The StandDesk was produced by millennials, is marketed directly at millennials, as well as has been demolished by millennials in outstanding volumes. While it lugs a ten-year warranty (the longest of any Chinese-made base), in this case it’s not always a trustworthy sign of the anticipated beneficial life of the lifting columns. But also for the rate, the StandDesk is a terrific lower-cost alternative to the UpLift, Jarvis and also various other Chinese-made desks. Despite its security problems this is a much much better item than the Autonomous SmartDesk or IKEA Bekant might ever before want to be, as well as a good value on the whole. It’s the mid-priced offering in the broad category of Chinese-made desks that is winning over consumers from both its less costly and costlier peers.

StandDesk Building, Setup, and also Gadgets

Constructing the desk is quite easy if you adhere to the thorough directions. All of the screws, bolts, washing machines, as well as springtime washing machines can be found in separate bags that are noted with their location: table top, structure, and also spares. There’s a consisted of hex device for attaching all of the screws into the framework, or, appear a hex bit right into your power device– just be careful not to over-tighten.

Every one of the components have a top quality surface to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot setting up also consists of height-adjustable rotation gears to support the front-to-back movement of the desk, which was very practical for the carpeted home office floor. I’m additionally using a flooring mat to secure the carpeting from chair wheel damage at resting height, and also push the chair when I’m transitioning to standing elevation.

Standdesk-Foot

The deluxe controller was worth the financial investment. The buttons are all variable stress configured, implying the up and down arrows will adjust the height by 1/10th of an inch with a single press, or constantly change the height by around 0.7 inches per 2nd if you hold the button for 2 seconds. The memory switches are similar in design: press to remember the height setting, or hold the button down for 5 secs to keep a brand-new elevation worth. I’m utilizing button 1 for my sitting setting and also button 4 for my standing position, which provides me 2 and 3 for anything I could require in the future.

Standdesk-Memory-unit

Utilizing my Standdesk

I have actually been utilizing the brand-new desk for a couple of weeks and also have actually documented my first perceptions:

The motors are quiet yet can be listened to in the following room over. It takes possibly 25 seconds for the desk to totally shift from resting to standing based upon my presets.
I use an Ergotron side-by-side monitor arm (especially this LX version), triggering the desk to obtain a little rocky when I move my weight against the keyboard. In knowledge, I must have bought the crossbar upgrade for my desk after establishing the weight of my monitors. If you intend to do a dual monitor arrangement, obtain the crossbar.

Due to the fact that gravity presses the discs in a human spine, I need to increase the desk higher in the morning as well as lower it in the evening.

An anti-fatigue mat is definitely important for long duration standing. I bought an Octagonal mat from SmartCells, using rubber “cells” that are visualized listed below.

Efficiency

Despite any kind of issues I may have had with the mobile or the cookie-cutter layout, practically every one of those worries gotten rid of once I in fact got down to using this point.

I didn’t think it was even feasible, the StandDesk in some way handles to be also more steady than the Jarvis, both at sitting as well as standing elevations. Most days I such as to run my Jarvis at max elevation while pressed versus my wall surface; not always due to the fact that it’s that wobbly, but even if I want as much security as I can obtain.

The StandDesk one ups the gambit also better, confirming to be just as constant on its own at standing elevation as the Jarvis is with wall support. This is all without the company’s crossbar addition, which they assert includes a lot more stability when acquired as a part of the bundle deal.When it pertains to weight resistance, the StandDesk shares yet even more stats with the Jarvis, being rated for as much as 350 lbs of weight capability.

I have actually been making use of the desk for concerning 3 weeks now for everyday job (and following standing workdesk best methods), whether it’s typing out reviews similar to this one from our desktop computer or a laptop computer every so often. The desk holds up well versus non-coastered drinks, as well as the finish on top of the desk still feels just as smooth and also slick as the day I opened it despite days of sweaty wrists wresting on it and several clean downs with a cloth.

I never deliberately try to damage any workdesks too hard, during some lighter tests (throwing a collection of secrets onto it from a distance, for example), it still held up without as well numerous visible signs of damage.

Finally, when I determined the noise outcome of the desk while it increased from a sitting position to standing as well as back once again, it was without a doubt the quietest we’ve examined yet. I can barely get it to make more than concerning 9.5 dB of noise, so if your most significant concern is the whirr of your electric motor, this is certainly the one for you.

Customer support

Currently, normally I do not include much regarding the customer support support of any kind of provided business, just because I really feel that as a whole if an item works the means its supposed to, I should not ever before have a factor to call them to begin with. And also while I wish I can say that held true during my experience with StandDesk, I simply can’t complete this review without discussing the many, apparently endless troubles I came across attempting to get my desk put together.

For beginners, the desk I was sent didn’t have any kind of memory phone included originally, which implied I had no other way of actually managing the up/down function on the desk itself. I called StandDesk concerning this issue, that got back to me around a day later with an apology and also an assurance that a brand-new one would certainly be shipped shortly.

Standdesk evaluation handset

The source of all our problems …
About 4 days later a handset showed up in the mail. The mobile originally turned on, however it wasn’t long before I noticed that none of the programmable switches functioned, nor did the down switch, however, for some factor the “memory” button took care of the down function simply fine. I called the company once more, as well as they apologized for the mixup and also said they would have a new panel as well as control box out to me within the week.

Over 2 weeks later on my brand-new panel and also control box showed up. When I installed them both the desk lastly began functioning the method it was expected to, however not after nearly a month of waiting and also to and fro with a company that couldn’t bear in mind to deliver a core element of their item inside the same box from the beginning.

Points to Think about

Regardless of its bankable functions, this stand up workdesk likewise has its own disadvantages. Because no single stand desk might record all of the attributes that you may need, you may take into consideration these in your decision-making.

Lack of a Bar as criterion

Not having a stabilizing bar is definitely not a deal-breaker, particularly considering several of our other favored desks such as the Completely Jarvis additionally don’t have one. In fact, this desk does have one if you want, but it is a paid add-on (extra on this later too).

The bar is seen by some as an obstacle, making it more challenging to place your legs conveniently listed below the desk. Others, on the other hand, find that they offer included stability, commonly essential when workdesks are totally expanded.

We have not check out any complaints of the security of this workdesk, so we do not think its something to truly be worried about, although if you really desired a workdesk with a bar after that we advise you take a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does offer a different add-on bar that you can include in the desk yourself, just for an extra $49.95.

Security

The security of a standing desk is among one of the most crucial facets of these desks. Without a stable workdesk you’ll find it difficult to concentrate, which can bring about you ending up being less curious about using the desk at standing height. To get the most effective return on your financial investment, you’ll wish to be happy when using the desk.

Since the StandDesk Simple is the very first workdesk that I have actually tested with an optional cross support, I will break down my stability examinations right into two areas. Both tests will certainly include the typical front to back shaking examination and also an entrusted to right wobble. The first will certainly lack the cross assistance as well as the secondly will certainly be with it. Just to note, StandDesk.co claims that the enhancement of the cross assistance can enhance stability by approximately 15%. I have no idea how they created that number.

Without Cross Assistance

Left to Right: The wobble test was a different scenario. StandDesk Simple was the second workdesk that I examined that tottered near the bottom with weight on the desktop computer. The very first was the IKEA Bekant. By the time it reached 36″ the rocking activity misbehaved. Beyond this point it would certainly influence your work.

With Cross Support

Front to Back: Including the cross support does not affect the rocking activity. The StandDesk Simple began to experienced a shaking motion at 36″. By 41″ the shaking activity misbehaved.

Delegated Right: Adding the cross support to the StandDesk improved the wobble motion for reduced heights. With the cross assistance the wobble activity really did not begin up until you reached 35″. By 39″ the wobble activity ended up being bad.

Note: It’s very crucial with adjustable standing workdesks to completely tighten all hardware. If there is equipment that is not completely limited, the activity experienced when included standing height will certainly be overemphasized. This is especially true with a workdesk framework that includes 32 bolts, there are far a lot of points at which the desk has an opportunity to relocate.

Verdict

Like all the Chinese bases we have actually checked in our labs, we need to tighten our recommendation on the StandDesk Pro to shorter users with narrower desktop computers, as the security simply isn’t there for a huge mass elevated high off the ground. American-made desks will certainly be much better fit to these applications, and also for a fairly apparent reason. Virtually all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German companies that designed this market, and their average people are a great deal taller than the average Eastern consumer, so they started making longer-stroke lifting legs a long period of time back. And they have even more robot automation, laser-cutting tools, and large experience making standing desk bases, it goes without saying.

However if you’re not too high, do not have an extreme amount of heavy devices on your desktop, and do not need as well wide of a workdesk, the StandDesk Pro will certainly offer you great bang for your buck.

All that could change with Yu’s guaranteed StandDesk Pro 2.0 layout that he expects to release sometime in the future. Initially we were told we ‘d see it by June 2018. Greater than a year later on it has yet to appear, as well as Yu states he’s had difficulty obtaining the product top quality he needs out of numerous Chinese manufacturing facilities he’s tried dealing with. The new layout is supposedly mosting likely to be much easier to put together as well as have a heftier crossbar design, to name a few refinements. He states the brand-new base will certainly be offered in both a “T-Leg” as well as “C-Leg” configuration, easing our concern concerning side-load stressing on the lifting columns.

If this new base ever involves market we’ll update you here. We’re not holding our breath any kind of longer as the most recent news on the business is that Yu shut the small Los Angeles workplace and has actually moved it to join with all its various other workers in southeast Asia.

In the meantime, a new $399 standing desk with outstanding performance has been present through the new joint venture between US-based iMovR and also China-based Eureka, the i1 electric standing workdesk. While limited in size and also color choices, it has taken the mantle away from StandDesk’s long-ago status as the best standing desk under $400.

The StandDesk was produced by millennials, is marketed straight at millennials, and has actually been demolished by millennials in remarkable volumes. While it lugs a ten-year service warranty (the lengthiest of any Chinese-made base), in this instance it’s not necessarily a trustworthy sign of the expected beneficial life of the training columns. But also for the cost, the StandDesk is a wonderful lower-cost alternative to the UpLift, Jarvis and also various other Chinese-made desks. Regardless of its stability problems this is a far much better product than the Autonomous SmartDesk or IKEA Bekant can ever intend to be, and a good value generally. It’s the mid-priced offering in the wide category of Chinese-made workdesks that is gaining customers from both its less expensive and more expensive peers.

StandDesk Building And Construction, Setup, and Gizmos

Developing the desk is quite easy if you follow the in-depth directions. Every one of the screws, bolts, washing machines, as well as spring washing machines been available in different bags that are noted with their location: tabletop, framework, and spares. There’s an included hex device for securing every one of the bolts into the framework, or, pop in a hex bit right into your power tool– simply beware not to over-tighten.

All of the components have a premium quality surface to them with rounded edges to stay clear of cut hands. Below is a shot of all the bolts that are fastened to the leg assembly– it’s not going anywhere!

Standdesk-Leg

The foot assembly additionally consists of height-adjustable rotation gears to support the front-to-back activity of the desk, which was very valuable for the carpeted home office flooring. I’m also making use of a flooring mat to protect the rug from chair wheel damages at resting height, and also press the chair back when I’m transitioning to standing height.

Standdesk-Foot

The deluxe controller was worth the financial investment. The buttons are all variable pressure set, suggesting the backwards and forwards arrowheads will certainly readjust the elevation by 1/10th of an inch with a solitary press, or continuously adjust the elevation by around 0.7 inches per second if you hold the switch for two secs. The memory switches are similar in design: push to recall the height setup, or hold the button down for five secs to save a brand-new height worth. I’m utilizing switch 1 for my resting position as well as switch 4 for my standing placement, which offers me 2 and also 3 for anything I may need in the future.

Standdesk-Memory-unit

Using my Standdesk

I’ve been making use of the brand-new desk for a few weeks and also have listed my initial perceptions:

The motors are quiet but can be listened to in the next room over. It takes probably 25 seconds for the desk to fully transition from sitting to standing based upon my presets.
I make use of an Ergotron side-by-side keep an eye on arm (specifically this LX version), causing the desk to get a little rocky when I move my weight against the keyboard. In knowledge, I should have purchased the crossbar upgrade for my workdesk after figuring out the weight of my screens. If you plan to do a double screen arrangement, obtain the bar.

Due to the fact that gravity presses the discs in a human spine, I require to raise the desk greater in the early morning and also lower it in the evening.

An anti-fatigue mat is absolutely necessary for long duration standing. I purchased an Octagonal floor covering from SmartCells, using rubber “cells” that are visualized below.

Efficiency

Despite any issues I might have had with the phone or the cookie-cutter design, basically every one of those problems washed away when I really came down to using this point.

Although I really did not think it was also feasible, the StandDesk in some way manages to be a lot more secure than the Jarvis, both at sitting and also standing elevations. Most days I like to run my Jarvis at max height while pushed versus my wall; not always due to the fact that it’s that shaky, yet just because I desire as much security as I can get.

The StandDesk one ups the gambit also further, confirming to be equally as stable on its own at standing height as the Jarvis is with wall support. This is all without the firm’s crossbar addition, which they assert includes much more security when bought as a part of the package deal.When it concerns weight resistance, the StandDesk shares yet even more stats with the Jarvis, being rated for as much as 350 pounds of weight capability.

I’ve been using the desk for about three weeks now for daily work (and also complying with standing desk best techniques), whether it’s keying out reviews such as this one from our desktop computer or a laptop every so often. The desk holds up well against non-coastered drinks, as well as the finish on top of the desk still feels equally as smooth and also slick as the day I opened it despite days of sweaty wrists wresting on it as well as several clean downs with a rag.

Though I never ever intentionally attempt to damage any workdesks as well hard, throughout some lighter examinations (throwing a set of tricks onto it from a distance, as an example), it still held up without a lot of visible indications of damage.

When I determined the sound outcome of the workdesk while it increased from a sitting position to standing and back again, it was by much the quietest we have actually examined. I might hardly get it to make more than regarding 9.5 dB of noise, so if your most significant issue is the whirr of your electric motor, this is definitely the one for you.

Customer Service

Now, typically I do not consist of much about the customer support support of any type of offered company, just since I really feel that generally if an item functions the method its expected to, I shouldn’t ever have a reason to call them in the first place. And also while I wish I could state that was the case during my experience with StandDesk, I simply can not complete this testimonial without discussing the various, seemingly unlimited problems I ran into trying to obtain my desk created.

For beginners, the desk I was sent out didn’t have any memory phone included originally, which implied I had no way of really regulating the up/down function on the desk itself. I got in touch with StandDesk concerning this issue, that returned to me around a day later on with an apology as well as a pledge that a brand-new one would be shipped out soon.

Standdesk review handset

The resource of all our problems …
Regarding four days later on a handset arrived in the mail. The mobile originally switched on, but it had not been long before I noticed that none of the programmable buttons worked, neither did the down switch, however, for some reason the “memory” switch handled the down function just fine. I got in touch with the business again, and they excused the mixup and also said they would have a brand-new panel and control box bent on me within the week.

Over 2 weeks later my brand-new panel and also control box showed up. As soon as I installed them both the desk ultimately started working the means it was intended to, yet not after practically a month of waiting and also to and fro with a business that could not bear in mind to deliver a core part of their product inside the exact same box from the outset.

Things to Consider

Despite its bankable features, this stand workdesk additionally has its very own drawbacks. Considering that no particular stand desk can record all of the attributes that you may need, you might think about these in your decision-making.

Lack of a Bar as requirement

Not having a maintaining bar is certainly not a deal-breaker, specifically thinking about several of our various other favored desks such as the Totally Jarvis additionally don’t have one. This workdesk does have one if you want, yet it is a paid add-on (extra on this later on also).

The bar is seen by some as an obstacle, making it harder to place your legs conveniently listed below the desk. Others, on the other hand, discover that they supply included stability, often critical when desks are fully extended.

We have not check out any complaints of the stability of this workdesk, so we don’t think its something to truly be worried concerning, although if you truly desired a workdesk with a bar then we suggest you have a look at the Varidesk ProDesk 60 Electric.

Conversely, StandDesk does supply a separate add-on bar that you can contribute to the desk on your own, just for an additional $49.95.

Stability

The stability of a standing desk is one of one of the most essential elements of these workdesks. Without a steady workdesk you’ll find it hard to focus, which could lead to you becoming less curious about utilizing the desk at standing elevation. To obtain the best return on your investment, you’ll wish to be happy when utilizing the desk.

Since the StandDesk Simple is the initial desk that I have actually examined with an optional cross support, I will break down my stability tests right into two areas. Both tests will certainly consist of the common front to back shaking test and a delegated appropriate wobble. The very first will certainly lack the cross assistance and also the second will be with it. Simply to keep in mind, StandDesk.co says that the addition of the cross assistance can boost security by up to 15%. I have no idea how they came up with that number.

Without Cross Support

Left to Right: The wobble test was a various scenario. StandDesk Simple was the 2nd desk that I examined that wobbled at the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the shaking movement was bad. Yet point it would certainly impact your work.

With Cross Support

Front to Back: Adding the cross support does not influence the rocking movement. The StandDesk Simple started to experienced a shaking movement at 36″. By 41″ the shaking motion misbehaved.

Delegated Right: Adding the cross assistance to the StandDesk boosted the wobble activity for reduced heights. With the cross support the wobble activity didn’t begin up until you reached 35″. By 39″ the wobble motion became negative.

Keep in mind: It’s very crucial with flexible standing desks to completely tighten all hardware. If there is equipment that is not entirely tight, the movement experienced when reached standing height will certainly be exaggerated. This is especially true with a desk framework that includes 32 screws, there are much a lot of factors at which the desk has an opportunity to relocate.

Conclusion

Like all the Chinese bases we’ve tested in our labs, we have to narrow our recommendation on the StandDesk Pro to shorter users with narrower desktops, as the security just isn’t there for a huge mass raised high off the ground. American-made workdesks will certainly be much better suited to these applications, as well as for a rather apparent reason. Essentially all American-made bases are made in US manufacturing facilities that are possessed by Swedish, Danish or German firms that designed this sector, as well as their typical citizens are a whole lot taller than the ordinary Eastern customer, so they started making longer-stroke training legs a long time back. And they have far more robot automation, laser-cutting tools, and sheer experience making standing desk bases, needless to say.

Yet if you’re not as well tall, do not have an inordinate amount of heavy devices on your desktop computer, and don’t require too wide of a desk, the StandDesk Pro will offer you great bang for your buck.

All that may transform with Yu’s promised StandDesk Pro 2.0 style that he anticipates to launch at some point in the future. Originally we were told we would certainly see it by June 2018. More than a year later on it has yet to appear, and Yu states he’s had problem getting the product top quality he requires out of numerous Chinese manufacturing facilities he’s attempted dealing with. The brand-new design is apparently going to be a lot easier to assemble as well as have a heftier crossbar style, among other improvements. He claims the brand-new base will certainly be offered in both a “T-Leg” and also “C-Leg” arrangement, easing our problem about side-load worrying on the training columns.

If this new base ever concerns market we’ll upgrade you right here. We’re not holding our breath any longer as the most recent information on the firm is that Yu closed the small Los Angeles office and also has actually relocated it to join with all its various other workers in southeast Asia.

In the meantime, a new $399 standing desk with outstanding performance has actually been present through the brand-new joint venture in between US-based iMovR as well as China-based Eureka, the i1 electric standing workdesk. While limited in dimension and also shade options, it has actually taken the mantle far from StandDesk’s long-ago condition as the most effective standing desk under $400.