Arm Monitor

The StandDesk was developed by millennials, is marketed right at millennials, as well as has been demolished by millennials in impressive volumes. While it brings a ten-year warranty (the lengthiest of any Chinese-made base), in this situation it’s not always a trustworthy sign of the expected useful life of the training columns. For the rate, the StandDesk is an excellent lower-cost option to the UpLift, Jarvis and also various other Chinese-made workdesks. Despite its security issues this is a much better item than the Autonomous SmartDesk or IKEA Bekant can ever want to be, as well as a good value overall. It’s the mid-priced offering in the broad category of Chinese-made desks that is swaying customers from both its cheaper and also pricier peers.

StandDesk Construction, Arrangement, and Gizmos

Building the desk is pretty simple if you adhere to the detailed directions. All of the screws, screws, washers, as well as springtime washers can be found in separate bags that are noted with their destination: table top, structure, and spares. There’s an included hex tool for fastening all of the bolts right into the frame, or, appear a hex bit right into your power tool– just be careful not to over-tighten.

All of the parts have an excellent quality surface to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!


The foot assembly likewise includes height-adjustable turning gears to support the front-to-back activity of the desk, which was extremely useful for the carpeted office floor. I’m additionally making use of a floor mat to secure the rug from chair wheel damages at sitting elevation, as well as press the chair back when I’m transitioning to standing height.


The deluxe controller was worth the financial investment. The switches are all variable stress programmed, suggesting the up and down arrows will adjust the height by 1/10th of an inch with a single press, or constantly adjust the elevation by about 0.7 inches per 2nd if you hold the switch for 2 secs. The memory buttons are comparable in style: push to remember the elevation setting, or hold the button down for 5 seconds to save a brand-new height worth. I’m making use of button 1 for my resting placement and switch 4 for my standing placement, which gives me 2 and 3 for anything I might require in the future.


Utilizing my Standdesk

I’ve been making use of the brand-new desk for a few weeks and also have actually made a note of my initial perceptions:

The electric motors are quiet but can be heard in the following area over. It takes maybe 25 seconds for the desk to fully transition from resting to standing based upon my presets.
I make use of an Ergotron side-by-side keep track of arm (specifically this LX model), creating the desk to obtain a little rocky when I move my weight against the keyboard. In hindsight, I should have acquired the crossbar upgrade for my desk after identifying the weight of my monitors. If you plan to do a twin monitor configuration, get the bar.

Due to the fact that gravity compresses the discs in a human spinal column, I require to elevate the desk higher in the morning as well as lower it in the evening.

An anti-fatigue floor covering is absolutely essential for long duration standing. I acquired an Octagonal floor covering from SmartCells, using rubber “cells” that are imagined below.


In spite of any type of troubles I might have had with the phone or the cookie-cutter design, pretty much all of those concerns gotten rid of once I in fact came down to utilizing this thing.

Although I really did not assume it was even feasible, the StandDesk somehow handles to be even more steady than the Jarvis, both at sitting as well as standing heights. The majority of days I such as to run my Jarvis at max height while pressed against my wall; not necessarily due to the fact that it’s that shaky, however just because I want as much stability as I can obtain.

The StandDesk one ups the gambit also further, confirming to be just as constant on its own at standing height as the Jarvis is with wall support. This is all without the firm’s bar addition, which they assert includes a lot more stability when bought as a part of the package deal.When it pertains to weight tolerance, the StandDesk shares yet even more stats with the Jarvis, being ranked for as much as 350 lbs of weight capability.

I have actually been utilizing the desk for regarding three weeks currently for day-to-day job (as well as complying with standing workdesk finest techniques), whether it’s keying out evaluations such as this one from our desktop or a laptop computer once in a while. The desk stands up well versus non-coastered drinks, as well as the finish in addition to the desk still feels just as smooth and glossy as the day I opened it despite days of perspiring wrists wresting on it and also multiple clean downs with a cloth.

I never ever purposefully try to dent any workdesks too hard, throughout some lighter examinations (throwing a set of keys onto it from a range, for instance), it still held up without too many visible indicators of damages.

Finally, when I measured the noise output of the desk while it increased from a sitting position to standing as well as back again, it was by far the quietest we have actually tested yet. I can hardly get it to make more than regarding 9.5 dB of sound, so if your greatest concern is the whirr of your motor, this is most definitely the one for you.

Customer Service

Now, normally I don’t include much concerning the customer care assistance of any provided company, just due to the fact that I feel that as a whole if a product works the way its expected to, I should not ever have a reason to call them to begin with. As well as while I desire I might state that was the case during my experience with StandDesk, I simply can not complete this testimonial without stating the many, apparently endless troubles I ran into trying to get my workdesk put together.

For beginners, the desk I was sent out didn’t have any type of memory mobile phone included originally, which implied I had no chance of actually managing the up/down function on the desk itself. I called StandDesk regarding this issue, that got back to me around a day later on with an apology as well as an assurance that a new one would be shipped soon.

Standdesk review handset

The resource of all our troubles …
About 4 days later on a handset arrived in the mail. The mobile phone originally activated, however it wasn’t long before I noticed that none of the programmable switches functioned, nor did the down switch, but also for some reason the “memory” switch dealt with the down function just fine. I contacted the firm again, as well as they excused the mixup as well as claimed they would certainly have a brand-new panel and also control box bent on me within the week.

Over 2 weeks later my new panel as well as control box showed up. Once I mounted them both the desk finally began working the means it was intended to, yet not after practically a month of waiting and also to and fro with a firm that could not keep in mind to deliver a core part of their item inside the very same box from the outset.

Things to Consider

Despite its bankable attributes, this stand up desk additionally has its very own drawbacks. Since no particular stand workdesk can record all of the attributes that you might need, you might take into consideration these in your decision-making.

Lack of a Bar as criterion

Not having a supporting crossbar is certainly not a deal-breaker, specifically considering a few of our other favorite workdesks such as the Fully Jarvis additionally don’t have one. This desk does have one if you want, yet it is a paid add-on (much more on this later on as well).

The crossbar is seen by some as a hindrance, making it more difficult to place your legs easily below the desk. Others, on the other hand, find that they offer included stability, frequently critical when desks are fully expanded.

We have not review any type of complaints of the security of this workdesk, so we do not believe its something to really be worried about, although if you actually desired a workdesk with a bar then we recommend you have a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does supply a different add-on crossbar that you can include in the desk yourself, just for an extra $49.95.


The security of a standing workdesk is one of one of the most important facets of these desks. Without a stable desk you’ll discover it tough to concentrate, which could bring about you coming to be less curious about making use of the desk at standing elevation. To obtain the very best return on your financial investment, you’ll intend to be happy when making use of the desk.

Due To The Fact That the StandDesk Simple is the initial desk that I have checked with an optional cross support, I will break down my security tests into two areas. Both tests will include the common front to back shaking examination and also an entrusted to ideal wobble. The very first will certainly lack the cross assistance and the secondly will certainly be with it. Just to keep in mind, states that the enhancement of the cross support can boost security by up to 15%. I have no suggestion just how they created that number.

Without Cross Support

Left to Right: The wobble test was a different situation. StandDesk Simple was the second desk that I evaluated that tottered near the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it got to 36″ the shaking motion was bad. Yet point it would certainly affect your job.

With Cross Assistance

Front to Back: Adding the cross support does not influence the rocking movement. The StandDesk Simple started to experienced a rocking movement at 36″. By 41″ the rocking activity was bad.

Left to Right: Including the cross assistance to the StandDesk improved the wobble activity for lower elevations. With the cross support the wobble activity really did not begin until you reached 35″. By 39″ the wobble motion came to be poor.

Keep in mind: It’s extremely vital with adjustable standing workdesks to completely tighten all equipment. If there is equipment that is not completely tight, the activity experienced when reached standing height will be overemphasized. This is specifically real with a workdesk framework that includes 32 bolts, there are much way too many factors at which the desk has a possibility to relocate.


Like all the Chinese bases we’ve checked in our laboratories, we need to tighten our recommendation on the StandDesk Pro to shorter individuals with narrower desktops, as the security simply isn’t there for a big mass raised high off the ground. American-made workdesks will certainly be much better matched to these applications, and for a fairly apparent reason. Virtually all American-made bases are made in United States factories that are owned by Swedish, Danish or German companies that created this market, as well as their average citizens are a great deal taller than the average Eastern consumer, so they started making longer-stroke training legs a long period of time earlier. And they have even more robot automation, laser-cutting devices, and also sheer experience making standing workdesk bases, needless to say.

If you’re not as well high, don’t have an inordinate amount of hefty tools on your desktop computer, and also do not require also broad of a workdesk, the StandDesk Pro will certainly give you great bang for your buck.

All that may transform with Yu’s promised StandDesk Pro 2.0 layout that he expects to launch at some time in the future. Originally we were informed we would certainly see it by June 2018. More than a year later it has yet to materialize, and also Yu states he’s had difficulty obtaining the item top quality he requires out of numerous Chinese manufacturing facilities he’s attempted collaborating with. The new style is apparently going to be a lot easier to put together and also have a heftier bar layout, among other refinements. He says the new base will be used in both a “T-Leg” and also “C-Leg” setup, alleviating our worry concerning side-load emphasizing on the lifting columns.

If this brand-new base ever concerns market we’ll upgrade you here. However we’re not holding our breath any longer as one of the most recent information on the firm is that Yu shut the tiny Los Angeles workplace and has transferred it to accompany all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with impressive efficiency has been present through the new joint venture in between US-based iMovR and China-based Eureka, the i1 electric standing workdesk. While limited in dimension and color options, it has actually taken the mantle away from StandDesk’s long-ago standing as the most effective standing desk under $400.

error: Content is protected !!