn’t start till you reached 35″. By 39″ the wobble movement ended up being negative.

Keep in mind: It’s very vital with flexible standing desks to fully tighten up all equipment. If there is hardware that is not totally tight, the activity experienced when reached standing elevation will certainly be overemphasized. This is specifically true with a desk structure that includes 32 screws, there are much way too many points at which the desk has a possibility to relocate.


Like all the Chinese bases we have actually tested in our labs, we need to narrow our recommendation on the StandDesk Pro to shorter users with narrower desktop computers, as the stability just isn’t there for a huge mass boosted high off the ground. American-made desks will be better suited to these applications, and also for a fairly apparent factor. Basically all American-made bases are made in US manufacturing facilities that are owned by Swedish, Danish or German firms that invented this industry, and their typical citizens are a lot taller than the ordinary Asian consumer, so they started making longer-stroke training legs a very long time earlier. As well as they have far more robot automation, laser-cutting devices, as well as large experience making standing desk bases, obviously.

If you’re not too tall, don’t have an inordinate quantity of heavy equipment on your desktop computer, and don’t need also wide of a desk, the StandDesk Pro will certainly provide you good bang for your dollar.

All that could change with Yu’s assured StandDesk Pro 2.0 style that he expects to release at some time in the future. Initially we were informed we would certainly see it by June 2018. More than a year later it has yet to emerge, as well as Yu states he’s had difficulty getting the product top quality he requires out of several Chinese manufacturing facilities he’s attempted dealing with. The new design is supposedly going to be much easier to set up as well as have a heftier crossbar layout, among other refinements. He says the new base will certainly be used in both a “T-Leg” and “C-Leg” arrangement, relieving our concern about side-load emphasizing on the training columns.

If this brand-new base ever before comes to market we’ll update you below. However we’re not holding our breath any kind of longer as one of the most recent news on the business is that Yu closed the small Los Angeles workplace as well as has relocated it to accompany all its other workers in southeast Asia.

In the meantime, a brand-new $399 standing desk with excellent performance has actually been introduce via the new joint venture in between US-based iMovR and also China-based Eureka, the i1 electrical standing workdesk. While limited in size and shade alternatives, it has taken the mantle away from StandDesk’s long-ago condition as the most effective standing workdesk under $400.

error: Content is protected !!