The StandDesk was developed by millennials, is marketed right at millennials, and has actually been gobbled up by millennials in excellent quantities. While it carries a ten-year warranty (the lengthiest of any Chinese-made base), in this instance it’s not always a reliable sign of the anticipated valuable life of the lifting columns. But also for the rate, the StandDesk is a wonderful lower-cost option to the UpLift, Jarvis and also various other Chinese-made workdesks. Despite its stability issues this is a far much better product than the Autonomous SmartDesk or IKEA Bekant could ever before intend to be, as well as a good value generally. It’s the mid-priced offering in the broad category of Chinese-made desks that is swaying consumers from both its less expensive and pricier peers.

StandDesk Building, Arrangement, and Gadgets

Constructing the desk is rather direct if you follow the thorough guidelines. Every one of the screws, bolts, washing machines, and springtime washing machines can be found in different bags that are noted with their destination: table top, frame, and also spares. There’s a consisted of hex tool for fastening all of the screws right into the structure, or, pop in a hex bit right into your power device– simply take care not to over-tighten.

Every one of the parts have a top quality coating to them with rounded corners to prevent cut hands. Below is a shot of all the bolts that are attached to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot assembly likewise consists of height-adjustable turning gears to stabilize the front-to-back movement of the desk, which was very practical for the carpeted home office floor. I’m likewise using a floor mat to secure the carpet from chair wheel damages at resting elevation, and also press the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller was worth the investment. The buttons are all variable pressure programmed, indicating the backwards and forwards arrowheads will readjust the height by 1/10th of an inch with a solitary press, or continuously change the height by around 0.7 inches per second if you hold the button for 2 secs. The memory buttons are comparable in style: press to recall the elevation setup, or hold the button down for five secs to store a brand-new height worth. I’m using button 1 for my sitting setting and button 4 for my standing setting, which gives me 2 and also 3 for anything I could require in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I’ve been making use of the new workdesk for a few weeks and have actually jotted down my preliminary perceptions:

The electric motors are quiet yet can be heard in the following area over. It takes maybe 25 seconds for the desk to totally change from sitting to standing based on my presets.
I utilize an Ergotron side-by-side check arm (especially this LX model), creating the desk to obtain a little rocky when I change my weight versus the key-board. In knowledge, I must have acquired the bar upgrade for my workdesk after figuring out the weight of my screens. If you plan to do a dual display configuration, get the bar.

Since gravity compresses the discs in a human spinal column, I need to raise the desk greater in the early morning as well as reduced it in the evening.

An anti-fatigue floor covering is absolutely important for long duration standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are envisioned listed below.

Performance

In spite of any type of issues I may have had with the mobile or the cookie-cutter layout, practically every one of those worries gotten rid of as soon as I in fact came down to using this thing.

I really did not assume it was even possible, the StandDesk in some way handles to be even extra steady than the Jarvis, both at sitting and standing elevations. A lot of days I like to run my Jarvis at max elevation while pushed versus my wall surface; not necessarily because it’s that wobbly, however even if I desire as much security as I can obtain.

The StandDesk one ups the gambit even further, confirming to be just as stable by itself at standing height as the Jarvis is with wall support. This is all without the company’s bar addition, which they declare adds a lot more security when purchased as a part of the package deal.When it pertains to weight tolerance, the StandDesk shares yet a lot more stats with the Jarvis, being rated for approximately 350 lbs of weight capacity.

I have actually been making use of the desk for concerning three weeks currently for everyday job (and also adhering to standing desk best practices), whether it’s inputting out evaluations similar to this one from our desktop or a laptop every now and then. The desk stands up well versus non-coastered drinks, and the surface in addition to the desk still really feels just as smooth and also slick as the day I opened it regardless of days of sweaty wrists wresting on it and multiple wipe downs with a dustcloth.

I never ever intentionally attempt to damage any type of workdesks too hard, during some lighter tests (tossing a set of tricks onto it from a distance, for instance), it still held up without also several visible indicators of damages.

When I gauged the noise outcome of the workdesk while it increased from a resting position to standing as well as back once more, it was by much the quietest we have actually evaluated. I could barely get it to make more than about 9.5 dB of noise, so if your largest issue is the whirr of your motor, this is absolutely the one for you.

Customer support

Currently, typically I don’t include much regarding the customer service support of any given firm, only because I really feel that generally if an item works the way its meant to, I should not ever have a reason to call them to begin with. And also while I want I can say that held true during my experience with StandDesk, I simply can’t finish this testimonial without mentioning the various, relatively unlimited problems I came across trying to obtain my desk put together.

For beginners, the desk I was sent really did not have any memory mobile phone consisted of originally, which suggested I had no chance of in fact regulating the up/down function on the desk itself. I spoke to StandDesk regarding this problem, who returned to me around a day later on with an apology and also a guarantee that a new one would be shipped out quickly.

Standdesk evaluation handset

The resource of all our troubles …
About 4 days later a mobile got here in the mail. The phone originally switched on, however it had not been long prior to I saw that none of the programmable switches worked, neither did the down button, but also for some reason the “memory” switch managed the down function simply great. I contacted the firm again, and they excused the mixup and claimed they would have a new panel and also control box bent on me within the week.

Over two weeks later my brand-new panel and control box got here. When I installed them both the desk lastly started functioning the means it was supposed to, but not after practically a month of waiting as well as backward and forward with a company that couldn’t remember to deliver a core element of their product inside the same box from the outset.

Points to Take into consideration

Despite its bankable functions, this stand up workdesk additionally has its very own drawbacks. Because no singular stand desk can catch every one of the attributes that you may require, you might think about these in your decision-making.

Lack of a Bar as standard

Not having a maintaining bar is absolutely not a deal-breaker, specifically taking into consideration some of our various other preferred desks such as the Totally Jarvis likewise do not have one. Actually, this desk does have one if you desire, however it is a paid add-on (more on this later on too).

The bar is seen by some as a limitation, making it more challenging to position your legs pleasantly listed below the desk. Others, on the other hand, discover that they give included security, typically important when workdesks are fully extended.

We have not read any complaints of the security of this workdesk, so we do not assume its something to actually be concerned concerning, although if you truly wanted a workdesk with a crossbar then we recommend you have a look at the Varidesk ProDesk 60 Electric.

Conversely, StandDesk does supply a separate add-on bar that you can add to the desk yourself, just for an added $49.95.

Stability

The security of a standing desk is just one of the most essential facets of these desks. Without a secure workdesk you’ll locate it difficult to focus, which could cause you coming to be much less thinking about making use of the desk at standing height. To get the very best return on your investment, you’ll intend to more than happy when using the desk.

Due To The Fact That the StandDesk Simple is the initial desk that I have actually tested with an optional cross support, I will break down my stability examinations into 2 sections. Both examinations will consist of the regular front to back rocking test and also a delegated best wobble. The very first will certainly lack the cross support and the second will certainly be with it. Just to keep in mind, StandDesk.co states that the enhancement of the cross assistance can enhance security by approximately 15%. I have no concept how they created that number.

Without Cross Assistance

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the 2nd desk that I tested that wobbled near the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it got to 36″ the shaking activity misbehaved. Yet point it would certainly influence your work.

With Cross Support

Front to Back: Adding the cross support does not impact the shaking movement. The StandDesk Simple started to experienced a rocking motion at 36″. By 41″ the rocking motion misbehaved.

Entrusted to Right: Including the cross assistance to the StandDesk boosted the wobble motion for reduced heights. With the cross assistance the wobble activity really did not start until you reached 35″. By 39″ the wobble activity came to be negative.

Note: It’s really important with flexible standing desks to totally tighten up all hardware. If there is hardware that is not completely tight, the activity experienced when reached standing elevation will be overemphasized. This is specifically true with a desk frame that includes 32 screws, there are far way too many points at which the desk has a possibility to move.

Conclusion

Like all the Chinese bases we’ve checked in our labs, we need to tighten our suggestion on the StandDesk Pro to shorter individuals with narrower desktops, as the stability simply isn’t there for a big mass boosted high off the ground. American-made desks will certainly be much better matched to these applications, and for a fairly evident reason. Basically all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German business that created this market, and also their average residents are a whole lot taller than the typical Eastern consumer, so they began making longer-stroke lifting legs a long time back. As well as they have much more robotic automation, laser-cutting equipment, as well as large experience making standing desk bases, needless to say.

Yet if you’re not also high, don’t have an excessive amount of hefty equipment on your desktop, as well as don’t require also wide of a workdesk, the StandDesk Pro will certainly offer you good value.

All that might transform with Yu’s assured StandDesk Pro 2.0 layout that he expects to release at some point in the future. Initially we were informed we ‘d see it by June 2018. Greater than a year later it has yet to appear, and Yu states he’s had problem getting the product quality he requires out of several Chinese manufacturing facilities he’s tried dealing with. The new design is apparently mosting likely to be much easier to construct and also have a heftier bar layout, to name a few refinements. He says the new base will be provided in both a “T-Leg” as well as “C-Leg” setup, minimizing our worry about side-load stressing on the lifting columns.

If this new base ever before comes to market we’ll update you below. However we’re not holding our breath any kind of longer as one of the most recent information on the company is that Yu shut the little Los Angeles office as well as has transferred it to accompany all its other employees in southeast Asia.

In the meantime, a brand-new $399 standing desk with excellent performance has been present via the new joint endeavor in between US-based iMovR and China-based Eureka, the i1 electric standing desk. While restricted in size as well as shade alternatives, it has actually taken the mantle far from StandDesk’s long-ago condition as the most effective standing workdesk under $400.

The StandDesk was developed by millennials, is marketed directly at millennials, as well as has actually been gobbled up by millennials in outstanding quantities. While it carries a ten-year service warranty (the lengthiest of any kind of Chinese-made base), in this case it’s not necessarily a dependable indicator of the anticipated valuable life of the lifting columns. But also for the cost, the StandDesk is a fantastic lower-cost option to the UpLift, Jarvis and other Chinese-made desks. Despite its stability concerns this is a much better product than the Autonomous SmartDesk or IKEA Bekant could ever want to be, and a good value on the whole. It’s the mid-priced offering in the wide group of Chinese-made workdesks that is swaying customers from both its more affordable and costlier peers.

StandDesk Building And Construction, Setup, and Gizmos

Building the desk is rather simple if you follow the detailed guidelines. Every one of the screws, screws, washing machines, and spring washers come in separate bags that are noted with their destination: table top, frame, as well as spares. There’s a consisted of hex tool for fastening every one of the screws right into the framework, or, appear a hex little bit into your power device– just beware not to over-tighten.

All of the parts have an excellent quality finish to them with rounded corners to avoid cut hands. Below is a shot of all the bolts that are secured to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot assembly likewise includes height-adjustable turning equipments to stabilize the front-to-back motion of the desk, which was really helpful for the carpeted home office floor. I’m likewise utilizing a flooring mat to protect the carpet from chair wheel damage at sitting elevation, and also push the chair back when I’m transitioning to standing height.

Standdesk-Foot

The luxurious controller was worth the investment. The buttons are all variable stress configured, implying the backwards and forwards arrows will adjust the height by 1/10th of an inch with a solitary press, or continuously change the height by about 0.7 inches per 2nd if you hold the switch for two secs. The memory switches are comparable in style: press to remember the elevation setting, or hold the button down for 5 seconds to save a new height worth. I’m using switch 1 for my sitting position and button 4 for my standing position, which offers me 2 and 3 for anything I may require in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I’ve been using the new workdesk for a couple of weeks and also have actually documented my preliminary impacts:

The motors are quiet yet can be heard in the following space over. It takes possibly 25 seconds for the desk to completely change from resting to standing based upon my presets.
I make use of an Ergotron side-by-side keep track of arm (especially this LX version), triggering the desk to get a little rocky when I shift my weight versus the keyboard. In hindsight, I ought to have acquired the crossbar upgrade for my workdesk after determining the weight of my monitors. If you prepare to do a double screen arrangement, get the bar.

Due to the fact that gravity presses the discs in a human spinal column, I require to raise the desk greater in the early morning and also reduced it in the evening.

An anti-fatigue floor covering is definitely vital for long duration standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are imagined below.

Performance

In spite of any kind of problems I might have had with the phone or the cookie-cutter layout, practically all of those problems removed as soon as I actually got down to utilizing this thing.

I really did not think it was even possible, the StandDesk somehow manages to be even much more steady than the Jarvis, both at resting and also standing elevations. Many days I like to run my Jarvis at max height while pressed against my wall surface; not always because it’s that wobbly, but even if I desire as much security as I can get.

The StandDesk one ups the gambit even better, confirming to be equally as stable by itself at standing height as the Jarvis is with wall support. This is all without the business’s crossbar enhancement, which they declare adds much more stability when bought as a part of the package deal.When it concerns weight resistance, the StandDesk shares yet much more stats with the Jarvis, being ranked for up to 350 pounds of weight capacity.

I’ve been making use of the desk for concerning 3 weeks currently for day-to-day work (and also adhering to standing workdesk best methods), whether it’s typing out testimonials like this one from our desktop or a laptop computer periodically. The desk holds up well versus non-coastered beverages, and also the finish in addition to the desk still feels equally as smooth as well as slick as the day I opened it in spite of days of sweaty wrists wresting on it and multiple clean downs with a rag.

I never intentionally try to dent any kind of desks too hard, throughout some lighter tests (throwing a set of tricks onto it from a range, for example), it still held up without too many noticeable indicators of damages.

Finally, when I measured the noise output of the desk while it climbed from a resting placement to standing and back again, it was without a doubt the quietest we have actually tested yet. I could hardly get it to make greater than concerning 9.5 dB of sound, so if your greatest issue is the whirr of your electric motor, this is definitely the one for you.

Customer Service

Currently, typically I do not include much regarding the customer care support of any offered company, only since I feel that generally if an item works the way its meant to, I should not ever have a factor to call them to begin with. And also while I wish I can claim that was the case throughout my experience with StandDesk, I simply can not finish this review without stating the various, apparently limitless problems I encountered trying to get my workdesk put together.

For starters, the desk I was sent out didn’t have any memory phone consisted of originally, which indicated I had no way of really managing the up/down function on the desk itself. I spoke to StandDesk about this issue, who returned to me around a day later with an apology as well as a guarantee that a brand-new one would be shipped shortly.

Standdesk review handset

The source of all our issues …
Concerning four days later on a handset got here in the mail. The mobile originally switched on, however it had not been long prior to I observed that none of the programmable buttons functioned, nor did the down button, but for some reason the “memory” switch dealt with the down feature simply great. I got in touch with the firm once again, and also they excused the mixup as well as stated they would certainly have a new panel and control box out to me within the week.

Over two weeks later my brand-new panel as well as control box got here. When I installed them both the desk ultimately started functioning the means it was expected to, however not after nearly a month of waiting and also back and forth with a firm that could not bear in mind to deliver a core component of their product inside the exact same box from the start.

Things to Take into consideration

In spite of its bankable functions, this stand desk additionally has its very own disadvantages. Since no particular stand workdesk can catch all of the functions that you might require, you may consider these in your decision-making.

Absence of a Crossbar as criterion

Not having a supporting crossbar is certainly not a deal-breaker, specifically taking into consideration several of our various other favorite desks such as the Completely Jarvis likewise don’t have one. As a matter of fact, this desk does have one if you desire, yet it is a paid add-on (more on this later on as well).

The crossbar is seen by some as an obstacle, making it more difficult to place your legs easily listed below the desk. Others, on the other hand, locate that they offer included security, often essential when desks are totally extended.

We have not check out any kind of issues of the stability of this desk, so we do not assume its something to actually be worried regarding, although if you really wanted a workdesk with a crossbar after that we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does supply a separate add-on crossbar that you can include to the desk yourself, just for an extra $49.95.

Stability

The security of a standing workdesk is among the most essential aspects of these desks. Without a steady workdesk you’ll discover it difficult to concentrate, which might lead to you becoming much less thinking about using the desk at standing height. To get the very best return on your investment, you’ll intend to enjoy when using the desk.

Since the StandDesk Simple is the first desk that I have actually examined with an optional cross support, I will break down my stability examinations into two areas. Both tests will consist of the normal front to back rocking test and also an entrusted to ideal wobble. The initial will certainly lack the cross assistance as well as the secondly will certainly be with it. Just to keep in mind, StandDesk.co says that the enhancement of the cross assistance can enhance stability by up to 15%. I have no idea just how they developed that number.

Without Cross Support

Left to Right: The wobble examination was a various scenario. StandDesk Simple was the second workdesk that I evaluated that wobbled near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the rocking activity misbehaved. Beyond this point it would influence your job.

With Cross Support

Front to Back: Adding the cross assistance does not impact the rocking motion. The StandDesk Simple began to experienced a rocking movement at 36″. By 41″ the shaking motion misbehaved.

Entrusted to Right: Adding the cross support to the StandDesk enhanced the wobble motion for reduced heights. With the cross support the wobble motion really did not begin till you reached 35″. By 39″ the wobble activity ended up being negative.

Note: It’s very essential with adjustable standing desks to fully tighten all hardware. If there is equipment that is not totally tight, the movement experienced when extended to standing height will certainly be overemphasized. This is particularly true with a workdesk structure that includes 32 screws, there are much too many points at which the desk has a chance to relocate.

Final thought

Like all the Chinese bases we’ve examined in our labs, we need to tighten our suggestion on the StandDesk Pro to shorter users with narrower desktops, as the security just isn’t there for a large mass boosted high off the ground. American-made desks will be better fit to these applications, as well as for a rather noticeable factor. Virtually all American-made bases are made in US manufacturing facilities that are had by Swedish, Danish or German firms that designed this sector, and also their ordinary people are a whole lot taller than the typical Asian consumer, so they started making longer-stroke training legs a long period of time back. And they have far more robot automation, laser-cutting tools, and large experience making standing desk bases, it goes without saying.

However if you’re not also high, do not have an extreme amount of heavy tools on your desktop, as well as don’t need also wide of a workdesk, the StandDesk Pro will offer you great bang for your buck.

All that may change with Yu’s guaranteed StandDesk Pro 2.0 layout that he expects to launch at some point in the future. Originally we were informed we ‘d see it by June 2018. More than a year later on it has yet to appear, and also Yu states he’s had trouble getting the product high quality he requires out of a number of Chinese factories he’s tried working with. The brand-new design is allegedly mosting likely to be much easier to construct as well as have a heftier bar layout, to name a few refinements. He claims the brand-new base will be used in both a “T-Leg” and also “C-Leg” setup, easing our concern concerning side-load worrying on the lifting columns.

If this brand-new base ever before involves market we’ll upgrade you here. We’re not holding our breath any longer as the most current information on the company is that Yu shut the little Los Angeles office as well as has moved it to join with all its other staff members in southeast Asia.

In the meantime, a new $399 standing desk with remarkable efficiency has been present via the new joint endeavor between US-based iMovR as well as China-based Eureka, the i1 electrical standing workdesk. While limited in dimension and also shade options, it has actually taken the mantle away from StandDesk’s long-ago status as the very best standing workdesk under $400.