The StandDesk was produced by millennials, is marketed straight at millennials, and has been gobbled up by millennials in impressive volumes. While it brings a ten-year warranty (the lengthiest of any Chinese-made base), in this instance it’s not necessarily a trusted indication of the anticipated useful life of the lifting columns. For the rate, the StandDesk is an excellent lower-cost choice to the UpLift, Jarvis and also various other Chinese-made workdesks. Despite its stability concerns this is a far better product than the Autonomous SmartDesk or IKEA Bekant can ever wish to be, as well as a good value overall. It’s the mid-priced offering in the wide category of Chinese-made desks that is winning over consumers from both its more affordable and also pricier peers.

StandDesk Construction, Configuration, and also Gizmos

Building the desk is pretty straight forward if you follow the detailed directions. Every one of the screws, bolts, washers, and also spring washers come in different bags that are noted with their location: table top, frame, as well as spares. There’s a consisted of hex tool for fastening all of the bolts into the framework, or, appear a hex little bit into your power device– just beware not to over-tighten.

Every one of the components have a top quality coating to them with rounded edges to avoid cut hands. Below is a shot of all the bolts that are fastened to the leg setting up– it’s not going anywhere!

Standdesk-Leg

The foot setting up additionally consists of height-adjustable rotation gears to stabilize the front-to-back activity of the desk, which was very practical for the carpeted home office flooring. I’m additionally making use of a floor mat to secure the rug from chair wheel damage at resting height, and push the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The luxurious controller deserved the financial investment. The switches are all variable pressure configured, suggesting the up and down arrows will readjust the elevation by 1/10th of an inch with a solitary press, or constantly readjust the elevation by about 0.7 inches per second if you hold the switch for two seconds. The memory buttons are similar in style: press to recall the elevation setting, or hold the button down for 5 seconds to save a new height worth. I’m using switch 1 for my resting setting as well as button 4 for my standing setting, which offers me 2 and also 3 for anything I might require in the future.

Standdesk-Memory-unit

Using my Standdesk

I’ve been utilizing the brand-new desk for a couple of weeks and also have actually written down my first impressions:

The motors are quiet but can be listened to in the following space over. It takes perhaps 25 seconds for the desk to totally shift from sitting to standing based upon my presets.
I utilize an Ergotron side-by-side check arm (specifically this LX model), causing the desk to get a little rocky when I shift my weight versus the key-board. In hindsight, I should have purchased the bar upgrade for my workdesk after determining the weight of my screens. If you plan to do a twin screen configuration, obtain the crossbar.

Due to the fact that gravity presses the discs in a human back, I require to elevate the desk higher in the morning and lower it in the evening.

An anti-fatigue floor covering is definitely necessary for long duration standing. I bought an Octagonal floor covering from SmartCells, making use of rubber “cells” that are visualized listed below.

Performance

Despite any problems I might have had with the mobile phone or the cookie-cutter layout, practically all of those issues gotten rid of once I really got down to utilizing this point.

Although I didn’t assume it was even feasible, the StandDesk in some way manages to be a lot more secure than the Jarvis, both at sitting and standing heights. The majority of days I such as to run my Jarvis at max elevation while pressed versus my wall; not necessarily since it’s that shaky, however even if I desire as much stability as I can obtain.

The StandDesk one ups the gambit also additionally, proving to be equally as constant by itself at standing height as the Jarvis is with wall support. This is all without the firm’s bar addition, which they claim adds a lot more stability when bought as a part of the bundle deal.When it involves weight tolerance, the StandDesk shares yet even more stats with the Jarvis, being ranked for approximately 350 pounds of weight capacity.

I’ve been utilizing the desk for about 3 weeks currently for daily job (and adhering to standing desk finest practices), whether it’s typing out testimonials such as this one from our desktop computer or a laptop computer from time to time. The desk stands up well versus non-coastered beverages, and the coating in addition to the desk still feels equally as smooth and also slick as the day I opened it in spite of days of perspiring wrists wresting on it and several clean downs with a cloth.

I never ever intentionally try to damage any type of desks also hard, throughout some lighter examinations (throwing a set of keys onto it from a distance, for instance), it still held up without too lots of visible indications of damages.

Lastly, when I gauged the sound result of the desk while it rose from a sitting setting to standing as well as back once again, it was without a doubt the quietest we have actually checked yet. I could barely get it to make more than about 9.5 dB of noise, so if your biggest concern is the whirr of your electric motor, this is absolutely the one for you.

Customer care

Currently, generally I don’t include much regarding the customer care support of any provided firm, only since I feel that as a whole if a product functions the way its intended to, I shouldn’t ever before have a reason to call them to begin with. As well as while I desire I might claim that was the case throughout my experience with StandDesk, I merely can’t finish this testimonial without discussing the countless, seemingly unlimited problems I came across trying to get my desk assembled.

For starters, the desk I was sent out didn’t have any type of memory mobile included originally, which suggested I had no way of in fact regulating the up/down feature on the desk itself. I spoke to StandDesk about this issue, that returned to me around a day later with an apology and a guarantee that a new one would be shipped out quickly.

Standdesk review handset

The source of all our issues …
Regarding four days later on a mobile phone arrived in the mail. The handset initially switched on, but it had not been long before I discovered that none of the programmable buttons functioned, neither did the down switch, but also for some factor the “memory” button handled the down function simply great. I contacted the business again, as well as they excused the mixup and also said they would have a new panel and control box out to me within the week.

Over two weeks later on my brand-new panel as well as control box showed up. Once I installed them both the desk finally started functioning the means it was supposed to, yet not after practically a month of waiting and also backward and forward with a firm that could not bear in mind to deliver a core component of their item inside the exact same box from the get-go.

Things to Think about

Regardless of its bankable functions, this stand workdesk also has its own downsides. Since no particular stand desk might catch all of the functions that you might need, you might take into consideration these in your decision-making.

Absence of a Crossbar as requirement

Not having a maintaining bar is absolutely not a deal-breaker, especially taking into consideration a few of our other preferred desks such as the Totally Jarvis also do not have one. This workdesk does have one if you want, yet it is a paid add-on (a lot more on this later on as well).

The bar is seen by some as a limitation, making it more challenging to place your legs pleasantly listed below the desk. Others, on the other hand, find that they give added security, commonly important when desks are totally expanded.

We have not read any issues of the stability of this workdesk, so we don’t think its something to actually be concerned regarding, although if you actually wanted a workdesk with a crossbar then we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a different add-on bar that you can include to the desk yourself, just for an additional $49.95.

Security

The stability of a standing desk is just one of one of the most crucial aspects of these desks. Without a secure workdesk you’ll locate it hard to concentrate, which might lead to you becoming less interested in utilizing the desk at standing elevation. To get the very best return on your financial investment, you’ll intend to more than happy when making use of the desk.

Since the StandDesk Simple is the first workdesk that I have actually tested with an optional cross assistance, I will break down my stability tests into two sections. Both tests will consist of the normal front to back rocking examination and also an entrusted to best wobble. The very first will lack the cross support and the secondly will be with it. Simply to keep in mind, StandDesk.co states that the addition of the cross support can increase security by as much as 15%. I have no suggestion how they came up with that number.

Without Cross Support

Left to Right: The wobble test was a various scenario. StandDesk Simple was the 2nd workdesk that I checked that tottered near the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it reached 36″ the rocking movement misbehaved. Yet factor it would influence your work.

With Cross Assistance

Front to Back: Including the cross support does not influence the rocking activity. The StandDesk Simple started to experienced a rocking activity at 36″. By 41″ the rocking motion was bad.

Entrusted to Right: Adding the cross support to the StandDesk boosted the wobble movement for lower heights. With the cross assistance the wobble activity didn’t start until you reached 35″. By 39″ the wobble motion came to be negative.

Keep in mind: It’s very important with adjustable standing workdesks to fully tighten all hardware. If there is hardware that is not entirely limited, the movement experienced when extended to standing height will be overemphasized. This is specifically true with a desk structure that includes 32 bolts, there are much way too many points at which the desk has a possibility to relocate.

Conclusion

Like all the Chinese bases we have actually evaluated in our laboratories, we have to narrow our referral on the StandDesk Pro to much shorter individuals with narrower desktop computers, as the stability just isn’t there for a huge mass raised high off the ground. American-made workdesks will certainly be much better matched to these applications, and also for a rather apparent reason. Practically all American-made bases are made in United States manufacturing facilities that are possessed by Swedish, Danish or German firms that developed this market, and their average residents are a lot taller than the ordinary Asian customer, so they started making longer-stroke training legs a long period of time back. As well as they have much more robotic automation, laser-cutting tools, and also large experience making standing desk bases, needless to say.

If you’re not too tall, don’t have an inordinate quantity of hefty equipment on your desktop computer, as well as do not need also vast of a workdesk, the StandDesk Pro will provide you good bang for your dollar.

All that could alter with Yu’s assured StandDesk Pro 2.0 style that he anticipates to launch sometime in the future. Originally we were told we ‘d see it by June 2018. More than a year later it has yet to appear, and Yu states he’s had difficulty getting the product top quality he needs out of numerous Chinese manufacturing facilities he’s attempted working with. The new design is allegedly mosting likely to be much easier to put together and also have a heftier bar style, among other improvements. He says the brand-new base will certainly be provided in both a “T-Leg” as well as “C-Leg” setup, minimizing our concern concerning side-load stressing on the training columns.

If this new base ever before pertains to market we’ll update you right here. However we’re not holding our breath any longer as the most recent information on the firm is that Yu closed the little Los Angeles office as well as has actually moved it to join with all its various other staff members in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with excellent efficiency has actually been introduce through the new joint endeavor between US-based iMovR and also China-based Eureka, the i1 electric standing desk. While limited in dimension and also shade options, it has actually taken the mantle far from StandDesk’s long-ago condition as the most effective standing workdesk under $400.

The StandDesk was created by millennials, is marketed right at millennials, and has actually been demolished by millennials in impressive volumes. While it carries a ten-year service warranty (the lengthiest of any kind of Chinese-made base), in this situation it’s not always a trusted sign of the expected valuable life of the training columns. For the price, the StandDesk is a terrific lower-cost alternative to the UpLift, Jarvis and also other Chinese-made desks. Despite its stability concerns this is a much much better product than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, and also a good value on the whole. It’s the mid-priced offering in the wide category of Chinese-made workdesks that is winning over clients from both its less expensive and pricier peers.

StandDesk Construction, Configuration, and also Gadgets

Constructing the desk is quite easy if you follow the detailed directions. All of the screws, bolts, washers, as well as springtime washers been available in separate bags that are noted with their destination: table top, framework, and spares. There’s an included hex tool for securing all of the bolts into the framework, or, appear a hex little bit right into your power tool– just be careful not to over-tighten.

All of the components have a top quality finish to them with rounded corners to prevent cut hands. Below is a shot of all the screws that are attached to the leg setting up– it’s not going anywhere!

Standdesk-Leg

The foot assembly additionally consists of height-adjustable rotation equipments to support the front-to-back motion of the desk, which was extremely helpful for the carpeted office flooring. I’m also using a floor mat to protect the carpet from chair wheel damage at sitting elevation, and push the chair back when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller was worth the financial investment. The buttons are all variable pressure programmed, suggesting the up and down arrowheads will certainly adjust the height by 1/10th of an inch with a solitary press, or continually adjust the elevation by about 0.7 inches per second if you hold the switch for 2 secs. The memory buttons are similar in layout: push to remember the height setup, or hold the button down for 5 secs to keep a brand-new elevation value. I’m utilizing button 1 for my resting setting and button 4 for my standing setting, which gives me 2 as well as 3 for anything I could need in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I’ve been utilizing the new desk for a few weeks and have actually jotted down my initial perceptions:

The electric motors are quiet however can be heard in the next room over. It takes perhaps 25 secs for the desk to totally transition from sitting to standing based upon my presets.
I make use of an Ergotron side-by-side check arm (particularly this LX version), creating the desk to get a little rocky when I move my weight against the keyboard. In knowledge, I should have bought the bar upgrade for my workdesk after establishing the weight of my screens. If you plan to do a twin monitor arrangement, obtain the bar.

Since gravity presses the discs in a human spine, I require to raise the desk higher in the early morning as well as reduced it in the evening.

An anti-fatigue floor covering is definitely crucial for long period of time standing. I purchased an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are imagined below.

Efficiency

Regardless of any kind of issues I might have had with the handset or the cookie-cutter design, virtually every one of those concerns gotten rid of when I actually came down to utilizing this point.

Although I really did not think it was even possible, the StandDesk in some way manages to be much more secure than the Jarvis, both at sitting and standing elevations. Many days I such as to run my Jarvis at max elevation while pressed against my wall; not necessarily since it’s that unsteady, yet even if I desire as much security as I can get.

The StandDesk one ups the gambit even better, proving to be just as consistent on its own at standing height as the Jarvis is with wall support. This is all without the business’s bar enhancement, which they assert adds much more security when purchased as a part of the plan deal.When it pertains to weight tolerance, the StandDesk shares yet even more statistics with the Jarvis, being rated for as much as 350 pounds of weight capability.

I’ve been making use of the desk for about 3 weeks now for day-to-day work (and also adhering to standing desk finest practices), whether it’s inputting out testimonials such as this one from our desktop or a laptop computer every now and then. The desk holds up well against non-coastered drinks, and also the coating on top of the desk still really feels just as smooth and glossy as the day I opened it despite days of sweaty wrists wresting on it as well as numerous clean downs with a rag.

Though I never intentionally attempt to damage any desks too hard, during some lighter tests (tossing a collection of keys onto it from a range, for instance), it still stood up without way too many noticeable indicators of damages.

Lastly, when I measured the noise output of the desk while it increased from a sitting placement to standing and back once more, it was by far the quietest we have actually checked yet. I might hardly get it to make more than concerning 9.5 dB of noise, so if your greatest concern is the whirr of your motor, this is definitely the one for you.

Customer support

Now, typically I don’t consist of much regarding the customer support support of any kind of given business, only since I really feel that in general if a product functions the way its expected to, I should not ever before have a factor to call them to begin with. As well as while I wish I might claim that held true during my experience with StandDesk, I merely can’t finish this evaluation without discussing the countless, relatively limitless troubles I experienced trying to get my desk assembled.

For beginners, the desk I was sent out didn’t have any type of memory mobile phone included initially, which suggested I had no chance of actually managing the up/down function on the desk itself. I called StandDesk regarding this concern, that got back to me around a day later on with an apology and also an assurance that a brand-new one would be shipped out shortly.

Standdesk evaluation handset

The resource of all our problems …
Concerning 4 days later on a mobile phone got here in the mail. The mobile phone originally turned on, but it wasn’t long before I noticed that none of the programmable buttons functioned, neither did the down switch, but also for some factor the “memory” switch took care of the down feature simply fine. I got in touch with the firm once again, as well as they apologized for the mixup as well as stated they would certainly have a new panel and also control box out to me within the week.

Over two weeks later my new panel and control box got here. As soon as I installed them both the desk lastly began working the means it was expected to, however not after practically a month of waiting and to and fro with a company that could not keep in mind to deliver a core component of their product inside the very same box from the outset.

Things to Take into consideration

In spite of its bankable features, this stand desk likewise has its very own disadvantages. Since no singular stand workdesk could capture all of the attributes that you might require, you may think about these in your decision-making.

Absence of a Crossbar as requirement

Not having a maintaining bar is absolutely not a deal-breaker, particularly considering some of our various other favored desks such as the Fully Jarvis also do not have one. This workdesk does have one if you desire, yet it is a paid add-on (a lot more on this later on as well).

The bar is seen by some as a limitation, making it more challenging to place your legs pleasantly listed below the desk. Others, on the other hand, discover that they provide included security, frequently essential when workdesks are completely extended.

We have not review any type of complaints of the security of this desk, so we do not assume its something to truly be worried about, although if you really wanted a workdesk with a crossbar after that we recommend you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does offer a different add-on bar that you can contribute to the desk on your own, just for an added $49.95.

Security

The security of a standing workdesk is among one of the most vital elements of these workdesks. Without a secure workdesk you’ll locate it tough to focus, which could lead to you becoming much less thinking about using the desk at standing elevation. To obtain the very best return on your financial investment, you’ll want to be happy when utilizing the desk.

Because the StandDesk Simple is the initial workdesk that I have actually checked with an optional cross assistance, I will certainly break down my stability examinations right into two areas. Both examinations will consist of the normal front to back rocking examination and an entrusted to ideal wobble. The very first will certainly be without the cross support and also the second will certainly be with it. Just to note, StandDesk.co claims that the addition of the cross assistance can boost security by approximately 15%. I have no idea exactly how they developed that number.

Without Cross Support

Left to Right: The wobble test was a various situation. StandDesk Simple was the 2nd desk that I examined that tottered near the bottom with weight on the desktop. The initial was the IKEA Bekant. By the time it reached 36″ the shaking motion misbehaved. Beyond this point it would certainly affect your job.

With Cross Support

Front to Back: Adding the cross assistance does not affect the shaking movement. The StandDesk Simple began to experienced a shaking motion at 36″. By 41″ the shaking motion misbehaved.

Entrusted to Right: Adding the cross assistance to the StandDesk enhanced the wobble activity for reduced elevations. With the cross support the wobble movement really did not begin until you got to 35″. By 39″ the wobble motion came to be negative.

Keep in mind: It’s really crucial with adjustable standing workdesks to totally tighten up all equipment. If there is equipment that is not totally tight, the activity experienced when extended to standing elevation will certainly be overemphasized. This is particularly true with a desk frame that includes 32 screws, there are far too many factors at which the desk has a possibility to relocate.

Verdict

Like all the Chinese bases we’ve evaluated in our laboratories, we need to narrow our recommendation on the StandDesk Pro to shorter customers with narrower desktop computers, as the stability just isn’t there for a big mass raised high off the ground. American-made workdesks will be much better fit to these applications, and for a rather evident reason. Practically all American-made bases are made in United States manufacturing facilities that are owned by Swedish, Danish or German companies that invented this market, and also their ordinary citizens are a lot taller than the ordinary Oriental consumer, so they started making longer-stroke training legs a long time back. And they have even more robotic automation, laser-cutting devices, as well as large experience making standing desk bases, obviously.

If you’re not as well tall, do not have an inordinate amount of hefty equipment on your desktop computer, as well as don’t need also large of a desk, the StandDesk Pro will offer you great bang for your dollar.

All that may alter with Yu’s guaranteed StandDesk Pro 2.0 style that he expects to release at some point in the future. Originally we were informed we ‘d see it by June 2018. More than a year later on it has yet to appear, and also Yu states he’s had trouble obtaining the item top quality he requires out of several Chinese manufacturing facilities he’s tried collaborating with. The brand-new layout is apparently going to be a lot easier to put together and have a heftier crossbar design, to name a few improvements. He claims the new base will be offered in both a “T-Leg” and also “C-Leg” configuration, reducing our issue regarding side-load stressing on the lifting columns.

If this new base ever concerns market we’ll update you right here. Yet we’re not holding our breath any longer as the most recent information on the business is that Yu closed the tiny Los Angeles office as well as has relocated it to accompany all its other workers in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with excellent efficiency has been introduce via the new joint venture between US-based iMovR and also China-based Eureka, the i1 electrical standing workdesk. While limited in size as well as color choices, it has actually taken the mantle away from StandDesk’s long-ago standing as the most effective standing desk under $400.