Argo Jarvis Desk

The StandDesk was produced by millennials, is marketed straight at millennials, and has been gobbled up by millennials in outstanding volumes. While it lugs a ten-year warranty (the lengthiest of any type of Chinese-made base), in this case it’s not necessarily a dependable sign of the anticipated beneficial life of the training columns. But also for the rate, the StandDesk is a wonderful lower-cost option to the UpLift, Jarvis and other Chinese-made workdesks. Despite its security problems this is a much much better product than the Autonomous SmartDesk or IKEA Bekant might ever hope to be, as well as a good value generally. It’s the mid-priced offering in the wide group of Chinese-made workdesks that is swaying customers from both its cheaper and costlier peers.

StandDesk Building, Setup, and Gadgets

Building the desk is pretty straight forward if you adhere to the detailed guidelines. Every one of the screws, screws, washers, and also springtime washers can be found in different bags that are marked with their location: table top, frame, and also spares. There’s a consisted of hex tool for fastening all of the bolts right into the frame, or, pop in a hex bit right into your power device– just be careful not to over-tighten.

All of the parts have an excellent quality surface to them with rounded edges to avoid cut hands. Below is a shot of all the screws that are attached to the leg assembly– it’s not going anywhere!


The foot assembly also consists of height-adjustable turning equipments to support the front-to-back motion of the desk, which was very practical for the carpeted office flooring. I’m additionally making use of a flooring mat to shield the rug from chair wheel damage at sitting elevation, as well as push the chair back when I’m transitioning to standing height.


The deluxe controller was worth the financial investment. The switches are all variable pressure set, meaning the up and down arrowheads will readjust the height by 1/10th of an inch with a solitary press, or constantly adjust the height by about 0.7 inches per second if you hold the switch for 2 seconds. The memory buttons are comparable in style: push to recall the elevation setting, or hold the button down for 5 secs to save a new elevation worth. I’m using button 1 for my sitting placement and button 4 for my standing position, which provides me 2 and 3 for anything I could require in the future.


Using my Standdesk

I have actually been making use of the new workdesk for a couple of weeks and have made a note of my first impressions:

The electric motors are quiet yet can be listened to in the following space over. It takes probably 25 secs for the desk to completely change from resting to standing based upon my presets.
I use an Ergotron side-by-side check arm (specifically this LX design), triggering the desk to get a little rough when I change my weight against the keyboard. In hindsight, I should have acquired the bar upgrade for my desk after figuring out the weight of my monitors. If you intend to do a double display configuration, get the bar.

Since gravity presses the discs in a human spine, I require to increase the desk greater in the early morning as well as reduced it in the evening.

An anti-fatigue floor covering is absolutely important for long period of time standing. I acquired an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are envisioned below.


In spite of any type of issues I may have had with the mobile phone or the cookie-cutter style, pretty much every one of those issues washed away as soon as I in fact came down to using this point.

Although I didn’t think it was also feasible, the StandDesk in some way manages to be a lot more steady than the Jarvis, both at resting and standing elevations. Most days I such as to run my Jarvis at max height while pressed versus my wall; not always because it’s that shaky, yet just because I want as much security as I can obtain.

The StandDesk one ups the gambit also further, proving to be just as consistent on its own at standing elevation as the Jarvis is with wall support. This is all without the company’s bar addition, which they declare adds a lot more security when acquired as a part of the package deal.When it comes to weight tolerance, the StandDesk shares yet much more stats with the Jarvis, being rated for as much as 350 pounds of weight capacity.

I have actually been using the desk for regarding three weeks now for daily work (as well as complying with standing desk finest practices), whether it’s keying out reviews similar to this one from our desktop computer or a laptop once in a while. The desk stands up well versus non-coastered drinks, as well as the coating on top of the desk still feels just as smooth and also glossy as the day I opened it in spite of days of perspiring wrists wresting on it and also several clean downs with a cloth.

I never ever purposefully try to damage any type of workdesks also hard, during some lighter tests (throwing a set of secrets onto it from a distance, for instance), it still held up without also lots of noticeable indicators of damage.

Lastly, when I determined the sound output of the desk while it increased from a resting position to standing as well as back again, it was by far the quietest we have actually checked yet. I can barely get it to make greater than about 9.5 dB of sound, so if your most significant problem is the whirr of your motor, this is certainly the one for you.

Customer Service

Currently, usually I do not include much about the client service support of any kind of given business, only because I really feel that as a whole if an item works the method its intended to, I shouldn’t ever before have a reason to call them to begin with. And while I wish I can state that held true throughout my experience with StandDesk, I merely can not complete this testimonial without discussing the countless, seemingly endless issues I encountered attempting to obtain my desk put together.

For beginners, the desk I was sent out didn’t have any memory phone included initially, which suggested I had no other way of in fact managing the up/down function on the desk itself. I spoke to StandDesk concerning this problem, who got back to me around a day later on with an apology and an assurance that a new one would certainly be shipped shortly.

Standdesk testimonial handset

The source of all our troubles …
Regarding four days later on a phone arrived in the mail. The phone originally switched on, yet it had not been long prior to I discovered that none of the programmable buttons worked, neither did the down button, however, for some reason the “memory” switch dealt with the down function just fine. I contacted the firm again, and also they excused the mixup and stated they would certainly have a brand-new panel as well as control box bent on me within the week.

Over two weeks later my brand-new panel and control box showed up. When I installed them both the desk finally began functioning the method it was intended to, but not after nearly a month of waiting as well as to and fro with a firm that couldn’t bear in mind to deliver a core part of their item inside the exact same box from the beginning.

Things to Take into consideration

Despite its bankable features, this stand workdesk likewise has its own disadvantages. Given that no singular stand desk can capture every one of the functions that you may require, you might think about these in your decision-making.

Lack of a Bar as standard

Not having a stabilizing bar is certainly not a deal-breaker, especially considering some of our other preferred workdesks such as the Fully Jarvis likewise don’t have one. This desk does have one if you desire, however it is a paid add-on (much more on this later on too).

The bar is seen by some as a hindrance, making it tougher to position your legs conveniently listed below the desk. Others, on the other hand, discover that they offer added stability, usually crucial when desks are completely prolonged.

We have not review any grievances of the security of this workdesk, so we don’t believe its something to actually be concerned about, although if you really wanted a desk with a bar after that we suggest you take a look at the Varidesk ProDesk 60 Electric.

StandDesk does provide a different add-on crossbar that you can include to the workdesk on your own, just for an additional $49.95.


The security of a standing workdesk is among the most important aspects of these workdesks. Without a stable workdesk you’ll discover it tough to focus, which can lead to you becoming much less curious about using the desk at standing height. To get the best return on your financial investment, you’ll want to be happy when utilizing the desk.

Due To The Fact That the StandDesk Simple is the very first workdesk that I have checked with an optional cross assistance, I will certainly break down my security examinations right into two areas. Both tests will include the typical front to back shaking examination as well as a delegated right wobble. The very first will certainly lack the cross assistance and the second will be with it. Simply to keep in mind, states that the enhancement of the cross assistance can increase stability by approximately 15%. I have no idea exactly how they thought of that number.

Without Cross Support

Left to Right: The wobble test was a different situation. StandDesk Simple was the 2nd workdesk that I examined that tottered at the bottom with weight on the desktop. The first was the IKEA Bekant. By the time it got to 36″ the rocking motion was bad. Yet factor it would influence your job.

With Cross Support

Front to Back: Adding the cross support does not influence the shaking activity. The StandDesk Simple began to experienced a rocking movement at 36″. By 41″ the rocking motion misbehaved.

Entrusted to Right: Adding the cross assistance to the StandDesk boosted the wobble activity for lower elevations. With the cross assistance the wobble activity really did not start until you reached 35″. By 39″ the wobble movement came to be negative.

Note: It’s extremely important with flexible standing desks to completely tighten all hardware. If there is equipment that is not entirely limited, the motion experienced when included standing height will be exaggerated. This is specifically real with a desk frame that includes 32 screws, there are far way too many factors at which the desk has a chance to relocate.


Like all the Chinese bases we have actually tested in our laboratories, we need to tighten our referral on the StandDesk Pro to much shorter users with narrower desktop computers, as the stability just isn’t there for a big mass boosted high off the ground. American-made desks will be better suited to these applications, and for a fairly evident factor. Essentially all American-made bases are made in US factories that are possessed by Swedish, Danish or German companies that created this sector, as well as their typical residents are a great deal taller than the average Oriental customer, so they began making longer-stroke training legs a very long time back. And also they have much more robotic automation, laser-cutting tools, as well as sheer experience making standing workdesk bases, it goes without saying.

If you’re not too tall, do not have an excessive quantity of hefty tools on your desktop computer, and do not require also vast of a workdesk, the StandDesk Pro will offer you excellent bang for your dollar.

All that might alter with Yu’s assured StandDesk Pro 2.0 style that he expects to release at some point in the future. Initially we were informed we ‘d see it by June 2018. Greater than a year later on it has yet to appear, and Yu states he’s had difficulty getting the item top quality he needs out of numerous Chinese manufacturing facilities he’s tried dealing with. The brand-new layout is allegedly going to be a lot easier to set up and also have a heftier crossbar design, among other improvements. He says the new base will certainly be supplied in both a “T-Leg” and “C-Leg” arrangement, minimizing our problem about side-load worrying on the training columns.

If this new base ever before pertains to market we’ll update you below. Yet we’re not holding our breath any kind of longer as the most current information on the company is that Yu shut the small Los Angeles workplace as well as has actually moved it to join with all its other employees in southeast Asia.

In the meantime, a new $399 standing desk with excellent performance has actually been present with the new joint venture in between US-based iMovR and China-based Eureka, the i1 electrical standing workdesk. While restricted in dimension as well as color alternatives, it has taken the mantle far from StandDesk’s long-ago standing as the most effective standing workdesk under $400.

Categories ST2
error: Content is protected !!