Are Monitor Arms Worth It

The StandDesk was produced by millennials, is marketed directly at millennials, and has been gobbled up by millennials in remarkable quantities. While it lugs a ten-year service warranty (the lengthiest of any kind of Chinese-made base), in this case it’s not necessarily a trustworthy indication of the anticipated beneficial life of the training columns. For the rate, the StandDesk is a wonderful lower-cost choice to the UpLift, Jarvis and also other Chinese-made workdesks. In spite of its stability concerns this is a much better product than the Autonomous SmartDesk or IKEA Bekant can ever before wish to be, and also a good value on the whole. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is swaying consumers from both its less costly and pricier peers.

StandDesk Building, Arrangement, and Devices

Developing the desk is quite simple if you follow the in-depth directions. All of the screws, bolts, washers, and also springtime washers can be found in separate bags that are noted with their destination: tabletop, frame, as well as spares. There’s a consisted of hex device for securing all of the bolts into the structure, or, appear a hex bit into your power device– simply take care not to over-tighten.

Every one of the components have a premium quality coating to them with rounded corners to avoid cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!


The foot assembly likewise includes height-adjustable rotation equipments to support the front-to-back activity of the desk, which was very helpful for the carpeted office floor. I’m additionally using a floor mat to safeguard the rug from chair wheel damages at sitting height, and also push the chair when I’m transitioning to standing height.


The luxurious controller was worth the financial investment. The buttons are all variable pressure configured, meaning the up and down arrowheads will adjust the height by 1/10th of an inch with a single press, or continually adjust the elevation by about 0.7 inches per 2nd if you hold the switch for 2 seconds. The memory buttons are comparable in layout: press to recall the elevation setting, or hold the button down for 5 secs to store a new height worth. I’m utilizing switch 1 for my sitting placement and also button 4 for my standing placement, which gives me 2 and 3 for anything I might need in the future.


Utilizing my Standdesk

I’ve been utilizing the new desk for a couple of weeks as well as have actually written down my initial impressions:

The electric motors are quiet however can be heard in the following space over. It takes probably 25 seconds for the desk to totally change from resting to standing based upon my presets.
I make use of an Ergotron side-by-side check arm (specifically this LX version), triggering the desk to obtain a little rough when I shift my weight against the keyboard. In hindsight, I should have acquired the bar upgrade for my workdesk after identifying the weight of my monitors. If you intend to do a dual screen setup, get the crossbar.

Since gravity compresses the discs in a human spine, I need to raise the desk higher in the morning and also lower it in the evening.

An anti-fatigue mat is absolutely necessary for long duration standing. I bought an Octagonal mat from SmartCells, utilizing rubber “cells” that are envisioned listed below.


In spite of any kind of problems I may have had with the mobile or the cookie-cutter style, pretty much every one of those concerns removed as soon as I actually got down to utilizing this thing.

I really did not assume it was also possible, the StandDesk somehow takes care of to be also much more stable than the Jarvis, both at sitting and also standing heights. Most days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not always because it’s that shaky, yet even if I want as much stability as I can get.

The StandDesk one ups the gambit even further, confirming to be equally as stable by itself at standing elevation as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they assert adds even more security when bought as a part of the package deal.When it pertains to weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 lbs of weight ability.

I’ve been utilizing the desk for about 3 weeks now for everyday job (and also complying with standing workdesk ideal methods), whether it’s keying out reviews similar to this one from our desktop computer or a laptop from time to time. The desk stands up well versus non-coastered beverages, and also the finish on top of the desk still really feels equally as smooth and glossy as the day I opened it in spite of days of perspiring wrists wresting on it and multiple clean downs with a cloth.

I never ever deliberately try to damage any kind of workdesks too hard, during some lighter examinations (tossing a collection of keys onto it from a range, for example), it still held up without as well several noticeable signs of damage.

When I measured the noise output of the desk while it rose from a resting position to standing as well as back again, it was by much the quietest we’ve examined. I might barely get it to make greater than about 9.5 dB of noise, so if your most significant problem is the whirr of your motor, this is definitely the one for you.

Client service

Now, typically I don’t include much concerning the customer service assistance of any kind of provided business, only since I really feel that generally if an item works the way its supposed to, I shouldn’t ever have a reason to call them to begin with. And also while I wish I could say that held true throughout my experience with StandDesk, I simply can not complete this testimonial without discussing the numerous, apparently unlimited problems I encountered attempting to get my desk put together.

For beginners, the desk I was sent really did not have any memory phone included initially, which meant I had no way of actually managing the up/down feature on the desk itself. I spoke to StandDesk about this concern, that got back to me around a day later on with an apology as well as a pledge that a brand-new one would be shipped quickly.

Standdesk evaluation handset

The resource of all our troubles …
Concerning 4 days later on a phone got here in the mail. The handset at first switched on, but it had not been long prior to I observed that none of the programmable buttons functioned, neither did the down switch, but also for some reason the “memory” button managed the down function just fine. I contacted the business again, as well as they excused the mixup and stated they would certainly have a new panel and control box bent on me within the week.

Over two weeks later my new panel and also control box got here. When I installed them both the desk ultimately started functioning the way it was meant to, but not after practically a month of waiting and also to and fro with a business that couldn’t remember to deliver a core component of their item inside the exact same box from the start.

Points to Take into consideration

Regardless of its bankable functions, this stand workdesk also has its very own drawbacks. Because no single stand desk can record every one of the features that you may need, you may take into consideration these in your decision-making.

Absence of a Crossbar as criterion

Not having a supporting bar is definitely not a deal-breaker, specifically thinking about some of our various other favorite workdesks such as the Fully Jarvis likewise don’t have one. In fact, this desk does have one if you want, however it is a paid add-on (much more on this later on too).

The bar is seen by some as a barrier, making it more challenging to put your legs easily listed below the desk. Others, on the other hand, find that they give included security, often vital when workdesks are fully extended.

We have not read any complaints of the stability of this workdesk, so we do not think its something to actually be concerned about, although if you actually wanted a desk with a bar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does use a separate add-on bar that you can add to the workdesk on your own, simply for an additional $49.95.


The security of a standing workdesk is among the most vital facets of these desks. Without a secure workdesk you’ll find it hard to concentrate, which could result in you becoming less interested in utilizing the desk at standing height. To get the best return on your financial investment, you’ll wish to be happy when using the desk.

Since the StandDesk Simple is the very first desk that I have examined with an optional cross assistance, I will certainly break down my stability examinations into 2 areas. Both examinations will certainly consist of the common front to back shaking examination as well as an entrusted to right wobble. The first will be without the cross support and the secondly will certainly be with it. Just to keep in mind, says that the enhancement of the cross support can enhance security by approximately 15%. I have no suggestion just how they generated that number.

Without Cross Assistance

Left to Right: The wobble examination was a various situation. StandDesk Simple was the second workdesk that I checked that tottered near the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the shaking motion was bad. Yet point it would certainly impact your work.

With Cross Support

Front to Back: Adding the cross assistance does not influence the shaking motion. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking motion was bad.

Entrusted to Right: Adding the cross assistance to the StandDesk enhanced the wobble activity for reduced heights. With the cross support the wobble motion didn’t begin until you got to 35″. By 39″ the wobble activity ended up being bad.

Keep in mind: It’s very important with flexible standing desks to fully tighten up all equipment. If there is hardware that is not entirely limited, the movement experienced when reached standing elevation will be exaggerated. This is particularly true with a workdesk framework that includes 32 screws, there are much too many points at which the desk has a chance to move.


Like all the Chinese bases we have actually tested in our labs, we have to narrow our recommendation on the StandDesk Pro to shorter individuals with narrower desktop computers, as the security simply isn’t there for a huge mass raised high off the ground. American-made workdesks will certainly be much better suited to these applications, and for a fairly obvious factor. Practically all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German companies that created this market, as well as their average citizens are a great deal taller than the average Eastern customer, so they began making longer-stroke lifting legs a long time ago. And also they have much more robotic automation, laser-cutting devices, and also large experience making standing workdesk bases, it goes without saying.

But if you’re not also high, do not have an excessive quantity of heavy equipment on your desktop computer, as well as do not need too wide of a desk, the StandDesk Pro will give you great bang for your buck.

All that may change with Yu’s assured StandDesk Pro 2.0 style that he anticipates to launch sometime in the future. Originally we were told we would certainly see it by June 2018. More than a year later on it has yet to appear, and Yu states he’s had difficulty getting the product quality he requires out of a number of Chinese factories he’s attempted collaborating with. The brand-new layout is supposedly going to be much easier to construct as well as have a heftier crossbar style, to name a few improvements. He states the new base will be supplied in both a “T-Leg” and also “C-Leg” setup, alleviating our issue concerning side-load emphasizing on the lifting columns.

If this new base ever involves market we’ll upgrade you right here. However we’re not holding our breath any longer as the most current information on the company is that Yu closed the tiny Los Angeles workplace as well as has actually moved it to accompany all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with excellent performance has actually been present via the new joint venture between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While restricted in dimension and shade alternatives, it has actually taken the mantle away from StandDesk’s long-ago condition as the very best standing workdesk under $400.

error: Content is protected !!