Amazon Vivo Quad Lcd Monitor Desk Mount Stand Heavy Duty Fully Adjustable

The StandDesk was produced by millennials, is marketed right at millennials, and also has been gobbled up by millennials in outstanding volumes. While it lugs a ten-year guarantee (the lengthiest of any Chinese-made base), in this situation it’s not necessarily a trusted indication of the expected valuable life of the training columns. For the cost, the StandDesk is a great lower-cost alternative to the UpLift, Jarvis as well as various other Chinese-made desks. Despite its stability concerns this is a far better product than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, and a good value generally. It’s the mid-priced offering in the broad classification of Chinese-made workdesks that is gaining clients from both its cheaper and more expensive peers.

StandDesk Building, Configuration, and Devices

Developing the desk is rather simple if you comply with the comprehensive directions. Every one of the screws, bolts, washers, as well as springtime washing machines been available in separate bags that are noted with their location: table top, frame, as well as spares. There’s an included hex device for fastening every one of the bolts right into the framework, or, appear a hex little bit right into your power device– simply beware not to over-tighten.

Every one of the components have a premium quality finish to them with rounded edges to stay clear of cut hands. Below is a shot of all the screws that are secured to the leg assembly– it’s not going anywhere!


The foot assembly additionally includes height-adjustable turning gears to stabilize the front-to-back activity of the desk, which was very practical for the carpeted home office flooring. I’m additionally utilizing a flooring mat to shield the carpeting from chair wheel damage at resting height, and push the chair when I’m transitioning to standing height.


The luxurious controller deserved the financial investment. The buttons are all variable pressure set, suggesting the up and down arrowheads will change the height by 1/10th of an inch with a single press, or continuously adjust the height by about 0.7 inches per 2nd if you hold the switch for 2 secs. The memory buttons are similar in layout: press to remember the elevation setup, or hold the button down for 5 secs to store a new elevation worth. I’m making use of switch 1 for my resting placement and button 4 for my standing placement, which gives me 2 as well as 3 for anything I could need in the future.


Utilizing my Standdesk

I’ve been using the new desk for a couple of weeks and have documented my initial perceptions:

The electric motors are quiet yet can be listened to in the next area over. It takes maybe 25 seconds for the desk to fully change from sitting to standing based upon my presets.
I make use of an Ergotron side-by-side keep an eye on arm (particularly this LX version), creating the desk to obtain a little rocky when I move my weight versus the key-board. In hindsight, I should have acquired the crossbar upgrade for my workdesk after figuring out the weight of my displays. If you plan to do a dual display configuration, get the crossbar.

Because gravity compresses the discs in a human back, I require to increase the desk higher in the morning as well as lower it in the evening.

An anti-fatigue floor covering is absolutely crucial for long duration standing. I bought an Octagonal mat from SmartCells, utilizing rubber “cells” that are visualized listed below.


In spite of any troubles I might have had with the mobile phone or the cookie-cutter layout, pretty much every one of those issues gotten rid of once I in fact came down to using this point.

I really did not assume it was even feasible, the StandDesk in some way takes care of to be even a lot more steady than the Jarvis, both at resting and standing elevations. A lot of days I like to run my Jarvis at max height while pushed against my wall surface; not always due to the fact that it’s that shaky, yet even if I want as much security as I can obtain.

The StandDesk one ups the gambit also additionally, showing to be just as consistent by itself at standing elevation as the Jarvis is with wall support. This is all without the business’s bar addition, which they declare adds a lot more security when acquired as a part of the plan deal.When it concerns weight tolerance, the StandDesk shares yet much more stats with the Jarvis, being ranked for up to 350 pounds of weight capability.

I have actually been making use of the desk for about three weeks currently for day-to-day job (and also complying with standing desk best practices), whether it’s inputting out testimonials similar to this one from our desktop computer or a laptop every now and then. The desk holds up well against non-coastered beverages, and the finish on top of the desk still feels just as smooth and slick as the day I opened it in spite of days of perspiring wrists wresting on it as well as several clean downs with a rag.

Though I never ever intentionally attempt to damage any workdesks too hard, during some lighter examinations (tossing a collection of tricks onto it from a range, as an example), it still stood up without too many noticeable signs of damages.

Lastly, when I gauged the noise output of the desk while it increased from a resting setting to standing as well as back once again, it was by far the quietest we have actually evaluated yet. I can barely get it to make more than regarding 9.5 dB of sound, so if your greatest concern is the whirr of your electric motor, this is definitely the one for you.

Customer care

Currently, generally I do not consist of much about the customer service assistance of any kind of provided firm, just due to the fact that I really feel that in general if a product works the means its intended to, I shouldn’t ever before have a reason to call them to begin with. And while I wish I could say that held true during my experience with StandDesk, I simply can’t finish this testimonial without discussing the various, relatively countless problems I ran into trying to get my workdesk created.

For starters, the desk I was sent out didn’t have any type of memory mobile phone consisted of initially, which meant I had no other way of actually regulating the up/down feature on the desk itself. I contacted StandDesk about this concern, that got back to me around a day later on with an apology and also a promise that a brand-new one would certainly be shipped out shortly.

Standdesk evaluation handset

The source of all our troubles …
Concerning 4 days later a phone showed up in the mail. The handset at first turned on, however it had not been long prior to I noticed that none of the programmable switches worked, neither did the down switch, but for some factor the “memory” switch dealt with the down feature simply great. I contacted the company once again, as well as they apologized for the mixup and claimed they would have a new panel and control box out to me within the week.

Over 2 weeks later on my new panel as well as control box arrived. As soon as I installed them both the desk lastly started functioning the method it was meant to, but not after practically a month of waiting and also backward and forward with a company that could not bear in mind to deliver a core component of their product inside the same box from the start.

Things to Consider

In spite of its bankable features, this stand up workdesk additionally has its own drawbacks. Given that no singular stand desk could capture all of the features that you may require, you might think about these in your decision-making.

Lack of a Crossbar as standard

Not having a maintaining crossbar is absolutely not a deal-breaker, especially taking into consideration some of our various other favored workdesks such as the Completely Jarvis also don’t have one. As a matter of fact, this desk does have one if you desire, but it is a paid add-on (much more on this later on also).

The crossbar is seen by some as a limitation, making it more difficult to position your legs easily below the desk. Others, on the other hand, discover that they provide included stability, frequently critical when workdesks are fully expanded.

We have not review any type of complaints of the security of this desk, so we don’t believe its something to actually be concerned regarding, although if you truly desired a desk with a crossbar after that we advise you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does offer a different add-on bar that you can add to the desk on your own, simply for an additional $49.95.


The stability of a standing desk is among the most crucial elements of these workdesks. Without a stable workdesk you’ll locate it difficult to focus, which might lead to you ending up being much less curious about making use of the desk at standing elevation. To get the very best return on your investment, you’ll intend to enjoy when making use of the desk.

Because the StandDesk Simple is the very first desk that I have examined with an optional cross support, I will certainly break down my stability tests right into two areas. Both tests will certainly include the typical front to back shaking examination and a left to best wobble. The initial will certainly lack the cross assistance and the second will certainly be with it. Simply to keep in mind, states that the enhancement of the cross support can boost security by as much as 15%. I have no suggestion exactly how they thought of that number.

Without Cross Assistance

Left to Right: The wobble examination was a various situation. StandDesk Simple was the second workdesk that I evaluated that tottered at the bottom with weight on the desktop. The first was the IKEA Bekant. By the time it got to 36″ the shaking motion was bad. Yet point it would certainly impact your work.

With Cross Assistance

Front to Back: Including the cross assistance does not impact the rocking motion. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the rocking motion was bad.

Delegated Right: Adding the cross assistance to the StandDesk improved the wobble motion for lower elevations. With the cross assistance the wobble movement really did not begin up until you got to 35″. By 39″ the wobble activity ended up being bad.

Keep in mind: It’s very crucial with flexible standing desks to fully tighten up all hardware. If there is hardware that is not completely limited, the movement experienced when encompassed standing elevation will be overemphasized. This is especially real with a workdesk structure that consists of 32 screws, there are much too many points at which the desk has a chance to relocate.


Like all the Chinese bases we’ve examined in our laboratories, we have to tighten our recommendation on the StandDesk Pro to much shorter individuals with narrower desktop computers, as the security just isn’t there for a big mass raised high off the ground. American-made workdesks will certainly be much better fit to these applications, and for a fairly obvious reason. Basically all American-made bases are made in United States factories that are had by Swedish, Danish or German companies that invented this sector, as well as their average citizens are a whole lot taller than the ordinary Eastern customer, so they started making longer-stroke lifting legs a long period of time earlier. And they have much more robotic automation, laser-cutting devices, and also sheer experience making standing desk bases, needless to say.

If you’re not also tall, do not have an extreme amount of heavy equipment on your desktop, and also do not require also large of a desk, the StandDesk Pro will certainly give you excellent bang for your buck.

All that could alter with Yu’s guaranteed StandDesk Pro 2.0 layout that he expects to launch at some time in the future. Initially we were informed we ‘d see it by June 2018. More than a year later on it has yet to emerge, and also Yu states he’s had problem getting the item quality he requires out of numerous Chinese manufacturing facilities he’s tried dealing with. The new style is allegedly mosting likely to be a lot easier to assemble and have a heftier bar layout, among other improvements. He states the new base will be offered in both a “T-Leg” as well as “C-Leg” setup, alleviating our issue about side-load emphasizing on the training columns.

If this new base ever comes to market we’ll upgrade you below. We’re not holding our breath any type of longer as the most recent news on the business is that Yu closed the little Los Angeles office and has actually relocated it to join with all its various other workers in southeast Asia.

In the meantime, a brand-new $399 standing desk with outstanding performance has been introduce with the new joint endeavor in between US-based iMovR and also China-based Eureka, the i1 electrical standing workdesk. While limited in size as well as shade choices, it has taken the mantle away from StandDesk’s long-ago standing as the very best standing workdesk under $400.

error: Content is protected !!