The StandDesk was created by millennials, is marketed right at millennials, and has been demolished by millennials in remarkable quantities. While it lugs a ten-year service warranty (the lengthiest of any Chinese-made base), in this situation it’s not necessarily a trusted indication of the anticipated beneficial life of the lifting columns. For the price, the StandDesk is a fantastic lower-cost alternative to the UpLift, Jarvis and also other Chinese-made desks. Despite its stability concerns this is a far better item than the Autonomous SmartDesk or IKEA Bekant might ever wish to be, and also a good value overall. It’s the mid-priced offering in the broad group of Chinese-made desks that is winning over customers from both its less expensive as well as pricier peers.
StandDesk Building, Arrangement, and also Gadgets
Building the desk is quite straight forward if you comply with the detailed guidelines. All of the screws, bolts, washers, as well as spring washers can be found in different bags that are noted with their destination: tabletop, structure, and spares. There’s an included hex tool for attaching every one of the screws into the structure, or, pop in a hex bit into your power tool– just beware not to over-tighten.
All of the parts have a high quality finish to them with rounded corners to prevent cut hands. Below is a shot of all the bolts that are attached to the leg assembly– it’s not going anywhere!
Standdesk-Leg
The foot assembly additionally consists of height-adjustable turning equipments to maintain the front-to-back movement of the desk, which was very valuable for the carpeted office floor. I’m additionally making use of a floor mat to shield the carpeting from chair wheel damage at sitting height, and press the chair back when I’m transitioning to standing elevation.
Standdesk-Foot
The deluxe controller deserved the investment. The buttons are all variable stress set, implying the backwards and forwards arrows will certainly readjust the height by 1/10th of an inch with a solitary press, or constantly readjust the elevation by around 0.7 inches per second if you hold the button for two seconds. The memory switches are comparable in layout: push to recall the height setup, or hold the button down for 5 secs to keep a brand-new height worth. I’m utilizing switch 1 for my resting placement and also button 4 for my standing position, which provides me 2 and 3 for anything I may require in the future.
Standdesk-Memory-unit
Utilizing my Standdesk
I have actually been using the new desk for a couple of weeks as well as have documented my preliminary impressions:
The electric motors are quiet but can be listened to in the following room over. It takes maybe 25 secs for the desk to fully shift from sitting to standing based upon my presets.
I use an Ergotron side-by-side monitor arm (particularly this LX model), triggering the desk to get a little rocky when I shift my weight versus the keyboard. In hindsight, I need to have acquired the crossbar upgrade for my desk after determining the weight of my monitors. If you prepare to do a double display setup, obtain the bar.
Due to the fact that gravity compresses the discs in a human back, I require to elevate the desk greater in the early morning and also reduced it at night.
An anti-fatigue mat is definitely vital for long duration standing. I bought an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are envisioned below.
Efficiency
Regardless of any issues I may have had with the handset or the cookie-cutter design, virtually all of those issues washed away when I in fact got down to using this point.
Although I didn’t think it was also feasible, the StandDesk in some way handles to be a lot more steady than the Jarvis, both at resting and standing elevations. Many days I such as to run my Jarvis at max height while pushed against my wall; not always because it’s that wobbly, but just because I desire as much stability as I can get.
The StandDesk one ups the gambit also additionally, confirming to be equally as constant on its own at standing elevation as the Jarvis is with wall support. This is all without the company’s bar enhancement, which they assert includes much more security when acquired as a part of the plan deal.When it concerns weight resistance, the StandDesk shares yet much more stats with the Jarvis, being ranked for up to 350 pounds of weight capacity.
I have actually been making use of the desk for concerning 3 weeks now for daily job (and also complying with standing desk finest methods), whether it’s keying out evaluations such as this one from our desktop or a laptop every now and then. The desk holds up well against non-coastered beverages, and the coating on top of the desk still feels just as smooth and also slick as the day I opened it in spite of days of perspiring wrists wresting on it as well as numerous clean downs with a cloth.
I never purposefully attempt to dent any workdesks also hard, throughout some lighter tests (tossing a collection of tricks onto it from a range, for example), it still held up without also many noticeable signs of damages.
Finally, when I measured the sound output of the desk while it rose from a sitting placement to standing as well as back once again, it was without a doubt the quietest we’ve tested yet. I can hardly get it to make greater than about 9.5 dB of sound, so if your greatest problem is the whirr of your motor, this is certainly the one for you.
Customer support
Now, normally I do not include much about the customer service assistance of any provided business, only because I really feel that as a whole if a product functions the way its intended to, I should not ever before have a reason to call them in the first place. And while I wish I might state that held true during my experience with StandDesk, I merely can’t complete this evaluation without discussing the many, apparently endless troubles I experienced trying to obtain my desk assembled.
For starters, the desk I was sent out didn’t have any memory phone consisted of originally, which meant I had no chance of really managing the up/down function on the desk itself. I spoke to StandDesk about this issue, who returned to me around a day later on with an apology as well as a guarantee that a brand-new one would be shipped soon.
Standdesk review handset
The source of all our issues …
Concerning 4 days later on a mobile phone arrived in the mail. The handset initially turned on, however it had not been long prior to I noticed that none of the programmable buttons functioned, nor did the down button, but also for some factor the “memory” switch dealt with the down feature simply great. I got in touch with the company once more, and they apologized for the mixup and said they would certainly have a new panel and also control box out to me within the week.
Over two weeks later my new panel and control box arrived. Once I mounted them both the desk lastly started functioning the means it was expected to, yet not after nearly a month of waiting as well as to and fro with a company that could not remember to deliver a core component of their product inside the exact same box from the get-go.
Things to Think about
Despite its bankable features, this stand workdesk likewise has its very own drawbacks. Because no particular stand desk might catch all of the functions that you may need, you might take into consideration these in your decision-making.
Lack of a Crossbar as requirement
Not having a supporting bar is certainly not a deal-breaker, particularly thinking about several of our various other favored workdesks such as the Fully Jarvis likewise don’t have one. This desk does have one if you desire, but it is a paid add-on (a lot more on this later also).
The crossbar is seen by some as a limitation, making it harder to put your legs pleasantly below the desk. Others, on the other hand, find that they supply added stability, typically vital when workdesks are completely prolonged.
We have not read any grievances of the stability of this desk, so we don’t believe its something to truly be concerned about, although if you actually desired a workdesk with a crossbar then we recommend you take a look at the Varidesk ProDesk 60 Electric.
StandDesk does use a different add-on crossbar that you can add to the workdesk on your own, simply for an extra $49.95.
Security
The security of a standing desk is just one of one of the most crucial facets of these workdesks. Without a secure workdesk you’ll find it tough to focus, which could result in you ending up being much less curious about making use of the desk at standing height. To get the most effective return on your investment, you’ll wish to be happy when making use of the desk.
Because the StandDesk Simple is the initial desk that I have tested with an optional cross support, I will break down my security tests right into 2 areas. Both examinations will consist of the normal front to back shaking examination and a left to appropriate wobble. The initial will be without the cross assistance and also the second will certainly be with it. Just to keep in mind, StandDesk.co claims that the enhancement of the cross support can enhance security by up to 15%. I have no idea exactly how they generated that number.
Without Cross Assistance
Left to Right: The wobble examination was a different circumstance. StandDesk Simple was the 2nd desk that I examined that tottered near the bottom with weight on the desktop. The very first was the IKEA Bekant. By the time it reached 36″ the rocking movement was bad. Yet factor it would certainly influence your work.
With Cross Support
Front to Back: Adding the cross assistance does not affect the rocking activity. The StandDesk Simple started to experienced a rocking motion at 36″. By 41″ the rocking motion was bad.
Entrusted to Right: Including the cross assistance to the StandDesk improved the wobble activity for reduced heights. With the cross support the wobble motion didn’t begin until you got to 35″. By 39″ the wobble movement ended up being bad.
Note: It’s really vital with flexible standing desks to fully tighten all equipment. If there is hardware that is not totally limited, the movement experienced when reached standing height will be overemphasized. This is particularly true with a desk framework that includes 32 bolts, there are much a lot of factors at which the desk has an opportunity to move.
Conclusion
Like all the Chinese bases we’ve evaluated in our labs, we need to narrow our recommendation on the StandDesk Pro to shorter customers with narrower desktops, as the stability just isn’t there for a big mass elevated high off the ground. American-made desks will certainly be better fit to these applications, and for a rather evident reason. Practically all American-made bases are made in United States factories that are possessed by Swedish, Danish or German firms that invented this sector, as well as their typical residents are a whole lot taller than the average Asian consumer, so they started making longer-stroke lifting legs a long time earlier. As well as they have much more robotic automation, laser-cutting devices, and also sheer experience making standing workdesk bases, needless to say.
But if you’re not as well high, don’t have an extreme quantity of heavy devices on your desktop, and don’t need as well wide of a workdesk, the StandDesk Pro will give you great bang for your buck.
All that may change with Yu’s assured StandDesk Pro 2.0 design that he expects to release at some point in the future. Initially we were informed we would certainly see it by June 2018. Greater than a year later on it has yet to emerge, and Yu states he’s had problem getting the item quality he requires out of several Chinese factories he’s attempted dealing with. The brand-new style is apparently mosting likely to be much easier to put together as well as have a heftier crossbar design, to name a few refinements. He claims the new base will certainly be used in both a “T-Leg” and also “C-Leg” setup, relieving our issue about side-load worrying on the lifting columns.
If this new base ever before comes to market we’ll upgrade you here. We’re not holding our breath any longer as the most recent information on the company is that Yu closed the little Los Angeles office and has actually relocated it to join with all its various other employees in southeast Asia.
In the meantime, a brand-new $399 standing workdesk with outstanding efficiency has been present with the new joint endeavor in between US-based iMovR and China-based Eureka, the i1 electric standing workdesk. While limited in dimension and also color alternatives, it has actually taken the mantle away from StandDesk’s long-ago standing as the best standing desk under $400.