Uplift Height Adjustable Sit Stand Desk

The StandDesk was produced by millennials, is marketed right at millennials, as well as has actually been demolished by millennials in outstanding quantities. While it brings a ten-year guarantee (the lengthiest of any type of Chinese-made base), in this instance it’s not always a trustworthy indication of the anticipated valuable life of the training columns. But for the rate, the StandDesk is an excellent lower-cost option to the UpLift, Jarvis as well as other Chinese-made workdesks. Despite its stability problems this is a much much better item than the Autonomous SmartDesk or IKEA Bekant can ever want to be, and a good value in general. It’s the mid-priced offering in the broad category of Chinese-made workdesks that is winning over consumers from both its less expensive and pricier peers.

StandDesk Construction, Setup, as well as Gizmos

Building the desk is quite easy if you adhere to the thorough directions. Every one of the screws, screws, washers, and also spring washing machines been available in different bags that are marked with their location: table top, frame, and spares. There’s an included hex tool for securing every one of the bolts right into the structure, or, appear a hex bit into your power tool– just be careful not to over-tighten.

All of the parts have a high quality surface to them with rounded corners to stay clear of cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot assembly additionally includes height-adjustable turning gears to support the front-to-back movement of the desk, which was really valuable for the carpeted home office flooring. I’m likewise making use of a flooring mat to secure the carpet from chair wheel damage at resting elevation, and also press the chair when I’m transitioning to standing elevation.


The luxurious controller was worth the financial investment. The buttons are all variable pressure configured, implying the backwards and forwards arrows will certainly adjust the height by 1/10th of an inch with a solitary press, or continuously adjust the height by about 0.7 inches per second if you hold the switch for two seconds. The memory buttons are comparable in layout: push to remember the elevation setup, or hold the button down for five seconds to keep a new elevation value. I’m making use of switch 1 for my sitting position as well as switch 4 for my standing placement, which gives me 2 and 3 for anything I may need in the future.


Using my Standdesk

I’ve been using the brand-new workdesk for a couple of weeks as well as have listed my first impressions:

The motors are quiet however can be listened to in the following space over. It takes perhaps 25 secs for the desk to fully transition from resting to standing based upon my presets.
I use an Ergotron side-by-side check arm (specifically this LX design), creating the desk to get a little rocky when I shift my weight versus the keyboard. In hindsight, I should have purchased the bar upgrade for my desk after determining the weight of my displays. If you intend to do a double screen configuration, obtain the bar.

Because gravity compresses the discs in a human back, I require to elevate the desk greater in the morning as well as lower it at night.

An anti-fatigue floor covering is definitely necessary for long duration standing. I purchased an Octagonal mat from SmartCells, utilizing rubber “cells” that are visualized listed below.


Regardless of any troubles I might have had with the mobile phone or the cookie-cutter style, virtually all of those issues washed away as soon as I in fact came down to utilizing this thing.

Although I really did not believe it was also possible, the StandDesk in some way handles to be much more stable than the Jarvis, both at resting and standing elevations. Many days I such as to run my Jarvis at max height while pressed versus my wall; not necessarily due to the fact that it’s that unsteady, but just because I want as much stability as I can get.

The StandDesk one ups the gambit also additionally, proving to be just as constant on its own at standing height as the Jarvis is with wall support. This is all without the firm’s crossbar addition, which they claim includes a lot more stability when acquired as a part of the plan deal.When it pertains to weight resistance, the StandDesk shares yet even more stats with the Jarvis, being rated for approximately 350 lbs of weight capability.

I have actually been using the desk for about 3 weeks now for everyday job (as well as complying with standing workdesk finest techniques), whether it’s inputting out testimonials similar to this one from our desktop or a laptop from time to time. The desk holds up well against non-coastered drinks, and also the surface on top of the desk still really feels equally as smooth and glossy as the day I opened it despite days of sweaty wrists wresting on it and also multiple wipe downs with a rag.

Though I never intentionally try to dent any desks too hard, during some lighter examinations (tossing a collection of secrets onto it from a distance, as an example), it still held up without way too many visible signs of damage.

When I measured the sound result of the workdesk while it climbed from a sitting position to standing and back once more, it was by far the quietest we have actually evaluated. I can hardly get it to make greater than regarding 9.5 dB of sound, so if your most significant worry is the whirr of your motor, this is most definitely the one for you.

Customer Service

Currently, typically I do not consist of much concerning the customer service support of any kind of given firm, only because I feel that generally if a product works the way its supposed to, I should not ever before have a factor to call them in the first place. As well as while I want I could claim that was the case throughout my experience with StandDesk, I just can’t finish this review without pointing out the numerous, apparently endless issues I ran into attempting to get my workdesk put together.

For beginners, the desk I was sent really did not have any kind of memory mobile included initially, which suggested I had no chance of really regulating the up/down feature on the desk itself. I got in touch with StandDesk about this concern, who got back to me around a day later with an apology and also a promise that a new one would certainly be shipped out quickly.

Standdesk evaluation handset

The source of all our problems …
About 4 days later on a mobile showed up in the mail. The mobile phone at first turned on, but it had not been long before I observed that none of the programmable switches worked, nor did the down switch, but also for some factor the “memory” switch handled the down feature just great. I got in touch with the firm again, as well as they excused the mixup and also claimed they would have a new panel and control box out to me within the week.

Over 2 weeks later my brand-new panel as well as control box got here. When I installed them both the desk finally started functioning the method it was meant to, but not after practically a month of waiting as well as backward and forward with a business that could not keep in mind to ship a core part of their item inside the exact same box from the start.

Points to Take into consideration

Despite its bankable features, this stand up workdesk likewise has its very own disadvantages. Given that no single stand workdesk can record every one of the functions that you may need, you might think about these in your decision-making.

Lack of a Crossbar as requirement

Not having a stabilizing bar is definitely not a deal-breaker, specifically considering a few of our various other preferred workdesks such as the Fully Jarvis also do not have one. In fact, this desk does have one if you want, but it is a paid add-on (extra on this later also).

The crossbar is seen by some as an obstacle, making it tougher to place your legs conveniently below the desk. Others, on the other hand, discover that they supply added security, frequently essential when workdesks are completely prolonged.

We have not read any problems of the security of this workdesk, so we don’t believe its something to really be concerned concerning, although if you truly desired a desk with a bar after that we advise you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does use a separate add-on bar that you can contribute to the desk yourself, just for an additional $49.95.


The stability of a standing desk is among the most essential facets of these desks. Without a steady desk you’ll find it hard to concentrate, which could lead to you coming to be less interested in making use of the desk at standing height. To obtain the most effective return on your financial investment, you’ll want to be happy when using the desk.

Due To The Fact That the StandDesk Simple is the first desk that I have actually checked with an optional cross assistance, I will certainly break down my stability tests right into two sections. Both examinations will consist of the regular front to back shaking test as well as a left to appropriate wobble. The first will lack the cross support as well as the second will be with it. Just to note, says that the enhancement of the cross support can increase security by as much as 15%. I have no concept just how they thought of that number.

Without Cross Assistance

Left to Right: The wobble test was a different scenario. StandDesk Simple was the second desk that I examined that wobbled near the bottom with weight on the desktop. The initial was the IKEA Bekant. By the time it got to 36″ the rocking motion misbehaved. Beyond this factor it would certainly impact your work.

With Cross Assistance

Front to Back: Adding the cross assistance does not impact the rocking movement. The StandDesk Simple started to experienced a rocking motion at 36″. By 41″ the rocking activity misbehaved.

Delegated Right: Including the cross assistance to the StandDesk improved the wobble activity for reduced heights. With the cross support the wobble motion really did not start until you got to 35″. By 39″ the wobble movement became poor.

Keep in mind: It’s extremely vital with flexible standing workdesks to totally tighten up all equipment. If there is hardware that is not completely limited, the motion experienced when extended to standing elevation will certainly be overemphasized. This is especially real with a workdesk structure that consists of 32 screws, there are much too many points at which the desk has a chance to move.

Final thought

Like all the Chinese bases we have actually tested in our labs, we have to narrow our recommendation on the StandDesk Pro to much shorter users with narrower desktop computers, as the stability just isn’t there for a huge mass elevated high off the ground. American-made desks will be much better suited to these applications, and also for a fairly obvious reason. Practically all American-made bases are made in United States manufacturing facilities that are had by Swedish, Danish or German firms that developed this industry, and their average residents are a whole lot taller than the average Asian consumer, so they started making longer-stroke lifting legs a long period of time earlier. And they have much more robotic automation, laser-cutting tools, as well as sheer experience making standing desk bases, needless to say.

Yet if you’re not too tall, don’t have an inordinate amount of hefty equipment on your desktop, and do not need also wide of a desk, the StandDesk Pro will certainly give you good bang for your buck.

All that may change with Yu’s promised StandDesk Pro 2.0 style that he expects to launch at some time in the future. Originally we were told we would certainly see it by June 2018. Greater than a year later it has yet to emerge, as well as Yu states he’s had trouble obtaining the item quality he needs out of numerous Chinese manufacturing facilities he’s attempted working with. The new layout is allegedly mosting likely to be much easier to set up and have a heftier bar design, to name a few improvements. He states the brand-new base will be offered in both a “T-Leg” as well as “C-Leg” arrangement, relieving our concern about side-load emphasizing on the lifting columns.

If this brand-new base ever before comes to market we’ll update you here. We’re not holding our breath any type of longer as the most current information on the business is that Yu shut the small Los Angeles workplace as well as has relocated it to join with all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with remarkable efficiency has actually been present via the new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While restricted in size and also color alternatives, it has taken the mantle far from StandDesk’s long-ago condition as the best standing desk under $400.

error: Content is protected !!