Are Standing Desk Good for You

The StandDesk was produced by millennials, is marketed right at millennials, and has been demolished by millennials in remarkable volumes. While it carries a ten-year service warranty (the lengthiest of any type of Chinese-made base), in this instance it’s not necessarily a trustworthy sign of the anticipated valuable life of the lifting columns. However, for the rate, the StandDesk is an excellent lower-cost choice to the UpLift, Jarvis and various other Chinese-made workdesks. Regardless of its stability problems this is a much better item than the Autonomous SmartDesk or IKEA Bekant could ever wish to be, and a good value on the whole. It’s the mid-priced offering in the broad category of Chinese-made workdesks that is gaining customers from both its less costly and also costlier peers.

StandDesk Building, Arrangement, and also Gizmos

Developing the desk is pretty straight forward if you adhere to the detailed instructions. All of the screws, screws, washing machines, and also springtime washers come in different bags that are noted with their location: tabletop, frame, as well as spares. There’s an included hex device for fastening every one of the bolts right into the frame, or, pop in a hex bit into your power device– just be careful not to over-tighten.

All of the parts have a top quality surface to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are attached to the leg setting up– it’s not going anywhere!


The foot setting up also consists of height-adjustable turning gears to support the front-to-back movement of the desk, which was extremely handy for the carpeted office flooring. I’m likewise making use of a flooring mat to shield the carpeting from chair wheel damages at sitting elevation, as well as push the chair back when I’m transitioning to standing height.


The deluxe controller was worth the investment. The switches are all variable stress programmed, implying the up and down arrowheads will change the height by 1/10th of an inch with a solitary press, or constantly readjust the elevation by around 0.7 inches per 2nd if you hold the switch for two secs. The memory switches are similar in style: push to recall the height setting, or hold the button down for 5 seconds to store a new height value. I’m using switch 1 for my resting position and also button 4 for my standing setting, which gives me 2 and also 3 for anything I may need in the future.


Using my Standdesk

I have actually been making use of the new desk for a couple of weeks as well as have documented my preliminary impressions:

The motors are quiet but can be listened to in the following area over. It takes possibly 25 secs for the desk to fully change from sitting to standing based on my presets.
I make use of an Ergotron side-by-side check arm (especially this LX version), causing the desk to get a little rocky when I shift my weight versus the key-board. In hindsight, I should have bought the crossbar upgrade for my workdesk after identifying the weight of my displays. If you prepare to do a dual monitor arrangement, obtain the crossbar.

Because gravity compresses the discs in a human spine, I require to increase the desk greater in the early morning as well as lower it in the evening.

An anti-fatigue floor covering is definitely necessary for long period of time standing. I purchased an Octagonal floor covering from SmartCells, using rubber “cells” that are pictured listed below.


Regardless of any kind of troubles I may have had with the mobile phone or the cookie-cutter design, pretty much every one of those problems washed away as soon as I in fact came down to utilizing this thing.

I didn’t assume it was even feasible, the StandDesk somehow takes care of to be even much more stable than the Jarvis, both at sitting as well as standing heights. Most days I like to run my Jarvis at max elevation while pushed versus my wall; not necessarily due to the fact that it’s that wobbly, yet just because I desire as much stability as I can obtain.

The StandDesk one ups the gambit even additionally, showing to be just as constant on its own at standing elevation as the Jarvis is with wall support. This is all without the business’s bar enhancement, which they claim adds much more stability when bought as a part of the package deal.When it comes to weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 pounds of weight ability.

I’ve been utilizing the desk for regarding 3 weeks currently for daily work (and also complying with standing desk ideal methods), whether it’s typing out evaluations like this one from our desktop computer or a laptop computer periodically. The desk holds up well versus non-coastered beverages, as well as the surface in addition to the desk still really feels just as smooth and slick as the day I opened it despite days of perspiring wrists wresting on it as well as several clean downs with a cloth.

I never ever purposefully attempt to dent any desks also hard, throughout some lighter tests (throwing a set of secrets onto it from a range, for example), it still held up without too numerous visible signs of damages.

When I gauged the noise outcome of the workdesk while it climbed from a sitting setting to standing and back once again, it was by much the quietest we have actually examined. I can barely get it to make more than about 9.5 dB of noise, so if your largest worry is the whirr of your electric motor, this is certainly the one for you.

Customer care

Now, usually I do not include much about the customer service support of any type of offered firm, only due to the fact that I really feel that generally if a product functions the method its supposed to, I should not ever before have a reason to call them in the first place. And also while I desire I can say that was the case during my experience with StandDesk, I merely can not finish this review without mentioning the countless, apparently countless issues I experienced attempting to get my desk assembled.

For starters, the desk I was sent out really did not have any memory phone included originally, which meant I had no chance of really regulating the up/down feature on the desk itself. I contacted StandDesk regarding this concern, who got back to me around a day later with an apology as well as a promise that a new one would certainly be shipped shortly.

Standdesk evaluation handset

The source of all our problems …
Regarding four days later on a mobile phone got here in the mail. The mobile phone originally switched on, but it had not been long before I saw that none of the programmable buttons functioned, neither did the down button, however, for some reason the “memory” button managed the down function simply great. I contacted the firm once again, as well as they apologized for the mixup and also claimed they would have a new panel and control box out to me within the week.

Over 2 weeks later on my new panel and also control box arrived. When I installed them both the desk ultimately began working the means it was intended to, yet not after virtually a month of waiting and also backward and forward with a company that could not bear in mind to deliver a core element of their item inside the exact same box from the outset.

Points to Consider

Regardless of its bankable functions, this stand workdesk likewise has its own drawbacks. Considering that no particular stand workdesk might record all of the features that you may need, you may consider these in your decision-making.

Lack of a Crossbar as standard

Not having a supporting crossbar is absolutely not a deal-breaker, especially considering some of our other favored desks such as the Completely Jarvis additionally don’t have one. This workdesk does have one if you desire, but it is a paid add-on (a lot more on this later on as well).

The crossbar is seen by some as a hindrance, making it more challenging to place your legs comfortably listed below the desk. Others, on the other hand, find that they offer added security, frequently critical when workdesks are completely extended.

We have not check out any kind of grievances of the security of this workdesk, so we don’t believe its something to truly be worried concerning, although if you truly desired a desk with a crossbar then we advise you have a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does offer a separate add-on crossbar that you can include in the desk on your own, just for an extra $49.95.


The security of a standing workdesk is among one of the most crucial elements of these desks. Without a stable workdesk you’ll discover it difficult to concentrate, which might lead to you coming to be much less interested in using the desk at standing height. To get the most effective return on your financial investment, you’ll wish to more than happy when using the desk.

Since the StandDesk Simple is the first workdesk that I have actually tested with an optional cross support, I will break down my stability tests into two sections. Both examinations will certainly consist of the typical front to back shaking test and an entrusted to right wobble. The very first will lack the cross support and the secondly will certainly be with it. Just to note, says that the enhancement of the cross support can increase stability by as much as 15%. I have no concept just how they came up with that number.

Without Cross Support

Left to Right: The wobble test was a various circumstance. StandDesk Simple was the second workdesk that I checked that wobbled at the bottom with weight on the desktop. The first was the IKEA Bekant. By the time it reached 36″ the shaking movement was bad. Beyond this factor it would influence your work.

With Cross Support

Front to Back: Adding the cross support does not impact the rocking movement. The StandDesk Simple began to experienced a shaking motion at 36″. By 41″ the rocking activity misbehaved.

Entrusted to Right: Adding the cross support to the StandDesk improved the wobble movement for reduced elevations. With the cross assistance the wobble motion didn’t begin until you got to 35″. By 39″ the wobble activity ended up being bad.

Keep in mind: It’s really important with flexible standing workdesks to totally tighten all hardware. If there is hardware that is not totally limited, the motion experienced when encompassed standing elevation will certainly be exaggerated. This is especially real with a workdesk framework that includes 32 screws, there are much way too many factors at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we have actually evaluated in our labs, we have to narrow our suggestion on the StandDesk Pro to much shorter customers with narrower desktops, as the stability just isn’t there for a huge mass raised high off the ground. American-made workdesks will be better matched to these applications, and for a fairly evident reason. Practically all American-made bases are made in US manufacturing facilities that are had by Swedish, Danish or German companies that created this industry, as well as their ordinary residents are a whole lot taller than the typical Oriental customer, so they started making longer-stroke training legs a very long time ago. And also they have even more robot automation, laser-cutting tools, and large experience making standing desk bases, obviously.

If you’re not also tall, don’t have an extreme quantity of hefty equipment on your desktop computer, and also do not require too vast of a workdesk, the StandDesk Pro will provide you good bang for your buck.

All that might alter with Yu’s promised StandDesk Pro 2.0 style that he expects to release at some point in the future. Initially we were informed we would certainly see it by June 2018. More than a year later it has yet to materialize, and Yu states he’s had trouble obtaining the product quality he needs out of a number of Chinese factories he’s tried working with. The brand-new design is apparently mosting likely to be a lot easier to assemble as well as have a heftier crossbar style, among other improvements. He says the brand-new base will be provided in both a “T-Leg” as well as “C-Leg” arrangement, minimizing our problem concerning side-load stressing on the training columns.

If this new base ever before concerns market we’ll update you below. But we’re not holding our breath any longer as one of the most current information on the business is that Yu shut the small Los Angeles workplace and has transferred it to accompany all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with impressive efficiency has been present through the brand-new joint endeavor between US-based iMovR and China-based Eureka, the i1 electric standing desk. While limited in dimension as well as shade alternatives, it has actually taken the mantle far from StandDesk’s long-ago status as the very best standing workdesk under $400.

error: Content is protected !!