Desk Monitor Stand

The StandDesk was produced by millennials, is marketed right at millennials, as well as has been gobbled up by millennials in remarkable quantities. While it lugs a ten-year service warranty (the longest of any type of Chinese-made base), in this case it’s not always a dependable indicator of the anticipated valuable life of the training columns. However, for the cost, the StandDesk is a wonderful lower-cost choice to the UpLift, Jarvis as well as other Chinese-made desks. In spite of its stability problems this is a much better item than the Autonomous SmartDesk or IKEA Bekant might ever want to be, as well as a good value generally. It’s the mid-priced offering in the broad classification of Chinese-made desks that is winning over clients from both its less expensive as well as pricier peers.

StandDesk Building, Setup, and also Gadgets

Building the desk is pretty simple if you follow the thorough guidelines. Every one of the screws, bolts, washers, and springtime washers can be found in different bags that are marked with their destination: tabletop, structure, as well as spares. There’s a consisted of hex device for fastening all of the bolts right into the frame, or, appear a hex bit right into your power tool– just take care not to over-tighten.

All of the components have a premium quality finish to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are secured to the leg setting up– it’s not going anywhere!


The foot assembly additionally consists of height-adjustable turning gears to maintain the front-to-back movement of the desk, which was very useful for the carpeted office floor. I’m likewise making use of a flooring mat to secure the rug from chair wheel damages at resting height, and also press the chair back when I’m transitioning to standing height.


The deluxe controller was worth the financial investment. The switches are all variable pressure programmed, implying the up and down arrows will adjust the elevation by 1/10th of an inch with a solitary press, or continually adjust the elevation by around 0.7 inches per 2nd if you hold the switch for 2 secs. The memory buttons are similar in style: push to remember the height setting, or hold the button down for 5 secs to store a new elevation worth. I’m making use of button 1 for my resting placement and also button 4 for my standing setting, which offers me 2 and also 3 for anything I could require in the future.


Utilizing my Standdesk

I’ve been making use of the brand-new desk for a couple of weeks as well as have made a note of my preliminary impressions:

The motors are quiet yet can be heard in the following area over. It takes probably 25 seconds for the desk to fully shift from sitting to standing based upon my presets.
I utilize an Ergotron side-by-side monitor arm (specifically this LX model), triggering the desk to get a little rocky when I shift my weight against the key-board. In hindsight, I need to have purchased the bar upgrade for my desk after determining the weight of my displays. If you prepare to do a dual display arrangement, obtain the crossbar.

Due to the fact that gravity compresses the discs in a human spine, I need to raise the desk higher in the morning and also reduced it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I bought an Octagonal mat from SmartCells, making use of rubber “cells” that are imagined below.


In spite of any type of issues I might have had with the phone or the cookie-cutter style, virtually all of those issues removed once I really came down to using this point.

Although I really did not believe it was also feasible, the StandDesk somehow handles to be even more steady than the Jarvis, both at resting and also standing heights. The majority of days I such as to run my Jarvis at max elevation while pushed versus my wall surface; not always since it’s that shaky, however just because I want as much security as I can obtain.

The StandDesk one ups the gambit even further, verifying to be equally as stable on its own at standing height as the Jarvis is with wall support. This is all without the firm’s bar enhancement, which they declare adds even more security when purchased as a part of the bundle deal.When it pertains to weight resistance, the StandDesk shares yet much more statistics with the Jarvis, being rated for approximately 350 lbs of weight ability.

I’ve been using the desk for concerning three weeks now for everyday job (and also adhering to standing workdesk best methods), whether it’s keying out evaluations similar to this one from our desktop or a laptop every now and then. The desk stands up well versus non-coastered drinks, and the coating on top of the desk still feels just as smooth and slick as the day I opened it despite days of perspiring wrists wresting on it as well as numerous clean downs with a dustcloth.

I never purposefully try to dent any kind of desks as well hard, throughout some lighter tests (throwing a set of tricks onto it from a range, for example), it still held up without too many noticeable indicators of damages.

When I gauged the noise output of the workdesk while it increased from a resting setting to standing and back once again, it was by much the quietest we have actually examined. I could barely get it to make greater than concerning 9.5 dB of noise, so if your largest concern is the whirr of your motor, this is definitely the one for you.

Customer care

Now, normally I do not include much about the client service support of any type of provided firm, only due to the fact that I really feel that generally if a product functions the way its expected to, I shouldn’t ever have a factor to call them in the first place. As well as while I desire I can claim that was the case during my experience with StandDesk, I just can’t complete this evaluation without stating the various, relatively countless troubles I came across trying to obtain my workdesk created.

For starters, the desk I was sent out really did not have any memory mobile included initially, which indicated I had no way of actually controlling the up/down function on the desk itself. I contacted StandDesk concerning this concern, that returned to me around a day later on with an apology and an assurance that a brand-new one would certainly be shipped out soon.

Standdesk testimonial handset

The source of all our issues …
About 4 days later on a phone got here in the mail. The mobile phone initially activated, yet it wasn’t long prior to I saw that none of the programmable switches functioned, nor did the down switch, however, for some factor the “memory” button managed the down function just great. I spoke to the business once again, as well as they apologized for the mixup and stated they would have a brand-new panel as well as control box out to me within the week.

Over two weeks later on my brand-new panel and control box showed up. As soon as I installed them both the desk finally began working the way it was intended to, yet not after nearly a month of waiting and back and forth with a business that couldn’t bear in mind to deliver a core component of their product inside the very same box from the outset.

Things to Think about

Regardless of its bankable functions, this stand desk also has its own downsides. Because no singular stand workdesk could record every one of the features that you might require, you may take into consideration these in your decision-making.

Lack of a Crossbar as requirement

Not having a maintaining crossbar is certainly not a deal-breaker, especially thinking about some of our other favored workdesks such as the Fully Jarvis additionally don’t have one. In fact, this desk does have one if you want, however it is a paid add-on (much more on this later as well).

The crossbar is seen by some as a hindrance, making it more challenging to place your legs conveniently listed below the desk. Others, on the other hand, discover that they give added stability, usually vital when workdesks are totally expanded.

We have not check out any grievances of the stability of this workdesk, so we do not think its something to actually be concerned concerning, although if you truly desired a workdesk with a bar after that we advise you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does provide a different add-on bar that you can contribute to the desk on your own, just for an added $49.95.


The security of a standing workdesk is one of one of the most essential elements of these desks. Without a stable workdesk you’ll locate it difficult to concentrate, which might cause you becoming less curious about using the desk at standing height. To obtain the best return on your investment, you’ll intend to enjoy when making use of the desk.

Since the StandDesk Simple is the very first desk that I have tested with an optional cross support, I will break down my stability tests right into 2 areas. Both tests will certainly include the regular front to back shaking test as well as a left to best wobble. The very first will certainly be without the cross support and the second will be with it. Just to note, StandDesk.co claims that the addition of the cross support can boost security by up to 15%. I have no idea just how they thought of that number.

Without Cross Assistance

Left to Right: The wobble test was a various scenario. StandDesk Simple was the 2nd workdesk that I tested that wobbled near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the rocking activity misbehaved. Beyond this point it would affect your work.

With Cross Assistance

Front to Back: Including the cross assistance does not influence the rocking activity. The StandDesk Simple started to experienced a rocking activity at 36″. By 41″ the rocking activity misbehaved.

Delegated Right: Adding the cross support to the StandDesk enhanced the wobble movement for reduced heights. With the cross support the wobble movement really did not begin till you reached 35″. By 39″ the wobble activity came to be poor.

Note: It’s really essential with flexible standing desks to fully tighten up all hardware. If there is hardware that is not completely tight, the motion experienced when reached standing height will be exaggerated. This is particularly real with a workdesk structure that includes 32 bolts, there are far a lot of points at which the desk has an opportunity to move.

Final thought

Like all the Chinese bases we’ve evaluated in our laboratories, we need to tighten our referral on the StandDesk Pro to much shorter customers with narrower desktop computers, as the stability simply isn’t there for a big mass boosted high off the ground. American-made desks will be better fit to these applications, and also for a rather obvious factor. Virtually all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German business that created this sector, and also their average citizens are a great deal taller than the ordinary Oriental customer, so they began making longer-stroke lifting legs a long time earlier. And also they have much more robot automation, laser-cutting devices, and also sheer experience making standing desk bases, obviously.

If you’re not as well tall, do not have an extreme quantity of heavy tools on your desktop computer, as well as do not need too broad of a desk, the StandDesk Pro will certainly give you great bang for your buck.

All that may alter with Yu’s guaranteed StandDesk Pro 2.0 design that he expects to launch at some point in the future. Initially we were told we ‘d see it by June 2018. More than a year later it has yet to emerge, and also Yu states he’s had difficulty obtaining the product quality he needs out of a number of Chinese factories he’s attempted dealing with. The new design is supposedly mosting likely to be a lot easier to assemble and have a heftier bar design, among other refinements. He says the new base will certainly be provided in both a “T-Leg” as well as “C-Leg” arrangement, easing our issue about side-load emphasizing on the training columns.

If this new base ever before comes to market we’ll upgrade you below. We’re not holding our breath any type of longer as the most recent news on the company is that Yu closed the little Los Angeles workplace and also has actually moved it to join with all its various other staff members in southeast Asia.

In the meantime, a new $399 standing desk with outstanding performance has actually been present via the new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electrical standing desk. While restricted in size and also shade options, it has actually taken the mantle away from StandDesk’s long-ago standing as the most effective standing workdesk under $400.

Categories ST3
error: Content is protected !!