Amazon Stand Steady Desk

The StandDesk was created by millennials, is marketed right at millennials, as well as has been demolished by millennials in remarkable quantities. While it lugs a ten-year warranty (the lengthiest of any Chinese-made base), in this situation it’s not necessarily a trusted indicator of the anticipated useful life of the training columns. But for the rate, the StandDesk is a terrific lower-cost option to the UpLift, Jarvis as well as various other Chinese-made desks. Regardless of its stability problems this is a much much better product than the Autonomous SmartDesk or IKEA Bekant can ever before intend to be, as well as a good value overall. It’s the mid-priced offering in the broad group of Chinese-made desks that is gaining consumers from both its less costly and also more expensive peers.

StandDesk Building, Arrangement, and also Gadgets

Building the desk is quite simple if you comply with the comprehensive instructions. All of the screws, bolts, washers, as well as spring washers been available in separate bags that are noted with their destination: tabletop, frame, and spares. There’s an included hex tool for securing every one of the screws right into the framework, or, pop in a hex bit right into your power tool– just beware not to over-tighten.

All of the parts have a top quality coating to them with rounded corners to prevent cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot setting up also consists of height-adjustable turning equipments to stabilize the front-to-back activity of the desk, which was extremely useful for the carpeted office floor. I’m also making use of a flooring mat to protect the carpet from chair wheel damages at sitting height, and push the chair back when I’m transitioning to standing height.


The luxurious controller deserved the investment. The switches are all variable stress configured, meaning the backwards and forwards arrows will adjust the elevation by 1/10th of an inch with a single press, or constantly readjust the height by about 0.7 inches per second if you hold the switch for 2 secs. The memory switches are similar in layout: press to recall the height setup, or hold the button down for 5 seconds to save a brand-new elevation worth. I’m making use of button 1 for my resting setting as well as switch 4 for my standing placement, which offers me 2 as well as 3 for anything I could require in the future.


Using my Standdesk

I’ve been making use of the brand-new desk for a few weeks as well as have jotted down my preliminary impacts:

The electric motors are quiet however can be heard in the next room over. It takes probably 25 seconds for the desk to totally shift from resting to standing based upon my presets.
I use an Ergotron side-by-side check arm (particularly this LX design), triggering the desk to get a little rough when I change my weight versus the keyboard. In hindsight, I ought to have acquired the bar upgrade for my workdesk after determining the weight of my displays. If you intend to do a dual monitor arrangement, obtain the crossbar.

Since gravity presses the discs in a human back, I need to raise the desk greater in the morning as well as lower it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I acquired an Octagonal floor covering from SmartCells, making use of rubber “cells” that are pictured below.


In spite of any troubles I may have had with the phone or the cookie-cutter layout, virtually every one of those issues removed once I in fact got down to using this point.

I didn’t believe it was even feasible, the StandDesk in some way manages to be also much more stable than the Jarvis, both at sitting as well as standing heights. Most days I such as to run my Jarvis at max height while pressed against my wall surface; not necessarily since it’s that shaky, but just because I want as much stability as I can obtain.

The StandDesk one ups the gambit also better, verifying to be just as consistent by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s crossbar enhancement, which they assert includes even more security when bought as a part of the plan deal.When it concerns weight resistance, the StandDesk shares yet a lot more stats with the Jarvis, being rated for as much as 350 lbs of weight capacity.

I’ve been utilizing the desk for about 3 weeks currently for day-to-day job (and adhering to standing desk ideal techniques), whether it’s keying out evaluations similar to this one from our desktop computer or a laptop periodically. The desk stands up well against non-coastered beverages, and also the coating in addition to the desk still really feels just as smooth and also slick as the day I opened it in spite of days of perspiring wrists wresting on it as well as several clean downs with a cloth.

I never intentionally attempt to dent any kind of workdesks as well hard, throughout some lighter examinations (throwing a collection of secrets onto it from a range, for instance), it still held up without too several noticeable signs of damage.

When I measured the sound outcome of the workdesk while it increased from a sitting setting to standing and also back once again, it was by far the quietest we’ve examined. I could barely get it to make greater than concerning 9.5 dB of sound, so if your largest worry is the whirr of your motor, this is absolutely the one for you.

Client service

Currently, usually I don’t consist of much concerning the customer care support of any kind of provided company, just since I feel that in general if a product functions the method its expected to, I shouldn’t ever have a factor to call them in the first place. And while I wish I might state that held true throughout my experience with StandDesk, I merely can’t finish this testimonial without pointing out the numerous, apparently limitless problems I came across attempting to obtain my workdesk put together.

For starters, the desk I was sent out didn’t have any kind of memory handset included initially, which suggested I had no other way of actually controlling the up/down function on the desk itself. I got in touch with StandDesk regarding this concern, who got back to me around a day later with an apology and also a pledge that a new one would certainly be shipped out quickly.

Standdesk testimonial handset

The source of all our troubles …
Regarding 4 days later on a phone got here in the mail. The handset initially switched on, but it had not been long prior to I noticed that none of the programmable switches worked, nor did the down button, however, for some reason the “memory” switch managed the down feature simply great. I contacted the company once again, and they excused the mixup as well as claimed they would certainly have a new panel as well as control box out to me within the week.

Over two weeks later my new panel and control box got here. Once I installed them both the desk lastly began working the method it was expected to, but not after practically a month of waiting and also backward and forward with a firm that couldn’t remember to ship a core part of their product inside the same box from the start.

Things to Consider

Despite its bankable attributes, this stand workdesk additionally has its own disadvantages. Given that no singular stand desk might catch every one of the attributes that you might need, you may consider these in your decision-making.

Absence of a Crossbar as requirement

Not having a supporting crossbar is absolutely not a deal-breaker, specifically thinking about several of our other preferred desks such as the Fully Jarvis likewise don’t have one. This desk does have one if you want, however it is a paid add-on (much more on this later on as well).

The crossbar is seen by some as a hindrance, making it tougher to place your legs pleasantly below the desk. Others, on the other hand, find that they supply included stability, often crucial when workdesks are fully expanded.

We have not check out any kind of grievances of the security of this workdesk, so we don’t assume its something to really be worried about, although if you really wanted a desk with a crossbar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a different add-on bar that you can add to the workdesk yourself, just for an extra $49.95.


The stability of a standing desk is one of one of the most essential facets of these desks. Without a stable desk you’ll locate it tough to concentrate, which can result in you ending up being much less curious about making use of the desk at standing elevation. To get the best return on your financial investment, you’ll wish to enjoy when making use of the desk.

Because the StandDesk Simple is the first workdesk that I have actually tested with an optional cross support, I will break down my security tests into two areas. Both examinations will certainly consist of the common front to back shaking test as well as an entrusted to ideal wobble. The initial will certainly be without the cross support and the second will be with it. Simply to keep in mind, StandDesk.co states that the addition of the cross support can boost stability by as much as 15%. I have no suggestion exactly how they generated that number.

Without Cross Support

Left to Right: The wobble examination was a different situation. StandDesk Simple was the 2nd desk that I examined that tottered at the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it got to 36″ the rocking motion was bad. Beyond this factor it would impact your job.

With Cross Support

Front to Back: Adding the cross assistance does not influence the rocking activity. The StandDesk Simple began to experienced a rocking activity at 36″. By 41″ the shaking movement misbehaved.

Entrusted to Right: Adding the cross assistance to the StandDesk boosted the wobble movement for lower elevations. With the cross support the wobble motion didn’t begin until you reached 35″. By 39″ the wobble movement ended up being bad.

Note: It’s really important with flexible standing workdesks to fully tighten up all hardware. If there is hardware that is not entirely tight, the activity experienced when extended to standing elevation will certainly be exaggerated. This is especially real with a workdesk structure that includes 32 screws, there are much way too many factors at which the desk has a possibility to move.

Final thought

Like all the Chinese bases we’ve tested in our laboratories, we need to narrow our recommendation on the StandDesk Pro to much shorter customers with narrower desktop computers, as the stability just isn’t there for a big mass elevated high off the ground. American-made desks will be much better fit to these applications, and also for a rather obvious factor. Practically all American-made bases are made in United States factories that are owned by Swedish, Danish or German business that created this sector, as well as their ordinary people are a lot taller than the average Eastern consumer, so they started making longer-stroke training legs a long time back. And they have far more robot automation, laser-cutting tools, and also large experience making standing workdesk bases, obviously.

However if you’re not as well high, don’t have an extreme quantity of hefty devices on your desktop, and also don’t need as well wide of a desk, the StandDesk Pro will certainly provide you good bang for your buck.

All that might transform with Yu’s assured StandDesk Pro 2.0 style that he expects to release sometime in the future. Initially we were informed we ‘d see it by June 2018. Greater than a year later on it has yet to emerge, and also Yu states he’s had problem obtaining the product quality he needs out of several Chinese factories he’s attempted collaborating with. The new style is supposedly going to be a lot easier to set up and also have a heftier crossbar style, to name a few improvements. He states the new base will certainly be supplied in both a “T-Leg” and “C-Leg” configuration, alleviating our problem about side-load emphasizing on the lifting columns.

If this new base ever comes to market we’ll update you right here. However we’re not holding our breath any kind of longer as the most recent information on the business is that Yu shut the little Los Angeles office as well as has actually transferred it to join with all its various other staff members in southeast Asia.

In the meantime, a new $399 standing desk with outstanding efficiency has actually been introduce with the new joint venture in between US-based iMovR and China-based Eureka, the i1 electrical standing desk. While restricted in size and shade choices, it has actually taken the mantle away from StandDesk’s long-ago status as the best standing desk under $400.

error: Content is protected !!