The StandDesk was created by millennials, is marketed right at millennials, and has been gobbled up by millennials in impressive volumes. While it carries a ten-year service warranty (the longest of any type of Chinese-made base), in this case it’s not always a reputable indicator of the expected useful life of the lifting columns. But also for the price, the StandDesk is a fantastic lower-cost option to the UpLift, Jarvis and various other Chinese-made desks. Despite its stability issues this is a far much better item than the Autonomous SmartDesk or IKEA Bekant could ever want to be, and also a good value on the whole. It’s the mid-priced offering in the wide classification of Chinese-made desks that is winning over consumers from both its more affordable as well as pricier peers.

StandDesk Building, Configuration, as well as Gadgets

Developing the desk is rather straight forward if you adhere to the comprehensive guidelines. All of the screws, screws, washing machines, as well as spring washers can be found in different bags that are noted with their destination: table top, structure, and spares. There’s a consisted of hex device for securing every one of the screws into the frame, or, appear a hex bit into your power tool– simply beware not to over-tighten.

All of the parts have a premium quality finish to them with rounded corners to prevent cut hands. Below is a shot of all the bolts that are secured to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot assembly additionally includes height-adjustable turning gears to support the front-to-back motion of the desk, which was very useful for the carpeted home office floor. I’m additionally making use of a floor mat to secure the rug from chair wheel damage at sitting height, and also press the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The luxurious controller deserved the investment. The buttons are all variable pressure set, indicating the backwards and forwards arrows will certainly change the elevation by 1/10th of an inch with a solitary press, or constantly readjust the height by about 0.7 inches per 2nd if you hold the switch for 2 seconds. The memory switches are comparable in design: push to remember the elevation setup, or hold the button down for five secs to save a new height value. I’m utilizing switch 1 for my sitting placement and button 4 for my standing placement, which provides me 2 and 3 for anything I might require in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I’ve been using the new workdesk for a few weeks as well as have written down my preliminary impacts:

The motors are quiet however can be listened to in the following space over. It takes probably 25 seconds for the desk to totally change from sitting to standing based upon my presets.
I use an Ergotron side-by-side keep an eye on arm (particularly this LX design), causing the desk to obtain a little rocky when I change my weight versus the keyboard. In hindsight, I must have acquired the crossbar upgrade for my workdesk after determining the weight of my monitors. If you intend to do a dual display arrangement, get the bar.

Because gravity compresses the discs in a human back, I require to elevate the desk greater in the early morning and lower it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I bought an Octagonal floor covering from SmartCells, making use of rubber “cells” that are pictured listed below.

Performance

Regardless of any kind of troubles I may have had with the phone or the cookie-cutter design, pretty much all of those concerns washed away as soon as I in fact got down to utilizing this point.

I didn’t assume it was even possible, the StandDesk in some way handles to be also much more steady than the Jarvis, both at sitting as well as standing heights. A lot of days I like to run my Jarvis at max height while pressed against my wall surface; not always due to the fact that it’s that unsteady, yet just because I want as much stability as I can get.

The StandDesk one ups the gambit even additionally, confirming to be just as consistent by itself at standing height as the Jarvis is with wall support. This is all without the business’s bar enhancement, which they assert includes even more security when acquired as a part of the bundle deal.When it involves weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 pounds of weight capacity.

I’ve been making use of the desk for concerning three weeks now for day-to-day job (and also adhering to standing desk best techniques), whether it’s typing out evaluations similar to this one from our desktop or a laptop computer from time to time. The desk holds up well against non-coastered beverages, and also the finish on top of the desk still really feels equally as smooth and slick as the day I opened it despite days of sweaty wrists wresting on it as well as several clean downs with a cloth.

Though I never ever intentionally attempt to damage any type of workdesks as well hard, throughout some lighter tests (throwing a collection of keys onto it from a distance, as an example), it still held up without a lot of noticeable signs of damages.

When I measured the sound result of the desk while it climbed from a resting placement to standing and back once more, it was by much the quietest we’ve checked. I could hardly get it to make more than concerning 9.5 dB of noise, so if your most significant problem is the whirr of your electric motor, this is certainly the one for you.

Customer care

Now, normally I don’t include much regarding the customer support support of any given firm, only because I feel that as a whole if an item functions the means its meant to, I shouldn’t ever have a factor to call them to begin with. And while I want I could state that was the case during my experience with StandDesk, I just can not complete this testimonial without discussing the countless, relatively endless troubles I ran into trying to obtain my workdesk assembled.

For beginners, the desk I was sent out really did not have any memory handset consisted of originally, which indicated I had no way of actually regulating the up/down feature on the desk itself. I spoke to StandDesk concerning this concern, who got back to me around a day later with an apology and a promise that a brand-new one would be shipped shortly.

Standdesk review handset

The resource of all our troubles …
Regarding 4 days later a mobile phone got here in the mail. The mobile originally activated, however it had not been long prior to I saw that none of the programmable buttons functioned, nor did the down switch, but for some reason the “memory” switch took care of the down feature simply great. I called the business once more, and they excused the mixup and also claimed they would have a brand-new panel as well as control box bent on me within the week.

Over two weeks later my brand-new panel and control box got here. When I installed them both the desk lastly began working the means it was intended to, but not after practically a month of waiting and back and forth with a business that could not bear in mind to deliver a core element of their item inside the same box from the outset.

Points to Think about

In spite of its bankable attributes, this stand workdesk also has its own disadvantages. Considering that no single stand workdesk could record every one of the attributes that you might require, you may consider these in your decision-making.

Lack of a Crossbar as criterion

Not having a maintaining crossbar is absolutely not a deal-breaker, specifically thinking about some of our other preferred workdesks such as the Fully Jarvis also don’t have one. This desk does have one if you desire, however it is a paid add-on (extra on this later on too).

The crossbar is seen by some as a hindrance, making it more difficult to position your legs pleasantly below the desk. Others, on the other hand, find that they provide included stability, typically vital when workdesks are completely prolonged.

We have not check out any problems of the security of this desk, so we don’t assume its something to truly be concerned concerning, although if you actually wanted a workdesk with a crossbar after that we suggest you have a look at the Varidesk ProDesk 60 Electric.

Conversely, StandDesk does provide a different add-on bar that you can add to the desk on your own, just for an extra $49.95.

Stability

The stability of a standing desk is one of the most important aspects of these workdesks. Without a stable workdesk you’ll locate it hard to focus, which might cause you ending up being much less thinking about using the desk at standing elevation. To get the very best return on your financial investment, you’ll want to be happy when utilizing the desk.

Due To The Fact That the StandDesk Simple is the very first desk that I have actually checked with an optional cross support, I will break down my security tests into 2 sections. Both examinations will certainly consist of the typical front to back shaking test and an entrusted to best wobble. The initial will lack the cross support and also the secondly will certainly be with it. Simply to note, StandDesk.co says that the enhancement of the cross assistance can raise stability by approximately 15%. I have no suggestion how they generated that number.

Without Cross Support

Left to Right: The wobble examination was a various situation. StandDesk Simple was the 2nd desk that I checked that tottered at the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the rocking activity misbehaved. Yet factor it would certainly impact your job.

With Cross Assistance

Front to Back: Including the cross support does not impact the rocking activity. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking motion was bad.

Left to Right: Adding the cross assistance to the StandDesk boosted the wobble activity for lower heights. With the cross support the wobble motion really did not start up until you got to 35″. By 39″ the wobble activity ended up being poor.

Note: It’s very crucial with adjustable standing workdesks to totally tighten up all hardware. If there is equipment that is not totally tight, the activity experienced when included standing height will be exaggerated. This is specifically true with a desk structure that consists of 32 screws, there are much way too many points at which the desk has an opportunity to move.

Conclusion

Like all the Chinese bases we’ve evaluated in our labs, we have to narrow our recommendation on the StandDesk Pro to much shorter customers with narrower desktop computers, as the security just isn’t there for a big mass elevated high off the ground. American-made desks will certainly be much better suited to these applications, and also for a relatively apparent reason. Essentially all American-made bases are made in United States factories that are had by Swedish, Danish or German firms that invented this sector, and also their ordinary citizens are a great deal taller than the ordinary Asian customer, so they began making longer-stroke lifting legs a very long time earlier. And also they have even more robot automation, laser-cutting devices, and large experience making standing desk bases, it goes without saying.

If you’re not too high, don’t have an extreme amount of hefty equipment on your desktop, and also do not require too wide of a desk, the StandDesk Pro will offer you excellent bang for your buck.

All that may transform with Yu’s guaranteed StandDesk Pro 2.0 layout that he anticipates to launch sometime in the future. Originally we were informed we ‘d see it by June 2018. More than a year later it has yet to appear, and Yu states he’s had trouble getting the product quality he requires out of numerous Chinese manufacturing facilities he’s attempted collaborating with. The new style is supposedly mosting likely to be a lot easier to put together and also have a heftier crossbar layout, among other improvements. He says the new base will certainly be used in both a “T-Leg” as well as “C-Leg” configuration, relieving our issue about side-load stressing on the lifting columns.

If this brand-new base ever before pertains to market we’ll upgrade you right here. We’re not holding our breath any kind of longer as the most current information on the firm is that Yu shut the little Los Angeles office as well as has actually transferred it to join with all its other workers in southeast Asia.

In the meantime, a new $399 standing desk with impressive performance has been present via the new joint venture between US-based iMovR and China-based Eureka, the i1 electrical standing desk. While limited in size and also shade options, it has taken the mantle away from StandDesk’s long-ago standing as the most effective standing workdesk under $400.

The StandDesk was created by millennials, is marketed straight at millennials, as well as has actually been demolished by millennials in excellent quantities. While it lugs a ten-year guarantee (the longest of any kind of Chinese-made base), in this case it’s not always a reputable indication of the expected valuable life of the lifting columns. But for the rate, the StandDesk is a great lower-cost choice to the UpLift, Jarvis as well as various other Chinese-made desks. Despite its stability problems this is a much much better item than the Autonomous SmartDesk or IKEA Bekant might ever before wish to be, as well as a good value on the whole. It’s the mid-priced offering in the broad group of Chinese-made desks that is gaining clients from both its less costly and pricier peers.

StandDesk Construction, Configuration, as well as Devices

Developing the desk is rather simple if you follow the thorough guidelines. Every one of the screws, bolts, washing machines, and spring washing machines been available in separate bags that are marked with their location: tabletop, framework, as well as spares. There’s an included hex device for fastening every one of the bolts into the structure, or, pop in a hex little bit right into your power device– simply beware not to over-tighten.

Every one of the components have a high quality surface to them with rounded corners to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!

Standdesk-Leg

The foot setting up likewise includes height-adjustable turning equipments to stabilize the front-to-back activity of the desk, which was very useful for the carpeted office floor. I’m likewise using a floor mat to secure the rug from chair wheel damage at resting height, and push the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller deserved the financial investment. The buttons are all variable stress set, indicating the backwards and forwards arrows will change the height by 1/10th of an inch with a single press, or constantly adjust the elevation by around 0.7 inches per 2nd if you hold the switch for 2 seconds. The memory switches are similar in style: push to remember the height setting, or hold the button down for five secs to keep a new elevation value. I’m making use of switch 1 for my sitting placement as well as switch 4 for my standing setting, which offers me 2 and 3 for anything I could require in the future.

Standdesk-Memory-unit

Using my Standdesk

I’ve been utilizing the brand-new workdesk for a couple of weeks and also have written down my preliminary impacts:

The electric motors are quiet however can be heard in the next area over. It takes maybe 25 seconds for the desk to fully transition from sitting to standing based on my presets.
I make use of an Ergotron side-by-side keep track of arm (particularly this LX model), causing the desk to get a little rocky when I move my weight versus the key-board. In knowledge, I ought to have bought the bar upgrade for my desk after determining the weight of my monitors. If you intend to do a twin display configuration, get the crossbar.

Due to the fact that gravity compresses the discs in a human spinal column, I require to raise the desk higher in the morning and also reduced it at night.

An anti-fatigue floor covering is definitely crucial for long duration standing. I bought an Octagonal mat from SmartCells, making use of rubber “cells” that are envisioned below.

Efficiency

In spite of any issues I might have had with the phone or the cookie-cutter style, virtually all of those issues removed as soon as I really got down to utilizing this thing.

I didn’t assume it was even possible, the StandDesk in some way handles to be also a lot more stable than the Jarvis, both at resting as well as standing heights. Many days I such as to run my Jarvis at max height while pushed against my wall surface; not always due to the fact that it’s that wobbly, however even if I want as much security as I can obtain.

The StandDesk one ups the gambit even better, confirming to be equally as constant by itself at standing elevation as the Jarvis is with wall support. This is all without the company’s bar enhancement, which they declare adds a lot more stability when acquired as a part of the package deal.When it involves weight resistance, the StandDesk shares yet even more stats with the Jarvis, being rated for approximately 350 pounds of weight capacity.

I have actually been utilizing the desk for about three weeks now for daily work (and also following standing workdesk ideal practices), whether it’s keying out reviews like this one from our desktop computer or a laptop computer periodically. The desk holds up well against non-coastered drinks, and also the surface in addition to the desk still feels equally as smooth and also glossy as the day I opened it despite days of perspiring wrists wresting on it and multiple clean downs with a cloth.

Though I never ever purposefully try to damage any workdesks too hard, throughout some lighter examinations (throwing a set of tricks onto it from a range, for instance), it still stood up without too many noticeable indicators of damages.

When I gauged the noise result of the desk while it climbed from a resting position to standing and also back once more, it was by much the quietest we have actually checked. I could hardly get it to make greater than about 9.5 dB of noise, so if your most significant worry is the whirr of your electric motor, this is most definitely the one for you.

Customer care

Now, usually I don’t consist of much about the customer service assistance of any kind of offered business, only since I feel that as a whole if a product functions the method its intended to, I should not ever have a factor to call them to begin with. And while I desire I can say that was the case during my experience with StandDesk, I merely can not finish this review without mentioning the various, apparently countless issues I came across trying to get my workdesk put together.

For beginners, the desk I was sent didn’t have any kind of memory handset consisted of initially, which implied I had no way of in fact controlling the up/down feature on the desk itself. I spoke to StandDesk concerning this concern, who got back to me around a day later on with an apology and also a promise that a new one would certainly be shipped shortly.

Standdesk review handset

The resource of all our issues …
About four days later a mobile phone showed up in the mail. The mobile phone initially turned on, but it had not been long prior to I saw that none of the programmable buttons worked, nor did the down switch, but also for some reason the “memory” button dealt with the down function simply fine. I contacted the company once again, as well as they excused the mixup as well as stated they would certainly have a brand-new panel as well as control box bent on me within the week.

Over 2 weeks later on my new panel and also control box got here. Once I installed them both the desk lastly started functioning the way it was expected to, however not after practically a month of waiting and to and fro with a company that could not keep in mind to deliver a core element of their item inside the exact same box from the beginning.

Things to Think about

In spite of its bankable functions, this stand up workdesk also has its very own downsides. Because no particular stand workdesk could capture all of the features that you might require, you might take into consideration these in your decision-making.

Absence of a Crossbar as standard

Not having a supporting crossbar is definitely not a deal-breaker, specifically taking into consideration several of our other favorite workdesks such as the Completely Jarvis additionally don’t have one. Actually, this workdesk does have one if you desire, but it is a paid add-on (more on this later as well).

The crossbar is seen by some as a limitation, making it harder to put your legs conveniently listed below the desk. Others, on the other hand, locate that they offer added stability, often critical when workdesks are fully prolonged.

We have not read any type of problems of the stability of this workdesk, so we do not believe its something to truly be worried concerning, although if you really wanted a workdesk with a bar then we advise you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does supply a separate add-on bar that you can include in the desk on your own, just for an added $49.95.

Security

The stability of a standing workdesk is just one of the most important aspects of these desks. Without a stable desk you’ll find it tough to concentrate, which can lead to you coming to be less curious about utilizing the desk at standing elevation. To get the very best return on your financial investment, you’ll want to enjoy when using the desk.

Due To The Fact That the StandDesk Simple is the very first desk that I have actually tested with an optional cross assistance, I will certainly break down my stability tests into two areas. Both examinations will certainly include the typical front to back shaking test and also a delegated appropriate wobble. The initial will certainly be without the cross support and also the secondly will certainly be with it. Just to note, StandDesk.co states that the enhancement of the cross support can increase security by up to 15%. I have no concept how they thought of that number.

Without Cross Assistance

Left to Right: The wobble examination was a various situation. StandDesk Simple was the second workdesk that I checked that wobbled at the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the rocking activity was bad. Beyond this point it would certainly impact your job.

With Cross Assistance

Front to Back: Including the cross assistance does not impact the shaking movement. The StandDesk Simple began to experienced a shaking activity at 36″. By 41″ the shaking activity was bad.

Delegated Right: Including the cross assistance to the StandDesk boosted the wobble motion for reduced heights. With the cross assistance the wobble motion really did not start until you reached 35″. By 39″ the wobble activity ended up being bad.

Note: It’s extremely essential with flexible standing desks to completely tighten up all equipment. If there is hardware that is not totally tight, the movement experienced when included standing elevation will be exaggerated. This is especially true with a desk structure that consists of 32 bolts, there are far too many points at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we have actually examined in our labs, we have to narrow our suggestion on the StandDesk Pro to shorter customers with narrower desktops, as the security simply isn’t there for a large mass raised high off the ground. American-made workdesks will certainly be better fit to these applications, and for a fairly noticeable factor. Virtually all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German companies that designed this market, and their ordinary people are a whole lot taller than the ordinary Oriental consumer, so they started making longer-stroke lifting legs a very long time earlier. As well as they have much more robot automation, laser-cutting devices, and also large experience making standing desk bases, obviously.

However if you’re not too high, do not have an extreme quantity of hefty equipment on your desktop, and do not need also wide of a desk, the StandDesk Pro will certainly give you excellent value.

All that may change with Yu’s assured StandDesk Pro 2.0 layout that he expects to release sometime in the future. Initially we were told we ‘d see it by June 2018. More than a year later on it has yet to emerge, as well as Yu states he’s had difficulty getting the item high quality he requires out of numerous Chinese factories he’s attempted working with. The brand-new layout is apparently mosting likely to be much easier to put together as well as have a heftier bar design, among other improvements. He claims the brand-new base will be provided in both a “T-Leg” and also “C-Leg” configuration, reducing our concern regarding side-load stressing on the lifting columns.

If this brand-new base ever pertains to market we’ll upgrade you here. We’re not holding our breath any type of longer as the most recent news on the company is that Yu closed the little Los Angeles office and also has moved it to join with all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing desk with excellent performance has actually been present via the new joint venture in between US-based iMovR and China-based Eureka, the i1 electrical standing workdesk. While limited in dimension and also shade options, it has actually taken the mantle far from StandDesk’s long-ago standing as the best standing workdesk under $400.