Stand Desk

The StandDesk was produced by millennials, is marketed right at millennials, and has been demolished by millennials in impressive quantities. While it lugs a ten-year service warranty (the lengthiest of any kind of Chinese-made base), in this case it’s not necessarily a trustworthy indicator of the expected valuable life of the training columns. However, for the price, the StandDesk is a terrific lower-cost option to the UpLift, Jarvis and other Chinese-made desks. Despite its stability issues this is a much better product than the Autonomous SmartDesk or IKEA Bekant could ever before hope to be, as well as a good value in general. It’s the mid-priced offering in the wide category of Chinese-made desks that is winning over clients from both its cheaper and more expensive peers.

StandDesk Construction, Setup, and Gadgets

Developing the desk is rather easy if you comply with the thorough guidelines. All of the screws, screws, washing machines, and also spring washing machines come in different bags that are marked with their location: tabletop, structure, as well as spares. There’s an included hex device for attaching every one of the screws right into the framework, or, pop in a hex bit into your power tool– simply be careful not to over-tighten.

Every one of the components have an excellent quality finish to them with rounded edges to avoid cut hands. Below is a shot of all the bolts that are secured to the leg setting up– it’s not going anywhere!


The foot setting up likewise includes height-adjustable turning gears to maintain the front-to-back motion of the desk, which was extremely practical for the carpeted office flooring. I’m additionally making use of a floor mat to safeguard the carpet from chair wheel damages at resting height, and also press the chair when I’m transitioning to standing height.


The luxurious controller deserved the investment. The buttons are all variable stress set, implying the up and down arrowheads will certainly adjust the height by 1/10th of an inch with a single press, or continually change the elevation by around 0.7 inches per 2nd if you hold the switch for 2 secs. The memory buttons are comparable in layout: push to recall the height setting, or hold the button down for 5 secs to keep a brand-new elevation value. I’m utilizing switch 1 for my resting placement and also switch 4 for my standing position, which offers me 2 and also 3 for anything I might require in the future.


Using my Standdesk

I have actually been using the new workdesk for a few weeks and have actually made a note of my initial perceptions:

The electric motors are quiet but can be listened to in the next room over. It takes probably 25 seconds for the desk to completely shift from sitting to standing based on my presets.
I utilize an Ergotron side-by-side keep track of arm (specifically this LX design), triggering the desk to get a little rocky when I move my weight versus the keyboard. In hindsight, I must have bought the bar upgrade for my workdesk after establishing the weight of my monitors. If you plan to do a twin display arrangement, get the bar.

Because gravity presses the discs in a human spinal column, I require to elevate the desk greater in the morning as well as reduced it in the evening.

An anti-fatigue mat is absolutely crucial for long period of time standing. I acquired an Octagonal floor covering from SmartCells, utilizing rubber “cells” that are visualized below.


Regardless of any kind of problems I might have had with the mobile or the cookie-cutter style, practically all of those concerns washed away once I in fact came down to utilizing this point.

Although I really did not think it was even feasible, the StandDesk somehow manages to be even more steady than the Jarvis, both at sitting and standing elevations. A lot of days I such as to run my Jarvis at max elevation while pushed versus my wall; not always because it’s that unsteady, yet just because I want as much stability as I can get.

The StandDesk one ups the gambit also additionally, showing to be equally as stable by itself at standing elevation as the Jarvis is with wall support. This is all without the business’s bar addition, which they declare adds a lot more stability when bought as a part of the bundle deal.When it concerns weight tolerance, the StandDesk shares yet much more statistics with the Jarvis, being rated for as much as 350 pounds of weight capability.

I have actually been making use of the desk for regarding 3 weeks now for day-to-day job (and following standing workdesk ideal practices), whether it’s keying out testimonials such as this one from our desktop or a laptop once in a while. The desk holds up well versus non-coastered beverages, as well as the surface in addition to the desk still feels just as smooth and slick as the day I opened it in spite of days of sweaty wrists wresting on it and also multiple wipe downs with a dustcloth.

Though I never ever purposefully try to damage any workdesks too hard, throughout some lighter tests (throwing a set of keys onto it from a distance, as an example), it still held up without too many noticeable indicators of damages.

When I determined the sound result of the desk while it climbed from a resting setting to standing as well as back once more, it was by far the quietest we’ve examined. I could hardly get it to make greater than about 9.5 dB of sound, so if your greatest concern is the whirr of your motor, this is most definitely the one for you.

Customer care

Now, normally I don’t consist of much concerning the customer service assistance of any kind of given firm, only since I feel that generally if a product functions the method its supposed to, I should not ever before have a factor to call them in the first place. As well as while I want I can say that held true throughout my experience with StandDesk, I just can not complete this evaluation without stating the numerous, apparently limitless issues I came across trying to obtain my desk assembled.

For starters, the desk I was sent really did not have any kind of memory mobile included originally, which implied I had no way of in fact regulating the up/down function on the desk itself. I called StandDesk concerning this problem, who returned to me around a day later on with an apology as well as a pledge that a brand-new one would be shipped out quickly.

Standdesk review handset

The resource of all our problems …
About 4 days later on a phone arrived in the mail. The mobile at first turned on, however it wasn’t long prior to I discovered that none of the programmable switches functioned, neither did the down switch, but for some reason the “memory” button handled the down feature just fine. I spoke to the business once more, and they excused the mixup and also said they would have a brand-new panel and also control box bent on me within the week.

Over 2 weeks later my brand-new panel and control box showed up. When I installed them both the desk ultimately began functioning the means it was supposed to, however not after almost a month of waiting and also to and fro with a company that couldn’t remember to ship a core element of their product inside the same box from the outset.

Points to Take into consideration

Regardless of its bankable attributes, this stand up workdesk also has its own drawbacks. Since no single stand desk can capture every one of the features that you might need, you might consider these in your decision-making.

Absence of a Crossbar as standard

Not having a maintaining bar is certainly not a deal-breaker, particularly considering some of our various other favorite desks such as the Totally Jarvis likewise do not have one. This workdesk does have one if you desire, yet it is a paid add-on (extra on this later on too).

The bar is seen by some as a barrier, making it more difficult to put your legs conveniently below the desk. Others, on the other hand, discover that they supply included stability, often critical when desks are fully extended.

We have not review any kind of problems of the security of this desk, so we don’t assume its something to truly be worried regarding, although if you actually wanted a desk with a crossbar then we suggest you have a look at the Varidesk ProDesk 60 Electric.

Alternatively, StandDesk does supply a separate add-on bar that you can contribute to the desk yourself, just for an additional $49.95.


The stability of a standing desk is among the most essential aspects of these desks. Without a steady workdesk you’ll discover it difficult to focus, which could result in you coming to be much less interested in utilizing the desk at standing height. To obtain the best return on your financial investment, you’ll wish to more than happy when using the desk.

Due To The Fact That the StandDesk Simple is the very first workdesk that I have actually tested with an optional cross assistance, I will certainly break down my security examinations right into two sections. Both examinations will consist of the common front to back shaking examination and also an entrusted to appropriate wobble. The first will lack the cross support as well as the second will certainly be with it. Just to note, claims that the addition of the cross support can increase security by as much as 15%. I have no concept how they thought of that number.

Without Cross Support

Left to Right: The wobble test was a various situation. StandDesk Simple was the second workdesk that I evaluated that wobbled at the bottom with weight on the desktop computer. The initial was the IKEA Bekant. By the time it reached 36″ the rocking motion was bad. Beyond this factor it would influence your job.

With Cross Support

Front to Back: Including the cross assistance does not impact the shaking motion. The StandDesk Simple began to experienced a shaking motion at 36″. By 41″ the rocking activity was bad.

Left to Right: Adding the cross assistance to the StandDesk improved the wobble movement for lower heights. With the cross support the wobble motion really did not begin up until you reached 35″. By 39″ the wobble motion came to be bad.

Keep in mind: It’s extremely crucial with adjustable standing workdesks to completely tighten all equipment. If there is equipment that is not entirely tight, the motion experienced when reached standing elevation will certainly be exaggerated. This is especially real with a desk framework that consists of 32 screws, there are much too many points at which the desk has an opportunity to relocate.


Like all the Chinese bases we have actually examined in our laboratories, we have to narrow our suggestion on the StandDesk Pro to much shorter customers with narrower desktops, as the stability simply isn’t there for a large mass raised high off the ground. American-made workdesks will certainly be better suited to these applications, and also for a relatively apparent reason. Virtually all American-made bases are made in United States manufacturing facilities that are owned by Swedish, Danish or German business that designed this sector, and their typical residents are a great deal taller than the typical Oriental consumer, so they started making longer-stroke lifting legs a long period of time ago. And they have far more robot automation, laser-cutting equipment, and also sheer experience making standing workdesk bases, it goes without saying.

If you’re not also tall, don’t have an inordinate amount of hefty tools on your desktop, and don’t require as well vast of a workdesk, the StandDesk Pro will give you great bang for your dollar.

All that may transform with Yu’s guaranteed StandDesk Pro 2.0 style that he expects to launch at some time in the future. Originally we were told we ‘d see it by June 2018. More than a year later on it has yet to materialize, as well as Yu states he’s had difficulty obtaining the item high quality he needs out of a number of Chinese manufacturing facilities he’s tried working with. The brand-new layout is apparently mosting likely to be much easier to assemble and also have a heftier crossbar layout, among other improvements. He states the brand-new base will be provided in both a “T-Leg” as well as “C-Leg” configuration, minimizing our issue concerning side-load worrying on the training columns.

If this new base ever comes to market we’ll update you right here. We’re not holding our breath any kind of longer as the most current information on the company is that Yu closed the small Los Angeles office as well as has transferred it to join with all its other staff members in southeast Asia.

In the meantime, a brand-new $399 standing workdesk with outstanding performance has been present through the new joint venture in between US-based iMovR and also China-based Eureka, the i1 electrical standing desk. While restricted in dimension as well as shade options, it has actually taken the mantle away from StandDesk’s long-ago status as the best standing workdesk under $400.

error: Content is protected !!