Arm Monitor Mount

The StandDesk was created by millennials, is marketed directly at millennials, as well as has actually been demolished by millennials in excellent volumes. While it carries a ten-year guarantee (the lengthiest of any kind of Chinese-made base), in this case it’s not always a dependable sign of the expected valuable life of the training columns. But also for the cost, the StandDesk is a wonderful lower-cost choice to the UpLift, Jarvis and other Chinese-made workdesks. Regardless of its security concerns this is a much better item than the Autonomous SmartDesk or IKEA Bekant could ever before intend to be, as well as a good value in general. It’s the mid-priced offering in the wide classification of Chinese-made workdesks that is swaying customers from both its cheaper and more expensive peers.

StandDesk Building, Setup, and Gadgets

Developing the desk is rather simple if you comply with the thorough instructions. All of the screws, bolts, washing machines, as well as spring washers been available in different bags that are noted with their location: table top, framework, as well as spares. There’s a consisted of hex device for fastening all of the bolts into the structure, or, appear a hex bit into your power tool– just take care not to over-tighten.

All of the components have a high quality finish to them with rounded edges to prevent cut hands. Below is a shot of all the screws that are attached to the leg assembly– it’s not going anywhere!


The foot setting up likewise consists of height-adjustable turning equipments to stabilize the front-to-back motion of the desk, which was extremely useful for the carpeted home office floor. I’m also making use of a floor mat to protect the carpeting from chair wheel damage at resting elevation, and push the chair back when I’m transitioning to standing elevation.


The deluxe controller deserved the investment. The switches are all variable pressure set, indicating the up and down arrowheads will certainly change the height by 1/10th of an inch with a single press, or continuously adjust the elevation by around 0.7 inches per 2nd if you hold the button for two seconds. The memory switches are comparable in layout: push to recall the height setup, or hold the button down for 5 seconds to store a new height value. I’m using switch 1 for my resting position and also switch 4 for my standing position, which provides me 2 and 3 for anything I could require in the future.


Utilizing my Standdesk

I have actually been using the new desk for a couple of weeks and also have written down my initial perceptions:

The motors are quiet however can be heard in the next space over. It takes possibly 25 seconds for the desk to fully transition from sitting to standing based on my presets.
I use an Ergotron side-by-side keep track of arm (particularly this LX model), creating the desk to obtain a little rocky when I shift my weight against the key-board. In knowledge, I ought to have acquired the crossbar upgrade for my workdesk after establishing the weight of my screens. If you plan to do a twin display setup, obtain the crossbar.

Due to the fact that gravity compresses the discs in a human back, I require to elevate the desk higher in the early morning as well as reduced it in the evening.

An anti-fatigue mat is absolutely necessary for long period of time standing. I purchased an Octagonal floor covering from SmartCells, making use of rubber “cells” that are envisioned below.


Despite any type of problems I might have had with the phone or the cookie-cutter style, basically every one of those worries washed away as soon as I in fact got down to utilizing this point.

I didn’t assume it was even feasible, the StandDesk somehow takes care of to be even much more stable than the Jarvis, both at resting and also standing elevations. Many days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not necessarily due to the fact that it’s that wobbly, but just because I desire as much security as I can obtain.

The StandDesk one ups the gambit also further, showing to be equally as steady on its own at standing height as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they claim adds a lot more stability when bought as a part of the bundle deal.When it comes to weight resistance, the StandDesk shares yet even more statistics with the Jarvis, being rated for approximately 350 lbs of weight capacity.

I have actually been making use of the desk for about three weeks currently for day-to-day job (and complying with standing workdesk ideal methods), whether it’s keying out evaluations like this one from our desktop or a laptop every so often. The desk holds up well versus non-coastered beverages, and also the coating in addition to the desk still really feels just as smooth as well as slick as the day I opened it regardless of days of perspiring wrists wresting on it as well as multiple clean downs with a rag.

Though I never purposefully try to damage any type of workdesks as well hard, during some lighter tests (throwing a set of keys onto it from a distance, for example), it still held up without too many visible indicators of damage.

When I determined the sound result of the desk while it rose from a resting setting to standing as well as back once more, it was by much the quietest we have actually checked. I could hardly get it to make greater than about 9.5 dB of sound, so if your greatest concern is the whirr of your motor, this is certainly the one for you.

Customer support

Currently, typically I do not include much about the customer support assistance of any provided firm, just because I feel that generally if a product functions the method its supposed to, I shouldn’t ever before have a factor to call them to begin with. And also while I want I might say that held true during my experience with StandDesk, I just can’t finish this testimonial without pointing out the various, relatively limitless troubles I encountered trying to obtain my desk created.

For starters, the desk I was sent out didn’t have any type of memory mobile phone included initially, which implied I had no way of really controlling the up/down function on the desk itself. I spoke to StandDesk about this problem, who got back to me around a day later with an apology and an assurance that a brand-new one would be shipped soon.

Standdesk evaluation handset

The source of all our problems …
Concerning 4 days later a mobile arrived in the mail. The mobile phone originally activated, but it had not been long prior to I discovered that none of the programmable buttons worked, nor did the down switch, but also for some factor the “memory” switch dealt with the down function just fine. I spoke to the company once again, and also they excused the mixup and also said they would have a brand-new panel and also control box out to me within the week.

Over 2 weeks later my new panel and also control box got here. When I installed them both the desk lastly began working the means it was expected to, but not after nearly a month of waiting as well as to and fro with a firm that could not bear in mind to ship a core element of their product inside the exact same box from the get-go.

Points to Take into consideration

Despite its bankable attributes, this stand up workdesk additionally has its own drawbacks. Because no single stand workdesk could record all of the features that you might need, you may take into consideration these in your decision-making.

Absence of a Crossbar as standard

Not having a maintaining bar is certainly not a deal-breaker, particularly considering a few of our other favorite desks such as the Completely Jarvis additionally don’t have one. As a matter of fact, this workdesk does have one if you want, yet it is a paid add-on (much more on this later on as well).

The crossbar is seen by some as an obstacle, making it harder to put your legs conveniently below the desk. Others, on the other hand, find that they give added security, usually vital when desks are totally prolonged.

We have not check out any issues of the stability of this workdesk, so we do not think its something to truly be worried about, although if you actually desired a workdesk with a bar after that we suggest you have a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a different add-on crossbar that you can add to the workdesk yourself, simply for an additional $49.95.


The security of a standing workdesk is among one of the most important elements of these workdesks. Without a secure workdesk you’ll discover it tough to focus, which could cause you ending up being much less thinking about using the desk at standing elevation. To get the most effective return on your financial investment, you’ll intend to more than happy when making use of the desk.

Since the StandDesk Simple is the first desk that I have tested with an optional cross assistance, I will break down my security examinations into 2 areas. Both examinations will certainly include the common front to back shaking test and an entrusted to best wobble. The initial will be without the cross support as well as the second will be with it. Simply to note, claims that the addition of the cross support can increase stability by approximately 15%. I have no idea just how they developed that number.

Without Cross Assistance

Left to Right: The wobble examination was a various situation. StandDesk Simple was the 2nd desk that I examined that tottered near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the rocking activity misbehaved. Beyond this point it would affect your work.

With Cross Support

Front to Back: Including the cross support does not affect the shaking activity. The StandDesk Simple started to experienced a rocking activity at 36″. By 41″ the rocking movement misbehaved.

Left to Right: Adding the cross support to the StandDesk enhanced the wobble movement for lower elevations. With the cross support the wobble activity really did not begin up until you got to 35″. By 39″ the wobble motion ended up being bad.

Note: It’s really essential with adjustable standing workdesks to totally tighten up all hardware. If there is hardware that is not entirely limited, the movement experienced when reached standing height will be exaggerated. This is especially true with a workdesk frame that consists of 32 bolts, there are much a lot of factors at which the desk has a chance to relocate.


Like all the Chinese bases we’ve checked in our laboratories, we have to tighten our referral on the StandDesk Pro to shorter customers with narrower desktops, as the stability just isn’t there for a big mass raised high off the ground. American-made desks will certainly be much better matched to these applications, as well as for a fairly noticeable reason. Practically all American-made bases are made in US factories that are possessed by Swedish, Danish or German firms that designed this market, and also their typical citizens are a lot taller than the typical Oriental consumer, so they started making longer-stroke training legs a long period of time earlier. And also they have even more robot automation, laser-cutting tools, and sheer experience making standing desk bases, it goes without saying.

Yet if you’re not as well high, don’t have an excessive amount of heavy tools on your desktop, and don’t need also wide of a desk, the StandDesk Pro will certainly provide you great value.

All that could alter with Yu’s guaranteed StandDesk Pro 2.0 design that he anticipates to launch at some time in the future. Initially we were informed we ‘d see it by June 2018. Greater than a year later it has yet to materialize, as well as Yu states he’s had trouble getting the product top quality he needs out of a number of Chinese manufacturing facilities he’s attempted dealing with. The brand-new design is allegedly mosting likely to be much easier to put together and have a heftier bar design, among other improvements. He claims the brand-new base will be used in both a “T-Leg” and also “C-Leg” setup, relieving our issue concerning side-load stressing on the lifting columns.

If this new base ever before pertains to market we’ll update you below. However we’re not holding our breath any kind of longer as one of the most recent information on the firm is that Yu shut the small Los Angeles workplace as well as has actually transferred it to join with all its various other staff members in southeast Asia.

In the meantime, a new $399 standing desk with impressive efficiency has actually been present via the new joint venture between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in size and also shade choices, it has taken the mantle far from StandDesk’s long-ago status as the most effective standing workdesk under $400.

error: Content is protected !!