The StandDesk was produced by millennials, is marketed right at millennials, and has been demolished by millennials in excellent quantities. While it brings a ten-year warranty (the longest of any kind of Chinese-made base), in this situation it’s not always a trustworthy sign of the anticipated helpful life of the lifting columns. For the cost, the StandDesk is an excellent lower-cost alternative to the UpLift, Jarvis and also various other Chinese-made workdesks. In spite of its security issues this is a far much better item than the Autonomous SmartDesk or IKEA Bekant might ever hope to be, and also a good value in general. It’s the mid-priced offering in the wide category of Chinese-made workdesks that is gaining clients from both its more affordable as well as more expensive peers.

StandDesk Construction, Configuration, and Devices

Constructing the desk is rather simple if you comply with the detailed directions. Every one of the screws, bolts, washers, and spring washing machines been available in different bags that are marked with their location: table top, structure, and spares. There’s a consisted of hex tool for fastening every one of the screws into the frame, or, pop in a hex little bit into your power device– just beware not to over-tighten.

All of the parts have a premium quality surface to them with rounded corners to avoid cut hands. Below is a shot of all the bolts that are attached to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot setting up likewise consists of height-adjustable rotation equipments to support the front-to-back motion of the desk, which was extremely helpful for the carpeted office flooring. I’m likewise using a flooring mat to safeguard the carpet from chair wheel damage at resting height, and push the chair back when I’m transitioning to standing height.

Standdesk-Foot

The luxurious controller was worth the financial investment. The switches are all variable stress set, implying the backwards and forwards arrows will change the elevation by 1/10th of an inch with a solitary press, or constantly readjust the elevation by around 0.7 inches per 2nd if you hold the button for two secs. The memory buttons are comparable in layout: push to remember the height setup, or hold the button down for five seconds to keep a brand-new height worth. I’m utilizing button 1 for my resting placement as well as switch 4 for my standing position, which provides me 2 as well as 3 for anything I could need in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I’ve been utilizing the brand-new desk for a few weeks as well as have listed my initial impacts:

The motors are quiet but can be heard in the next space over. It takes perhaps 25 seconds for the desk to totally change from resting to standing based upon my presets.
I use an Ergotron side-by-side monitor arm (especially this LX version), causing the desk to get a little rocky when I move my weight against the key-board. In hindsight, I ought to have acquired the bar upgrade for my workdesk after identifying the weight of my screens. If you prepare to do a double screen setup, get the bar.

Since gravity presses the discs in a human spinal column, I need to raise the desk higher in the early morning and also lower it at night.

An anti-fatigue floor covering is absolutely essential for long duration standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are pictured below.

Performance

Regardless of any issues I may have had with the phone or the cookie-cutter layout, practically every one of those issues washed away as soon as I really came down to utilizing this point.

Although I didn’t think it was even possible, the StandDesk somehow manages to be even more secure than the Jarvis, both at sitting as well as standing heights. Most days I like to run my Jarvis at max height while pressed against my wall surface; not necessarily because it’s that unsteady, yet even if I want as much stability as I can get.

The StandDesk one ups the gambit even additionally, verifying to be equally as consistent on its own at standing height as the Jarvis is with wall support. This is all without the company’s bar addition, which they declare includes even more stability when purchased as a part of the plan deal.When it comes to weight tolerance, the StandDesk shares yet even more stats with the Jarvis, being ranked for approximately 350 lbs of weight ability.

I have actually been using the desk for concerning 3 weeks currently for daily job (and adhering to standing workdesk best methods), whether it’s typing out testimonials similar to this one from our desktop computer or a laptop from time to time. The desk holds up well versus non-coastered beverages, and also the finish in addition to the desk still feels equally as smooth as well as slick as the day I opened it in spite of days of sweaty wrists wresting on it as well as numerous wipe downs with a rag.

I never purposefully try to dent any type of workdesks as well hard, during some lighter examinations (throwing a set of tricks onto it from a range, for example), it still held up without also many visible indicators of damages.

Finally, when I gauged the sound outcome of the desk while it rose from a resting position to standing and also back once again, it was by far the quietest we’ve evaluated yet. I can hardly get it to make greater than regarding 9.5 dB of noise, so if your largest issue is the whirr of your electric motor, this is definitely the one for you.

Customer support

Currently, usually I don’t include much regarding the client service support of any kind of provided firm, just because I really feel that as a whole if an item functions the means its intended to, I shouldn’t ever have a reason to call them to begin with. As well as while I want I could say that held true throughout my experience with StandDesk, I merely can’t finish this review without pointing out the countless, apparently countless problems I came across attempting to obtain my desk put together.

For beginners, the desk I was sent out really did not have any type of memory mobile phone included initially, which suggested I had no way of really controlling the up/down function on the desk itself. I contacted StandDesk about this problem, that got back to me around a day later with an apology and a guarantee that a new one would certainly be shipped out soon.

Standdesk review handset

The source of all our problems …
About four days later a mobile phone got here in the mail. The handset initially activated, but it wasn’t long prior to I noticed that none of the programmable switches functioned, neither did the down switch, but for some factor the “memory” switch took care of the down function simply great. I contacted the company once again, as well as they excused the mixup and claimed they would certainly have a brand-new panel and also control box bent on me within the week.

Over 2 weeks later on my new panel as well as control box arrived. When I mounted them both the desk lastly started functioning the method it was supposed to, however not after practically a month of waiting as well as back and forth with a business that couldn’t keep in mind to deliver a core part of their product inside the exact same box from the start.

Things to Think about

Despite its bankable attributes, this stand up workdesk likewise has its own disadvantages. Given that no singular stand desk can catch all of the features that you may require, you might think about these in your decision-making.

Lack of a Crossbar as standard

Not having a stabilizing crossbar is absolutely not a deal-breaker, particularly taking into consideration some of our other favored desks such as the Totally Jarvis likewise don’t have one. This desk does have one if you want, however it is a paid add-on (extra on this later also).

The crossbar is seen by some as a limitation, making it tougher to put your legs pleasantly listed below the desk. Others, on the other hand, find that they offer added stability, usually crucial when workdesks are completely extended.

We have not read any problems of the security of this workdesk, so we do not believe its something to truly be concerned concerning, although if you actually desired a desk with a crossbar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

Additionally, StandDesk does supply a separate add-on crossbar that you can include in the desk on your own, just for an added $49.95.

Stability

The stability of a standing desk is just one of the most important aspects of these desks. Without a stable workdesk you’ll find it hard to concentrate, which might cause you becoming much less curious about making use of the desk at standing height. To get the best return on your investment, you’ll intend to enjoy when utilizing the desk.

Because the StandDesk Simple is the initial workdesk that I have actually examined with an optional cross support, I will break down my security tests right into 2 areas. Both tests will consist of the normal front to back shaking test and an entrusted to ideal wobble. The first will certainly lack the cross assistance and the second will certainly be with it. Just to note, StandDesk.co states that the enhancement of the cross assistance can enhance security by as much as 15%. I have no suggestion just how they created that number.

Without Cross Assistance

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the second desk that I checked that wobbled at the bottom with weight on the desktop computer. The first was the IKEA Bekant. By the time it got to 36″ the shaking motion was bad. Yet point it would certainly affect your job.

With Cross Support

Front to Back: Including the cross support does not influence the rocking motion. The StandDesk Simple began to experienced a rocking activity at 36″. By 41″ the rocking activity was bad.

Left to Right: Including the cross assistance to the StandDesk enhanced the wobble activity for lower elevations. With the cross support the wobble motion didn’t start up until you reached 35″. By 39″ the wobble motion came to be poor.

Keep in mind: It’s extremely important with adjustable standing desks to completely tighten all hardware. If there is equipment that is not entirely tight, the motion experienced when encompassed standing elevation will certainly be overemphasized. This is specifically real with a desk frame that includes 32 screws, there are much too many factors at which the desk has an opportunity to move.

Verdict

Like all the Chinese bases we have actually evaluated in our labs, we have to narrow our suggestion on the StandDesk Pro to much shorter users with narrower desktop computers, as the stability just isn’t there for a big mass raised high off the ground. American-made desks will be much better matched to these applications, and also for a rather obvious reason. Virtually all American-made bases are made in US factories that are possessed by Swedish, Danish or German firms that designed this market, as well as their typical citizens are a great deal taller than the average Asian customer, so they began making longer-stroke training legs a long time ago. And they have even more robotic automation, laser-cutting devices, and large experience making standing workdesk bases, obviously.

Yet if you’re not as well tall, do not have an excessive quantity of heavy equipment on your desktop, as well as do not need as well wide of a workdesk, the StandDesk Pro will certainly provide you good bang for your buck.

All that might change with Yu’s assured StandDesk Pro 2.0 style that he anticipates to release sometime in the future. Initially we were told we ‘d see it by June 2018. Greater than a year later on it has yet to emerge, as well as Yu states he’s had problem getting the product high quality he requires out of several Chinese manufacturing facilities he’s tried working with. The new design is apparently going to be much easier to construct and also have a heftier bar layout, among other improvements. He claims the new base will certainly be supplied in both a “T-Leg” and also “C-Leg” configuration, relieving our issue regarding side-load emphasizing on the lifting columns.

If this brand-new base ever involves market we’ll update you right here. We’re not holding our breath any type of longer as the most current information on the business is that Yu closed the little Los Angeles workplace and has actually transferred it to join with all its other employees in southeast Asia.

In the meantime, a brand-new $399 standing desk with impressive performance has been present through the new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in size as well as shade alternatives, it has taken the mantle away from StandDesk’s long-ago condition as the very best standing workdesk under $400.

The StandDesk was created by millennials, is marketed right at millennials, as well as has been gobbled up by millennials in remarkable quantities. While it lugs a ten-year warranty (the longest of any kind of Chinese-made base), in this instance it’s not always a reliable indication of the anticipated valuable life of the lifting columns. However, for the price, the StandDesk is a wonderful lower-cost option to the UpLift, Jarvis and various other Chinese-made desks. Despite its security issues this is a far much better product than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, and also a good value on the whole. It’s the mid-priced offering in the broad group of Chinese-made workdesks that is swaying consumers from both its more affordable as well as more expensive peers.

StandDesk Building And Construction, Configuration, as well as Gizmos

Developing the desk is rather simple if you comply with the comprehensive instructions. Every one of the screws, screws, washers, as well as spring washers can be found in different bags that are marked with their destination: table top, structure, and spares. There’s an included hex tool for attaching all of the screws right into the frame, or, appear a hex bit into your power tool– simply be careful not to over-tighten.

Every one of the parts have a top quality finish to them with rounded corners to prevent cut hands. Below is a shot of all the screws that are secured to the leg setting up– it’s not going anywhere!

Standdesk-Leg

The foot assembly also consists of height-adjustable rotation gears to maintain the front-to-back movement of the desk, which was really useful for the carpeted home office flooring. I’m also making use of a flooring mat to safeguard the carpeting from chair wheel damages at resting elevation, and also push the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller was worth the financial investment. The switches are all variable pressure configured, indicating the up and down arrows will certainly change the height by 1/10th of an inch with a single press, or continually adjust the elevation by about 0.7 inches per 2nd if you hold the switch for two seconds. The memory buttons are similar in layout: press to remember the height setting, or hold the button down for 5 seconds to save a brand-new height value. I’m utilizing button 1 for my resting setting as well as switch 4 for my standing placement, which provides me 2 and 3 for anything I may require in the future.

Standdesk-Memory-unit

Using my Standdesk

I’ve been making use of the new desk for a few weeks and also have actually documented my preliminary impressions:

The motors are quiet yet can be listened to in the following room over. It takes maybe 25 seconds for the desk to completely change from resting to standing based upon my presets.
I utilize an Ergotron side-by-side check arm (especially this LX design), causing the desk to get a little rough when I change my weight versus the keyboard. In hindsight, I need to have bought the crossbar upgrade for my workdesk after determining the weight of my displays. If you prepare to do a dual screen configuration, get the crossbar.

Due to the fact that gravity presses the discs in a human spine, I need to elevate the desk greater in the morning and reduced it in the evening.

An anti-fatigue floor covering is definitely essential for long duration standing. I bought an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are pictured listed below.

Performance

In spite of any kind of problems I might have had with the mobile phone or the cookie-cutter design, pretty much all of those issues removed once I actually came down to utilizing this thing.

I really did not believe it was also feasible, the StandDesk somehow manages to be even a lot more steady than the Jarvis, both at resting as well as standing elevations. Many days I like to run my Jarvis at max height while pressed versus my wall; not always since it’s that wobbly, but even if I want as much security as I can obtain.

The StandDesk one ups the gambit also additionally, proving to be equally as stable by itself at standing height as the Jarvis is with wall support. This is all without the business’s crossbar enhancement, which they assert includes even more stability when bought as a part of the plan deal.When it comes to weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being ranked for up to 350 pounds of weight capacity.

I have actually been making use of the desk for regarding 3 weeks currently for everyday work (and complying with standing workdesk finest methods), whether it’s keying out reviews like this one from our desktop computer or a laptop computer from time to time. The desk stands up well against non-coastered beverages, and the surface in addition to the desk still feels just as smooth as well as slick as the day I opened it in spite of days of perspiring wrists wresting on it and multiple wipe downs with a cloth.

Though I never ever deliberately attempt to damage any kind of desks as well hard, throughout some lighter tests (tossing a set of tricks onto it from a range, for instance), it still stood up without a lot of visible signs of damage.

When I measured the sound output of the desk while it increased from a sitting setting to standing as well as back once more, it was by far the quietest we have actually evaluated. I can barely get it to make more than concerning 9.5 dB of sound, so if your most significant concern is the whirr of your electric motor, this is most definitely the one for you.

Client service

Currently, generally I do not include much concerning the customer service assistance of any kind of given firm, only because I really feel that as a whole if a product functions the method its supposed to, I should not ever before have a factor to call them in the first place. And while I want I might state that was the case throughout my experience with StandDesk, I just can’t finish this evaluation without stating the numerous, relatively unlimited problems I ran into attempting to get my workdesk assembled.

For starters, the desk I was sent out really did not have any memory mobile phone consisted of originally, which meant I had no chance of in fact managing the up/down feature on the desk itself. I called StandDesk concerning this problem, that returned to me around a day later on with an apology and an assurance that a brand-new one would be shipped out shortly.

Standdesk testimonial handset

The resource of all our problems …
Concerning 4 days later a handset got here in the mail. The phone at first switched on, but it wasn’t long before I noticed that none of the programmable buttons worked, neither did the down switch, but for some factor the “memory” button dealt with the down feature just fine. I got in touch with the company once again, and they apologized for the mixup and claimed they would have a brand-new panel and control box out to me within the week.

Over 2 weeks later my new panel as well as control box arrived. When I mounted them both the desk ultimately began functioning the way it was intended to, however not after practically a month of waiting and also backward and forward with a company that could not remember to ship a core part of their item inside the very same box from the beginning.

Points to Consider

Despite its bankable functions, this stand up desk additionally has its own drawbacks. Considering that no particular stand desk could record all of the attributes that you may require, you might think about these in your decision-making.

Lack of a Bar as requirement

Not having a stabilizing bar is absolutely not a deal-breaker, specifically thinking about a few of our various other preferred workdesks such as the Fully Jarvis also don’t have one. In fact, this desk does have one if you want, yet it is a paid add-on (extra on this later also).

The bar is seen by some as a limitation, making it harder to place your legs comfortably below the desk. Others, on the other hand, locate that they give added security, commonly important when desks are completely extended.

We have not review any issues of the stability of this workdesk, so we do not believe its something to truly be concerned about, although if you actually wanted a desk with a crossbar then we advise you take a look at the Varidesk ProDesk 60 Electric.

Conversely, StandDesk does offer a separate add-on crossbar that you can add to the desk on your own, just for an extra $49.95.

Security

The security of a standing desk is just one of one of the most crucial elements of these desks. Without a secure workdesk you’ll discover it hard to focus, which could lead to you coming to be much less curious about using the desk at standing elevation. To obtain the very best return on your financial investment, you’ll wish to more than happy when utilizing the desk.

Because the StandDesk Simple is the first desk that I have actually examined with an optional cross support, I will certainly break down my stability examinations into 2 areas. Both tests will certainly consist of the typical front to back rocking examination and also a left to right wobble. The initial will be without the cross assistance and also the second will certainly be with it. Just to note, StandDesk.co says that the enhancement of the cross support can increase security by as much as 15%. I have no idea exactly how they thought of that number.

Without Cross Assistance

Left to Right: The wobble test was a various scenario. StandDesk Simple was the 2nd desk that I examined that tottered at the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the rocking motion misbehaved. Yet point it would influence your job.

With Cross Assistance

Front to Back: Adding the cross support does not impact the shaking movement. The StandDesk Simple began to experienced a rocking motion at 36″. By 41″ the shaking movement misbehaved.

Delegated Right: Including the cross support to the StandDesk boosted the wobble motion for reduced heights. With the cross support the wobble motion didn’t start up until you got to 35″. By 39″ the wobble movement ended up being negative.

Note: It’s extremely essential with flexible standing desks to completely tighten up all equipment. If there is hardware that is not totally limited, the activity experienced when included standing height will certainly be overemphasized. This is particularly real with a workdesk structure that consists of 32 screws, there are much too many points at which the desk has a possibility to move.

Verdict

Like all the Chinese bases we have actually examined in our laboratories, we have to narrow our suggestion on the StandDesk Pro to much shorter customers with narrower desktop computers, as the stability just isn’t there for a huge mass elevated high off the ground. American-made workdesks will be much better fit to these applications, as well as for a fairly obvious factor. Essentially all American-made bases are made in United States manufacturing facilities that are owned by Swedish, Danish or German companies that invented this sector, and their average people are a great deal taller than the average Oriental consumer, so they began making longer-stroke training legs a long time ago. As well as they have even more robot automation, laser-cutting devices, and large experience making standing workdesk bases, obviously.

Yet if you’re not also tall, don’t have an extreme quantity of hefty equipment on your desktop computer, and do not need too wide of a desk, the StandDesk Pro will certainly give you excellent value.

All that might change with Yu’s promised StandDesk Pro 2.0 design that he expects to launch sometime in the future. Originally we were informed we would certainly see it by June 2018. More than a year later it has yet to emerge, and also Yu states he’s had trouble getting the item quality he requires out of a number of Chinese factories he’s attempted working with. The new layout is supposedly going to be a lot easier to put together and have a heftier bar layout, to name a few refinements. He says the brand-new base will be used in both a “T-Leg” as well as “C-Leg” arrangement, relieving our worry about side-load worrying on the training columns.

If this new base ever before pertains to market we’ll upgrade you here. But we’re not holding our breath any longer as one of the most recent news on the business is that Yu shut the small Los Angeles workplace and has actually relocated it to accompany all its various other workers in southeast Asia.

In the meantime, a new $399 standing desk with impressive efficiency has actually been present via the new joint venture between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension and also shade options, it has taken the mantle far from StandDesk’s long-ago standing as the most effective standing workdesk under $400.